2016 Citroen C4 display

34
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Breakdown related to a lack of AdBlue® additive
When switching on the ignition, the SERVICE w
arning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
0 k

m   or   miles   -   ("NO   START   IN   0   miles"   means  
"

Starting
 p
revented").
The AdBlue
® tank  is  empty:  t he  s ystem  r equired  b
y
 
regulations   prevents   engine   starting.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA  
w

arning   lamp   flashes,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before   engine  
s

tarting   is   prevented   -   (For   example   "NO  
S

TART   IN   180   miles"   means   "Starting   will   be  
p

revented   in   180   miles).
When
  driving,   this   display   appears   every  
3

0   seconds   until   the   additive   tank   has   been  
t

opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Other wise you will not be able to restart your
engine.
For
 
more
 
information
 
on
 
topping-up   the  
Ad

Blue
® additive, refer to the corresponding s
ection. To
  be   able   to   start   the   engine,  
w

e   recommend   that   you   call   on  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   the   top-up   required.   If  
y

ou carry out the top-up yourself, it is
essential   to   add   at   least   3.8   litres   of  
Ad

Blue
® to the additive tank.
F
or
 
more   information   on   topping-up  
t

he AdBlue
® additive, refer to the
corresponding s ection.
Instruments

35
C4-2_en_Chap01_instruments-de-bord_ed02-2015
In the event of a fault with the the SCR emissions control system
In the event of the detection of a fault
The  UREA,   SERVICE   and   diagnostic   warning  
l

amps   comes   on,   accompanied   by   an   audible  
s

ignal   and   the   display   of   the   message  
"

Emissions
 f
ault".
The
  alert   is   triggered   when   driving,   when  
t

he   fault   is   detected   for   the   first   time,   then  
w

hen   switching   on   the   ignition   for   subsequent  
j

ourneys,   while   the   fault   persists. During an authorised driving phase

(between 650 miles and 0 miles) (1 100 km and 0 km)
If a fault with the SCR system is confirmed (after 3
0   miles   (50   km)   covered   with   the   permanent d

isplay   of   the   message   signalling   a   fault),   the
 S

ERVICE   and   engine   diagnostic   warning   lamps
 c

ome   on   and   the   UREA   warning   lamp   flashes,
 a

ccompanied   by   an   audible   signal   and   the
 t

emporary   display   in   the   instrument   panel   of
 "

NO   START   IN"   and   a   distance,   indicating   the
 r

emaining   range   express   in   miles   or   kilometres
 b

efore   engine   starting   is   prevented   -   (e.g.:   "NO
 S

TART   IN   350   miles"   means   "Starting   will   be
 p

revented   in   350   miles").
A
 
system
 
that
 
prevents
 
engine
 
starting
 
is
 
activated   automatically   from   650   miles   (1   100   km)   after   confirmation   of   a   fault   with   the   SCR   emissions  
c

ontrol
 
system.
 
Have
 
the
 
system
 
checked
 
by
 
a   CITROËN   dealer   or   a   qualified   workshop   as   soon   as   possible.
If
 
it
 
is
 
a
 
temporary
 
fault,
 
the
 
alert
 
d

isappears
 
during
 
the
 
next
 
journey,
 
a

fter
 
a
 
self
 
diagnosis
 
test
 
of
 
the
 
SCR
 
e

missions
 
control
 
system. While
  driving,   this   display   appears   every  3
0 seconds   while   the   fault   with   the   SCR   system  
p

ersists.
The
  alert   is   repeated   when   switching   on   the  
ig

nition.
You
  should   go   to   a   CITROËN   dealer   or   a  
q

ualified   workshop   as   soon   as   possible.
Other wise, you will not be able to restart your
engine.
1
Instruments

36
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Starting prevented
Every  time   the   ignition   is   switched   on,   the  
S

ERVICE   and   engine   diagnostic   warning  
l

amps   come   on   and   the   UREA   warning   lamp  
f

lashes,   accompanied   by   the   temporary   display  
o

f   "NO   START   IN"   and   0   miles   or   kilometres -  
(

"NO   START   IN   0   miles"   means   "Starting  
p

revented").
To
  be   able   to   start   the   engine,   you   must   call   on  
a

  CITROËN   dealer   or   a   qualified   workshop.
You
  have   exceeded   the   authorised  
d

riving   limit:   the   starting   prevention  
s

ystem   inhibits   engine   starting.
Distance recorders
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Trip distance recorder
Total distance recorder
Measures the total distance travelled by the
vehicle
  since   its   first   registration. Measures the distance travelled since it was
last
  reset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   and   hold   this  
b

utton   until   zeros   appear.
Instruments

37
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Setting the time and the time
format in the instrument
panel with the clock
On the type 1 instrument panel (without audio system),   to   adjust   the   time,   use   buttons   A and
B
  then   carry   out   the   operations   in   the   following  
o

rder:
F

p
ress buttons A and B  
s
imultaneously:
 t

he minutes   flash,
F
press A
  to   increase   the   minutes   or   B to
reduce
  the   minutes,
F

p
ress buttons A and B  
s
imultaneously:
 t

he hours flash,
F
press A to increase the hours or B to
reduce the hours, After
  approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.On
  the   type   1   instrument   panel   (without   audio  
s

ystem),   to   change   the   display   units,   use  
b

uttons A and B then carry out the operations
in   the   following   order:
F
p
ress buttons A and B  
s
imultaneously
 fo
r
 t

hree   seconds:   km/h   or   mph   flashes,
F
p
ress button A or B   to   change   the   units,
F
p
ress buttons A and B   simultaneously   to  
e

xit   from   setting   units.
After   approximately   30   seconds   without   any  
a

ction,   the   screen   returns   to   the   normal   display.
Setting units in the instrument
panel with the clock
Setting the time and units
in the multifunction screen
The other instrument panels are associated w
ith   an   audio   system   and   a   multifunction  
s

creen.   Refer   to   the   corresponding   screens.
F

p

ress buttons A and B
 
s

imultaneously:
 
2

4 H or 12 H is displayed and flashes,
F

p

ress button A or B
 
to
 
change
 
the
 
format,
F

p

ress buttons A and B
 
simultaneously
 
to
 
e

xit
 
from
 
time
 
setting.
1
Instruments

39
C4-2_en_Chap01_instruments-de-bord_ed02-2015
In the instrument panel, you can change the colour   of   its   dials   independently   from   that   of   the  
d

isplay   screens.
There
  are   five   colour   variants,   from   white   to  
b

lue.
F
 
P
ress   the   appropriate   button   as   many  
t

imes   as   needed   to   obtain   the   desired  
c

o l o u r.
A.
 F

or   the   dials.
B.
 F

or   the   display   screens.
Customising the instrument
panel colours
When driving at night, it allows certain instrument   panel   displays   to   be   switched   off   so  
a

s   to   reduce   visual   fatigue   for   the   the   driver.
The
  essential   driving   information,   such   as  
t

he   vehicle   speed,   warning   lamps,   automatic  
g

earbox   gear   selected,   cruise   control   or   speed  
l

imiter   information,   remains   on   in   the   instrument  
pan

el.
Black panel (comfortable
night driving display)
F With   the   vehicle   lighting   on,  p
ress   this   button   again   to  
a

ctivate   the   function.
F
 
P
ress   this   button   again   to  
d

eactivate   the   function.
Touch screen tablet
You can returns to the current display at
any  time   by   pressing   the   black   screen  
o

r   one   of   the   menu   buttons.
In
  automatic   illumination   of   headlamps  
m

ode,   the   "Black   panel"   function   is  
a

utomatically   deactivated   once   the  
a

mbient   light   level   attains   an   adequate  
l

evel.
1
Instruments

40
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Monochrome screen A
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-

c
urrent audio source,
-
 
t
rip   computer   (refer   to   the   corresponding  
s

ection),
-
 
a
lert   messages,
-
 
s
ettings   menus   for   the   screen   and   the  
v

ehicle
 e
quipment. From
  the   control   panel   of   your   audio   system,  
y

ou   can   press:
F
the "MENU" button for access to the main
menu ,
F

t
he "5" or " 6"
  buttons   to   scroll   through   the  
i

tems   on   the   screen,
F

t
he "7" or " 8"
  buttons   to   change   a   setting  
va

lue,
F
button A
  to   change   the   permanent  
a

pplication   (trip   computer,   audio   source...),
F
the "OK"
 

button   to   confirm,


or
F
the "Back" button to abandon the
operation
  in   progress.
Controls
F Press the "MENU" button for access
to the main menu , then press the "5"
or
"6 " buttons
  to   scroll   through   the   various  
m

enus:
-


" R A DIO ",
-


" M EDI A",
-
 
"
TRIP   COMPUTER",
-

"
DATE AND TIME",
-
 
"
LANGUAGES",
-
 
"
VEHICLE   PAR AM".
F

P
ress the "OK"
 
button   to   select   the   menu  
r

equired.
Main menu
Radio / Media
With the audio system switched on, once the "R ADIO"   or   "MEDIA"   menu   has   been   selected  
y

ou can activate or deactivate the functions
associated
  with   use   of   the   radio   (RDS,   Radio  
t

ext)   or   select   the   media   play   mode   (normal,  
r

andom,
 r
epeat).
For
  more   information   on   the   "R ADIO"   or  
"

MEDIA" application, refer to the "Audio and
telematics"
 se

ction.
Displays in the screen
Instruments

41
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Once the "TRIP COMPUTER" menu has been selected,   you   can   start   diagnostics   of   the   status  
o

f   the   equipment   (active,   not   active,   faulty).
Trip computer Date and time
Once the "DATE AND TIME" menu has been s
elected,   you   have   access   to   the   following  
se

ttings:
-
year,
-
 
m
onth,
-


d ay,
-
hours,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK" button to record the
change
  and   return   to   the   normal   display   or  
p

ress the "Back"
 
button   to   cancel.
Languages
Once the "LANGUAGES" menu has been selected,   you   can   choose   the   language   used   by  
t

he   display,   from   a   pre-defined   list.
Vehicle parameters
Once the " VEHICLE PAR AM" menu has been selected, you can activate or deactivate the
following
 e

quipment:
-
 
"
PARK  
B
R AKE"  
(
Automatic  
e
lectric  
p
arking  
b

rake;   refer   to   the   "Driving"   section).
-
 
"
BEND   LIGHTING"   (Directional   lighting;  
r

efer   to   the   "Lighting   and   visibility"   section),
-
 
"
AUTO   HEADLAMPS"   (Automatic  
i

llumination   of   headlamps;   refer   to   the  
"

Lighting   and   visibility"   section),
-
 
"
REAR   WIPE   ACT"   (Rear   wiper   coupled  
w

ith   reverse   gear;   refer   to   the   "Lighting   and  
v

isibility"
 s
ection),
-
 
"
GUIDE  
L
AMPS"  
(
Guide-me-home  
l
ighting;  
r

efer   to   the   "Lighting   and   visibility"   section),
-
 
"
ELECTRIC   BOOT"   (Selective   unlocking   of  
t

he   boot;   refer   to   the   "Access"   section),
-
 
"
CABIN   SELECT"   (Selective   unlocking;  
r

efer   to   the   "Access").
As
  a   safety   measure,   configuration   of  
t

he   multifunction   screen   by   the   driver  
m

ust   only   be   done   when   stationary.
1
Instruments

42
C4-2_en_Chap01_instruments-de-bord_ed02-2015
Monochrome screen C
This displays the following information:
-  t ime,
-


date,
-
 
a
mbient   temperature   (this   flashes   if   there   is  
a

  risk   of   ice),
-
 
p
arking   sensor   information,
-

c
urrent audio source,
-
 
t
elephone   or   Bluetooth   system   information,
-
 
t
rip   computer   (refer   to   the   corresponding  
s

ection),
-
 
a
lert   messages,
-
 
s
ettings   menus   for   the   screen   and   the  
v

ehicle
 e
quipment. From
  the   control   panel   of   your   audio   system,  y
ou   can   press:
F
button A to chooses between the display
of
  audio   information   in   full   screen   or   the  
s

hared   display   of   audio   and   trip   computer  
i

nformation,
F
the "MENU" button for access to the main
menu ,
F

t
he "5" or " 6"
  buttons   to   scroll   through   the  
i

tems   on   the   screen,
F

t
he "7" or " 8"
  buttons   to   change   a   setting  
va

lue,
F
the "OK"
 

button   to   confirm,


or
F
the "Back" button to abandon the
operation
  in   progress.
Controls
F Press the "MENU" button for access to the
main menu :
-
 
"
Multimedia",
-


"Telephone",
-
 
"
Trip   computer",
-
"

Bluetooth connection",
-
 "

Personalisation-configuration".
F

P
ress the " 7" or " 8" button to select the
menu
  required,   then   confirm   by   pressing  
t

he "OK"
 
button.
Main menuDisplays in the screen
Instruments