2016 AUDI TT COUPE engine

Downloaded from www.Manualslib.com manuals search engine Multi Media Interface
Traffic safety
information
Audi recommends only performing certain Info ­
tainment system functions, such as entering a
destination, when the vehicle is stationary. Al­
ways be prepared to stop operating the Infotain­
ment system in the interest of your safety a nd
the safety o f other road users.
A WARNING
Only use the Infotainment sy ste m whe n traf­
fic cond itions pe rmi t an d alw ay s i n a way that
allow s you to m aintain complete control over
your ve hicl e.
Introduction
The Multi Media Interface, or MMI for short,
combines various
systems for communication,
navigation " and entertainment in your Audi. You
can operate the MMI using the MMI control pan­
el, the multifunction steering wheel or the voice
recognition
system".
Fig. 90 Control panel with On/Off knob
Switching the MMI on/
off
The MMI can be manually switched on and off.
..
i
-Switching on manu ally: press the On/Off knob
@ briefly
Qpage 95, fig. 90. Or: press the
lMENUI button© or one of the buttons to di­
rectly
open the menus@ .
Multi Media Interface
Wh en th e system is switched on, the last menu
that was selected is displayed and the last audio
source that was selected begins play ing.
-Swit ch ing off manually : press and hold the
On/Off knob@until the MMI switches off. If
the MMI has been switched off manually, it
does not switch on again automatically the
next time the ignition is switched on.
Additional On/Off knob functions:
- Adjusting the volum e:
turn the On/Off knob@
¢page 95, fig. 90.
-Muting (mute): br iefly press the On/Off knob.
-Selecting the previous/next function (for ex-
ample, a radio station/track ): br iefly press the
On/Off knob toward th e left ll>I.
-Fast forwarding/rewinding (for example,
tracks) :
press th e On/Off kno b longe r toward
the right t>l>I or left l A WARNING
!-=-
Adjust the volume of th e a udio system so that
signals from outside the vehicle, such as po ­
lice
and fire sirens, can be heard easily at all
t imes.
Tips
The MMI switches off automatically if th e e n­
gine
is not running and the battery is low.
Operating the MMI
Opening a menu
Fig . 91 Main menu
Open ing the main menu
•Press the IMENUI button© ~page 95, fig. 90.
The MMI menus (such as Radio ) are displayed
¢fig. 91. ....
95

Downloaded from www.Manualslib.com manuals search engine Multi Media Interface
Opening a menu directly
.. Press th e appli cable button CD c::> page 95,
fig. 90 in the di rection of the desired menu
(such as I RADIO b.
Selecting and confirming a function
Fig. 92 Operat ing
Selecting and confirming a function in a
menu/list
.,. CD Selecting the function : turn the control
knob to the desired function (such as selecting
a frequency).
•@ Confirming the selection : press the con trol
knob.
Returning to functions at higher levels
.. Press the I BACKI button@ c::> page 95, fig. 90.
96
Opening/closing the selection menu
Through the select ion menu, you can open addi­
tional functions within a menu item (such as Ra­
dio) .
Fig. 9 3 Central area with selectio n menu symbol
Fig.
94 Opened selection menu
Requireme nt: th e selec tion menu sym bo l must
be displayed on
the left side of the Infotainment
system c::>fig. 93 .
Opening the selection menu
•Press the left control button c::> fig . 93.
Closing the selection menu
• Press the rig ht control button c::> page 9 7,
fig. 95 to re tur n to the function one leve l up.

Downloaded from www.Manualslib.com manuals search engine ..... N
G: CX)
.....
"' U"I
.....
"' .....
Opening/closing the options menu
Using the options menu, you can select and con­
firm context-dependent functions as well as set­
tings within a
menu item (such as Radio) .
Fig. 95 Central area with options menu symbol
Fig.
96 Opened opti ons men u
Requirement: the options menu symbol G must
be displayed on the right side of the Infotain­
ment system¢ fig. 95.
Opening the options menu
""Press the right control button ¢fig. 95.
Closing the options menu
"" Press the left control button c> page 96, fig. 93
to return to the function one level up.
Multi Media Interface
Information on paths
This guide shows you at a glance the paths for
opening a desired
menu and its settings and
functions.
Example of a path
... Select: I RADIO I button> left control knob> FM.
Following the path
"" Press the I RADIO I button .
... Press the left control button .
... Turn the control knob to the FM menu item to
select it .
... Press the control knob to confirm the selected
FM menu item .
... The selected and confirmed function is execut­
ed. In this example, the FM frequency band is
set.
MMI touch
The MMI touch control pad is on the surface with
the control knob.
Fig. 97 Display whe n MMI touch is act ive
Fig. 98 Entering a navigation dest ination
If an operation is possible using the MMI touch
control pad, the symbol CD¢ fig. 97 will appear
in the Infotainment system display. Iii>
97

Downloaded from www.Manualslib.com manuals search engine Multi Media Interface
Entering numbers, letters, and symbols
Requirement: it must be possible to enter text or
numbers.
-
Write an individual letter (also: upper case/
lower case) or numbers/characters on the MMI
touch control pad using your finger. A character
recognized by the system will appear in the In­
fotainment system display@¢ fig. 97 and it
will confi rm with an audio signal, if necessary,
and transfer the character to the input fie ld.
- Entering spaces: move your finger across the
MMI touch control pad from left to right.
- Deleting characters: move your finger across
the MMI touch control pad from right to left.
-Selecting the input suggestion: press the con­
trol knob.
-Switching directly to the results list: turn the
control knob to the right
- Entering Cyrillic characters : press the right
control button. Select and confirm Change to
Cyrillic character set.
Moving
the crosshairs/map
Requirement: a map must be displayed
¢page 139, fig. 120.
- Showing/hiding the crosshairs : press the con­
trol knob to show the crosshairs. Press the
I BACK! button@¢ page 95, fig. 90 to hide the
crosshairs again.
-Moving the crosshairs in a standard map:
move the crosshairs shown in the desi red direc­
tion using your
finger on the MMI touch control
pad.
-Moving the standard map/online map: move
the crosshairs shown in the desired direction
using
two fingers on the MMI touch control pad
¢page 143.
-Moving the map quickly: pull two of your fin­
gers in the desired direction quickly along the
MMI touch control pad. The map will come to a
stop after several seconds.
Zooming in/out on the map
Requirement: a map must be disp layed
¢ page 139, fig. 120.
98
-Zooming in on the map: press the control knob
to show the crosshairs. Touch the MMI touch
control pad with two fingers and pull your fin ­
gers away from each other.
-Zooming out on the map : press the control
knob to show the crosshairs. Touch the MMI
touch control pad with two fingers and pull
your fingers together.
Adjusting the sound focus
Requirement: the Balance/Fader function must
be selected ¢page 169.
- Moving the crosshairs for sound focus: move
your
finger in the desired direction on the MMI
touch control pad.
Using the DVD main menu
Requirement: a DVD must be playing
¢page 159.
-Selecting a menu item: move your finger up/
down or left/right on the MMI touch control
pad.
-Confirming a selection: press the control knob.
@ Tips
The volume of the voice guidance prompts for
the MMI touch can be adjusted separately
¢page 170.
Control knob with
joystick function
The MMI control panel hos a control knob with
joystick function, which con
be used to move the
crosshairs on a map or adjust the sound focus.
Fig. 99 Operating concept for the control knob with joy·
stick function

Downloaded from www.Manualslib.com manuals search engine ..... N
G: CX)
.....
"' U"I
.....
"' .....
Opening/closing a selection menu
Push the control knob toward t he left to open the
selection menu c::> page 96.
Press the IBACKI b utton@ c::> page 95, fig. 90 to
retur n to the fun ction one level up. Or : pus h the
con trol
kno b to the rig ht to close the sele ct io n
menu.
Opening/closing the options menu
Push the control knob to the right to open the
options menu r::;;;page 97.
Press
the IBACKI button@ r::;;; page 95, fig. 90 to
retu rn to the function one level up. Or : push the
control knob t o the left to close the options
menu.
Displaying the input field*
Push the control knob up to reach th e beginning
of a list in the central area/inpu t field.
Switching to speller input*
W hen th e inp ut fie ld is already open, switch di­
rect ly
to the speller in the input fie ld by pushing
the control knob up again ¢page 99.
On the map
Requirement: a map must be disp laye d
r::;;;page 139, fig. 120.
Letter and number speller
Fig. 1 0 0 Spell er
-Entering ch aracters: tu rn the control knob to
the desired character using the character selec -
Multi Media Interface
-Displaying the input field : push the contro l
knob up
- Displaying
route guidance: w hen route guid ­
ance is active , yo u can also displ ay the route
guidance by pushing the control knob up
c::> page 132.
-
Zooming in/out on the map (zoom): turn the
control knob to the right/lef t to zoom in/out on
the map.
Adjusting the sound focus*
Requireme nt: the balance/fader function must
be
selected c::> page 169.
- Moving the sound focus crosshairs: press th e
co
ntrol knob t o sh ow the crossh airs. The cro ss­
h air s can now
be move d horizon tally . Press the
control knob again to move the crosshairs verti­
cally .
Using the DVD main menu
Requireme nt: a DVD must be playing
c::>page 159.
-Selecting a menu item: move the control knob
w i
th joystick function up or down or to the left
or right.
- Confirming a
selection: press the contro l knob .
tion@r;:;;; fig. 100. Press the control knob to
confirm th e cha racter. Your input is disp layed ..,.
99

Downloaded from www.Manualslib.com manuals search engine Multi Media Interface
in the input fie ld @ . When you have entered all
of the characters, select and confirm I LISTI(!).
Or: push the control knob down.
- Deleting characters : turn the speller to and press and hold the control knob down. Or:
press the right control button and select and
confirm Clear input field.
- Ente ring special cha
racters: select and con­
firm
I !&?I@ , laou 10orI123 I@ . Select and
confirm the desired special character (for ex­
ample, a hyphen or period) with the number
speller.
-Input assistance: in some cases such as in navi­
gation, an input is suggested based on logical
Symbol/Description Explanation
deduction of possibilities to complete your in­
put. You can select this suggestion by pushing
the control knob up .
- Results list: in some cases, such as in the direc­
tory,
the system switches automatically to the
results list based on l ogical deduction@ . Se­
lect and confirm a suggestion from the list.
Overview of symbols in the speller
The symbols in the letter/number speller are ex­
plained
in the fo llowing table:
CD ! LISTI Switch to the results list.
@ Input fie ld The current input is displayed.
® Results list
A list with suggestions based on the letters already entered is dis -
played .
@
+
Switches from lower case to upper case letters or from upper case
to lower case letters.
® E
Open additional spelle r options, such as Close speller , Clear input
field
or Change to Cyrilli c character set
® lt&?I Character sets and special characters are displayed .
0 iaoul Language-sp ecific special characters are displayed.
11231/IABCI Switches from letter to number input or from number to letter in-
® put.
® ............. A space is added i n the input fie ld .
@ @ Character selection The selected character is high lighted.
100

Downloaded from www.Manualslib.com manuals search engine ..... N
G: CX)
.....
"' U"I
.....
"' .....
Multi Media Interface
Menus and symbols
I~ :c
'~
Fig. 101 Menus and symbols
Symbol/Description Explanation
CD Selected text Selected function
@ TMC TMC/online traffic information reception ¢page 142
Network coverage for the active data connection¢ page 127
2G: GSM network
3G: UMTS network
® 2G/3G/LTE* LTE: LTE network
When a data connection is established, the symbol for an active da-
ta connection appears in the status line on the Infotainment system
display ¢ page 12 7
Signal
strength for the active data connection, or
@
Data connection signal PIN: enter the PIN (SIM)
strength bars* PUK: enter the PUK
SIM: insert the SIM card~ page 121
® Importing process Import/update the contacts in the directory or the call lists
® Battery Battery charge level for the connected cell phone
(j) Check boxes ~
Activate and deactivate specific functions by pressing the control
knob
® Arrow Access information by pressing the control knob
® Roaming Leave the mobile network for the connected cell phone or the in-
serted SIM card
@ Importing process Importing audio/video files to the Juk
ebox ¢page 151
@ Bluetooth* Bluetooth device connected¢ page 152 or¢ page 110
@ Scroll bars
Display of longer lists
Additional
functions for selection
@ Input field Information that can be changed using the letter/number speller
~page 99
101

Downloaded from www.Manualslib.com manuals search engine Multi Media Interface
Symbol/Description Explanation
@>
Cell phone signal Cell phone network signal strength for a connected cell phone
strength bars* ¢ page 110
@ Selection list Settings for the selected function that are accessed by pressing the
control knob
Free text search
Using the free text search, you can select the or­
der that the search terms are entered in the in­
put field.
Fig. 102 Input suggestion
The free text search is available in the Vehicle,
Media , Telephone, Navigation
and Audi con­
nect* menus.
Opening free text search
... Select: I MENU I button >desired menu item
(such as Telephone) .
... If necessary, push the control knob up to open
the input field Free text search for an entry
... Enter one or more search terms in any order in­
to the input field at the same time. The individ­
ual search terms must be separated by spaces
when entering.
Depending on the input, an input suggestion@
is displayed. Additional
entries that contain the
entered search term are listed In the results list
@.
Ifthe desired term is sti ll not displayed, enter
additional letters until it is disp layed.
It is often enough just to enter the first letters of
the search term in order for it to display in the re­
sults list. Write, for example in the Telephone
menu, the initials of the contact being searched
separated by a space.
102
Selecting the input suggestion
Requirement: an input suggestion must be dis­
played .
... MMI touch input*: press the control knob .
.,. Speller input: push the control knob up.
Selecting an entry from the results list
... MMI touch input* : turn the control knob down­
ward. Select and confirm an entry from the list .
... Speller input: select and confirm I LISTI. Or:
push the control knob down. Se lect and con­
firm an entry from the list.