15
Cruise Control
Traction Control and StabiliTrak® Systems
Setting Cruise Control
1. Press the
On/Off button. The
Cruise Control symbol will illuminate in
white on the instrument cluster.
2. When traveling at the desired speed,
rotate the thumbwheel down to the
SET– position to set the speed. The
symbol will illuminate in green on the
instrument cluster.
Adjusting Cruise Control
RES+ Resume/Accelerate
Rotate the thumbwheel up to resume a set speed. When the system is active, rotate and
hold the thumbwheel up to increase speed.
SET– Set/Coast
When the system is active, rotate and hold the thumbwheel down to decrease speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory. Pressing
the brake pedal also will cancel the cruise control.
The cruise control set speed is erased when cruise control or the vehicle ignition is
turned off.
See Driving and Operating in your Owner Manual.
The traction control system limits wheel-spin and the StabiliTrak® stability control
system assists with directional control
of the vehicle in difficult driving condi
-tions. Both systems turn on automatically
every time the vehicle is started. Turn off
traction control if the vehicle is stuck and
rocking the vehicle is required.
Press the Traction Control/
StabiliTrak Off button on the center of
the instrument panel to turn traction
control on or off.
See Driving and Operating in your Owner Manual.
16
Automatic Transmission
Driving Assistance Systems
Driver Shift Control
Driver Shift Control is a manual mode that
allows the driver to shift gears manually.
This feature can be used to drive the vehicle
in a sportier manner, or to downshift when
driving on a downhill grade to provide
engine braking.
1. Move the shift lever left to the +/–
position.
2. Tap the shift lever forward (+) to upshift
or rearward (–) to downshift. The current
gear will be displayed on the Driver Information Center.
If vehicle speed is too high or too low for the requested gear, the shift will not occur.
When coming to a stop, the transmission will downshift automatically.
See Driving and Operating in your Owner Manual.
Forward Collision AlertF
The Vehicle Ahead indicator illuminates
in green on the instrument cluster when a
vehicle is detected and illuminates in amber
when following a vehicle ahead too closely.
If your vehicle approaches another vehicle
too rapidly, a visual alert flashes on the
Driver Information Center and rapid beeps
sound.
Press the Collision Alert button (A)
on the steering wheel to set the alert
timing to Far, Medium, Near or Off. The
setting is displayed on the Driver
Information Center.
Lane Departure Warning
F
When crossing a detected lane marking
without using a turn signal in that direction,
the
Lane Departure Warning indicator
flashes on the instrument panel and beeps
sound.
To turn the system on or off, press the Lane Departure Warning button (B) on the center of the instrument panel.Note:
The camera sensor is located ahead of the rearview mirror. Keep the windshield clean for proper
operation.
See Driving and Operating in your Owner Manual.
F Optional equipment
A
B
