<( co .... N r--N .... 0 r--> co
the availab le cargo an d lug
gage loa d capaci ty o f yo ur vehi
c le.
.,,. Chec k the tire s idewall
(¢ page 204 , fig. 16 8) to deter
min e th e des ig nate d lo ad ratin g
for a speci fic tir e.
Wheel bolts and rims
Wheel b olts
Wheel bolts must be clean and loosen/t ighten
eas ily.
Rims
R ims with a bolted rim ring* or w ith bolted wheel
covers* consist of mu ltip le pieces . These compo
n ents we re bolted toge ther using specia l bolts
and a specia l procedure . You must not repair or
disassemble them¢
A.
A WARNING
-
Wheel bolts that are tightened or repaired in
correctly can become loose and result in loss
of vehicle control, which increases the risk of
an acc ident. For the correct tightening specif i
cation, refer to¢
page 235, After changing a
wheel .
-Always keep the wheel bolts and the
threads in the wheel hub clean and free of
grease.
- Only use wheel bolts that fit the rim.
-Always have damaged r ims repaired by an
authorized Audi dealer or authorized Aud i
Service Facility. Never repair or d isassemble
rims yourself, because this increases the risk
of an accident.
Winter tires
W inter tires s ignificantly improve the vehicle's
h andling w hen d riving in w inter condit ions. Be
cause of the ir constr uction (width, compound,
tread pattern), summe r tires provide less trac
tion on ice and snow.
Tir es and wheel s
.. Use winter tires on all four wheels.
.. On ly use winter tires that are approved for your
veh icle.
.. Please note that the maximum permitted
speed may be lower with winter tires¢,&. An
author ized Audi dealer or authorized Audi Serv
ice Facility can inform you about the maximum
perm itted speed for your t ires .
.. Check the tire p ressure afte r insta lling wheels
¢ page 214.
The effectiveness of winter tires is reduced great
ly when the tread is wo rn down to a depth of
0.157 i nch (4 mm). The characte ris tics of winter
t ir es also decrease g reatly as the ti re ages, re
gard less of the rema ining t read.
A WARNING
-- Never drive faster than the max imum per
mitted speed for your tires . This could cause
the t ires to heat up too much. This increases
the risk of an accident because it can cause
the t ire to burst.
- Always adapt your driving to the road and
traffic cond itions. Drive carefully and reduce
your speed on icy or slippery roads . Even
winter t ires can lose tract ion on black ice .
(® For the sake of the environment
Reinstall summer tires at the appropr iate
time, because they prov ide better handling
when roads are free of snow and ice. Summer
tires cause less road no ise, tire wear and fue l
consumpt ion.
(D Tips
You can also use all season tires instead of
winter tires. Please note that in some coun
tries where winter tires are required, on ly
winter tires w ith the
& symbo l may be per
mitted.
Snow chains
Snow chains improve traction in the snow.
.. Only install snow chains on the front wheels .
This applies a lso to vehicles with a ll wheel
drive*.
219
Emergency assistance
Taking the wheel off/installing the spare
Follow these instructions step-by-step for chang
ing the whee l.
F ig. 184 Chang ing a wheel: using the screw driver ha ndl e
(wit h th e bla de re m oved) to turn the bol ts
F ig . 185 Chang ing a whee l: alignment p in inside t he top
hole
Afte r you h ave loose ned a ll w heel bo lts and
raised t he ve hicl e off the groun d, remove and re
p lace the whee l as fo llows:
Removing the wheel
• Use the hexagonal so cket in the screwdriver
handle
t o comple tely remove the topmost
whee l bolt and se t it aside on a
clean surface
~fig. 184 .
• Scre w the th reade d end of the alignment pin
from the tool kit hand-tight into the empty bolt
hole
c> fig. 185 .
• The n remove the other wheel bolts as described
above.
• Takeoff the wh eel leav ing the a lignm ent pin in
t h e bolt ho le
¢ 0 .
Putting on the compact spare wheel
• Lift the spare wheel and carefully slide it ove r
the alignme nt pin to gui de it in place
c> 0 .
238
• Use the hexagonal socket in the screwdriver
handle to screw in and tighten a ll wheel bo lts
slightly .
• Remove the alignment pin and insert and tight
en the remaining wheel bo lt s light ly like the
rest .
• Tur n t he jack hand le co unter-clockw ise to lowe r
the vehicl e until t he ja ck is fu lly released .
• Use the wheel bo lt wren ch to tig hte n all wheel
bolts firm ly¢
page 236. T igh ten them cro ss
wise,
from one bo lt to t he (a pprox ima tely) op
posite one, to keep the wheel centered.
(D Note
W hen re mov ing o r installin g the w heel, the
rim co uld hit the bra ke r otor an d damage t he
r otor . Work care fully and h ave a second per
son he lp yo u.
(D Tips
Neve r use the he xagonal socke t in the han dle
of the sc rew drive r to loosen or t ighten the
whee l bolts .
- Pull the reve rsible blade from the screwdr iv
er befo re yo u use t he hexagona l so cket in
t h e handle to t urn the whee l bolts.
- W he n mo unting tires with
unidirectional
tread design
make sure the trea d pattern is
pointed t he right way~
page 238.
-Th e wheel bolts s ho uld be clean an d easy to
t u rn. Check fo r dirt and corrosion o n the
mati ng surfaces of both the wheel and the
hub. Remove all dirt from these s urfaces be
fore r emounting the whee l.
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the
right direction .
Using a spare tire with a tread pattern
intended for use in a specific direction
When using a spare tire wit h a tread patter n in
te nded for use in a specific direction, please note
the followi ng:
- The direction of rotation is marked by an arrow
on the side of the tire. ..,.
