Emerg enc y s it uati ons
The battery is vented to the outside so that not
gases enter the passenger compartment. Make
sure that the connected posit ive termina l clamps
on the jump start cable have sufficient contact
with metal.
A WARNING
Follow the warnings and instructions from
the jump start cable manufacturer to reduce
the risk of ser ious injuries and vehicle dam
age. If you are unsure about anything, call
roads ide assistance .
- The jump start cables must be long enough
so that the vehicles do not touch .
-
-Route the jump start cables so they cannot
get caught in the moving parts in the engine
compartment.
- Always read and follow the warnings before
che ck ing anything in the engine compart
ment
¢page 188.
(D Note
Connecting jump start cables incorrectly can
destroy the alternator .
- Always connect the positive terminal(+) to
the positive term inal( +) and the negative
terminal(-) to the negat ive termina l(-) on
the body ground po int, but not the negative
terminal on the battery.
- Make su re the screw pl ugs on the batte ry
ce lls are installed securely.
If not, tighten
the plugs before connecting the clamps to
the negat ive termina l on the battery .
- Please no te that the connecting p ro cess de
scribed below for the jump start cab les is in
tended for when your vehicle is being jump
started . If you are j ump starting another ve
hicle, do not connect the negative cable to
the negat ive termina l(·) on the drained
battery, but rather connect it to a large
metal component that is bolted secu rely to
the engine block, o r to the engine block it
se lf. If the battery in the vehicle being jump
started is no t vented to the o uts ide , the re is
a risk of exp losion due to hydrogen gas .
-Make su re that the conne cted positive te r
minal clamps have s ufficient contact with
me tal.
246
- Do not use the battery negative terminal for
jump starting or a ma lfunction cou ld occur
in the vehicle electrical system.
Towing with a tow truck
General hints
Your Audi requires special handling for towing .
The following information is to be used by com
merc ial tow truck operators who know how to op
erate their equipment safely .
-Never to w yo ur Audi. To w ing will cause d am ·
a ge to the engine and t ran sm ission.
- Never wrap the safet y chains or winch cable s
a roun d the brake l ines .
- To pre vent un nece ssary damage , your Audi
must be t ran sported with a flat bed tru ck.
- To l oad the vehicle on to the flat bed , use the
towing loop found in the vehicle tools and at
t ac h to the fro nt or re ar ancho rage
¢ page 247 and ¢ page 247.
A WARNING
A vehicle being towed is not safe for passen
gers . Never allow anyone to ride in a vehicle
being towed, for any reason .
