2016 AUDI A3 CABRIOLET belt

Child safety
Description
The lower anchorage positions are marked for
quick locating .
Fig. 151 Lower an ch orages, cove rs marked
Fig. 152 Rear seats: lower anchorage bracke t locations
Lowe r anchor ag es
The circular mark ings on the rea r seat he lp you to
ident ify the location of lower anchorages for the
two outboard seating positions
r=> fig. 151. The
LATCH lower universal anchorage attachment
points are between the rear seatback and rear
seat cushion.
Remove the covers
r=> fig. 151 to access the lower
anchorage attachment points.
The lower anchorage attachment poi nts are visi­
b le
r=> fig. 152.
Lower ancho rages secure the ch ild rest raint in
the sea t witho ut using the vehicle 's safety belts.
Anchorages provide a secure and easy-to-use at­
tachment and minimize the possibility of improp­
er child restraint installation .
All ch ild rest raints manufactured after Septem ­
ber 1, 2002, must have lowe r anchorage at tach­
ments for the
LATCH sys tem .
180
Please remember that the lower anchorage
points are on ly intended for installation and at­
tachment of child restraints specif ically certified
for use with
LATCH lower anchorages . Child re ­
straints that are not equipped with the lower an­
chorage attachments can still be installed in
compliance with t he ch ild restraint manufactur­
er's instructions on using vehicle safety belts .
.&_ WARNING
Imp roper use of LATCH lower anchorages can
cause serious personal inju ry in an accident.
- Always carefully follow the ch ild restraints
manufact urer's instructions for proper in­
stallat ion of the chi ld restraint and proper
use of the lower anchorages or sa fety belts
in your vehicle.
- Never secure or attach any luggage o r othe r
items to the
LATCH lower anchorages .
- Always read and heed the important infor­
mation about child restraints in this chapter
and WARN INGS
~page 165, Child safety.
Installing a child restraint with LATCH
lower anchorages
Applies to : vehicles with Top Tether
Whenever you install a child restraint always fol­
low the child restraint manufacturer's instruc­
tions.
Fig. 153 Lowe r anchorages: p rope r mount ing
Mounting
.., Make sure the seatback of the rear seat bench
is in the upright pos ition and secure ly latched
in place .
.., Attach both hook-on connectors w ith the spr ing
catch release on the child safety seat o nto the .,.

<( co ..... N
" N ..... 0 r--. > 00
LATCH lower anchorage so that the connectors
lock into place
¢fi g. 153 .
.. Pull on the connector attachments to make
sure they are properly attached to the LATCH
lower anchorage .
.. Pull straps tight following the child restraint
manufacturer's instructions.
R elea sing
.. Loosen the tension on the straps following the
child restraint manufacturer's instructions.
.. Depress the spring catches to release the an­
chorage hooks from the lower anchorages.
Remember: Use tether straps to help keep the
child restraint firmly in place.
A WARNING
Improper use of the LATCH system can in­
crease the risk of serious pe rsonal injury and
death in an acc ident.
- These anchors were developed only for child safety seats using the "LATCH" system.
- Never attach other child safety seats, belts
or othe r objects to these anchors .
- Always make sure that you hear a click when
latch ing the seat in place. If you do not hear
a click the seat is not secure and could fly
forward and h it the interior of t he vehicle,
o r be ejected from the vehicle.
A WARNING
Improper installatio n of c hild rest rai nts will
increase t he r is k of i njury in an a cc ident.
- Always follow the child restra int system
man ufacturer's inst ru ct ions for proper in ­
sta llation of the child res tra int system and
pro per use of tether straps as well as the
lower anchorages or safety be lts in your
ve­
hicle.
- Always read and heed the important infor­
mation and WARNINGS about child safety
and the insta llation of chi ld restraint sys ­
tems ¢
page 165, Child safety.
Child sa fety
Tether anchors and tether straps
F ig. 154 Tether anchors: behind the rear seat backrests
The tether anchors for the rear seating positions
are located on the rear seat backrests¢
fig. 154.
A tether is a straight or V-shaped strap that at­
taches the top part of a child restraint to special
anchorage points in the vehicle.
T he purpose of the tether is to reduce the for ­
ward movement of the child restraint in a crash,
in order to help reduce the risk of head injury
that could be caused by striking the vehicle inte­
r ior.
Forward facing child restraints manufactured af­
ter September 1, 1999, are required by U.S . fed­
era l regulations to comply with new child head
movement pe rformance requ irements. These
new performance requ irements make a tether
necessary on most new chi ld safety sea ts.
A WARNING
I mp roper installa tion of child restra ints w ill
i nc rease the risk o f injury and dea th in a
crash.
- Always follow the instru ctions prov ided by
the man ufa ct u rer of the ch ild restrain t you
i n tend to insta ll in your A udi.
- I mp roper use of chi ld restrain t ancho rs ( in­
cluding tether anchors) can lead to injury in
a co llision. The anchors are designed to
withstand only those loads imposed
by cor­
rectly fitted ch ild restraints.
- Never mo unt two child rest rai nt systems on
one LATC H lower anchor point.
- Never attach two child restra int systems to
one tether strap or tether anchorage .
181

Child safety
-Never attach a tether strap to a tie-down
hook in the luggage compartment.
- Never use child restraint tether anchorages
to secure safety belts or other kinds of occu­
pant restraints.
- Never secure or attach any luggage or other
items to the LATCH lower anchorages or to
the tether anchors.
- If you must install a rearward facing child
safety seat on the front passenger seat be­
cause of exceptional circumstances and the
PAS SEN G ER AIR BAG OFF light does not
come on and stay on, immed iate ly install
the rear-fac ing ch ild safety seat in a rea r
seat ing pos ition and have the airbag system
inspected by your Audi dealer.
Installing the upper tether strap on the
anchorage
Fig. 155 Tet her strap: proper routing and mounting
Installing th e teth er strap
.,. Release or deploy the tether strap on the child
restra int acco rding to the child restra int manu­
fac ture r's instruct ions.
.,. Un lock the backrest and fold it slightly forward
¢ page 58and locate the tether anchor behind
the rear seat backrest.
.,. Raise the head restraint behind the child safety
seat.
.,. Gu ide the upper tether strap under or on both
s ides of the rea r head restra int (depending on
the child safety seat model) .
.,. Attach the tether strap ancho rage hook into
the open ing of the tether anchorage.
.,. Pull on the tether strap hook so that the spring
catch of the hook is engaged.
182
.,. Straighten the backrest back up into its upright
position and press it firmly into the locking
mechanism.
.,. Tighten the tether strap firmly following the
child restraint manufacturer's instructions.
Releasi ng th e tet her strap
.,. Loosen the tension on the tethe r strap fo llow­
ing the child restraint manufacturer's instruc­
tions.
.,. Depress the spring catch on the hook and re­
lease it from the anchorage.
(D Note
If you leave the child restraint with the tether
strap firmly installed for several days, this
could leave a mark on the upholstery on the
seat cushion and backrest in the area where
the tether strap was installed. The upholstery
would also be permanently stretched a round
the tether s trap. This applies especially to
l eather seats.
Using tether straps on rearward-facing
child restraints
Currently, few rear-facing child restraint systems
come with a tether. Please read and heed the
ch ild restraint system manufacturer's i nstruc­
tions carefully to determine how to properly in­
stall the tether.
&_ WARNING
A child in a rearward-facing child safety seat installed on the front passenger seat will be
seriously inju red and can be k illed if the front
airbag inf lates -even with an Advanced Airbag
System.
- The inflating airbag will h it the child safety
seat or infant carrier with great force and
will smash the child safety seat and child aga inst the backrest, center armrest, or
door.
- If you m ust install a rearward facing child
safety seat on the front passenger seat be­
cause of exceptional circumstances and the
PA SSENGER A IR BA G OFF light does not
come on and stay on, immediately install

<( co .... N ,.__
N .... 0 ,.__
> co
the rear-facing child safety seat in a rear
seating position and have the airbag system
inspected by your Audi dealer.
Additional information
Sources of information about child
restraints and their use
There are a number of sources of additional in­
formation about child restraint selection, instal­
lation and use:
NHTSA advises that the best child safety seat is
the one that fits your child and fits in your vehi­
cle, and that you will use correctly and consis­
tently.
Try before you buy!
U.S National Highway Traffic Safety Administra­
tion
Tel.: 1-888-327-4236 (TTY: 1-800-424-9153)
http :/ /www.nhtsa.gov
http :/ /www.safercar .gov
National SAFE KIDS Campaign
Tel.: (202) 662-0600
http :/ /www.safekids.org
Safety BeltSafe U.S.A
Tel.: (800) 745 -SAFE (English)
Tel.: (800) 747-SANO (Spanish)
http :/ /www.carseat .org
Transport Canada Information Centre
Tel.: 1-800-333-0371 or call 1-613-998-8616 if
you are in the Ottawa area
http ://www .tc.gc.ca/ eng/roadsa fety/ menu .htm
Audi Customer Relations
Tel.: (800) 822-2834
Child safety
183

<( co .... N ,.__
N .... 0 ,.__
> co
-Keep children away from the engine com­
partment.
- Never spill fluids on a hot engine. These flu­
ids (such as the freeze protection contained
in the coolant) can catch fire .
- Avoid short circuits in the e lectrical system,
especially the battery.
- When working in the engine compartment,
remember that the radiator fan can switch
on even if the ignition is switched off, which
increases the risk of personal injury.
- Never open the cap on the coolant expan­
sion tank when the engine is warm. The
cooling system is under pressure.
- To protect your face, hands, and arms from
hot steam or coolant, cover the cap with a
large cloth when opening.
- Do not remove the engine cover under any
circumstances . This increases the risk of
burns.
- If tests need to be performed w ith the en­
gine running, there is additional danger due
to moving components (such as the ribbed
belt, alternator and radiator fan) and from
t he high vo ltage ig nition system.
- Never reach into the radiator fan . The e lec­
t ric a uxiliary fan is cont rolled by tempera­
t ur e and can switch on sudde nly.
- Pay atte ntion to the fo llow ing warnings list­
ed when wo rk on the fuel system or on t he
ele ct rical eq uipment is requ ired.
- Always d isconnect the ve hicle battery
from the vehicle electrical system
- Do not smoke
- Never work near open flames
- Always have a working fire ex tinguisher
nearby
- T o red uce the risk of e lec tric shoc k and in­
jury, neve r touch the followi ng components
when the eng ine is r unning or is being star t­
ed :
- Ignition cable
- Other components in the electronic high
voltage ignition system
- If you must check or perform work on the
engine while it is runn ing:
Ch eck ing and Filling
-Set the parking brake and place the selec­
tor lever in the P (park) posit ion first.
- Always proceed with extreme caution so
that clothing, jewelry or long hair do not become caught in the radiator fan, fan
belt or other moving components or do
not come into con tact with ho t compo­
nen ts . Tie bac k long hair befo re beginn ing
work and do not wea r clothing that can
hang down into t he engine.
- Lim it yo ur exposure to exhaust and chemi­
cals to as short a time as possible
~ .&. .
&_ WARNING
Ca lifo rnia Proposition 65 Warning:
- E ngine exhaust, some of its const ituents,
and certa in vehicle components conta in or
emit chemi cals know n to the State of Cali ­
forni a to ca use cance r and birth defects and
reproductive harm. In add ition, cert ain flu ­
ids contained in vehicles and certain prod­
ucts of component wea r contain or em it
chemicals known to the State o f Californ ia
to cause cancer and birth defects or other reproductive harm .
- Battery posts, term inals and related acces­
sories contain lead and lead compounds,
chemicals know n to the State of Californ ia
to cause cancer and reproductive harms .
Wash hands afte r handling .
(D Note
When filling fluids, be sure not to m ix the f lu­
i ds up. Otherwise severe malfunctions and en­
gine damage will occur .
@) For the sake of the environment
You should regularly check the ground under
your vehicle i n order to detect leaks quic kly. If
the re are visible spots from o il or other fluids,
bring your veh icle to an authorized Audi deal­
er o r autho rize d Aud i Serv ice Facility to be
chec ke d .
189

Care and cleaning
Component Situation Solution
Power top
Deposits Clean water, power top cleaning product , if necessary.
Clean with the grain of the fabric using a soft brush and al- low to air dry.
Wind deflector Deposits Water, mild soap solution,
if necessaryal
Decorative parts/ Deposits Mild soap solution a>, a cleaning solution suitable for stain-
Trims less steel, if necessary
Paint Paint damage Refer to the paint number on the vehicle data label, repair
with touch up paint
r:!) page 250
Spilled fuel Rinse with water immediately
Surface r ust Rust remover, then protect with hard wax; for questions,
consult an authorized Audi dealer or authorized Audi Serv-
ice Facility.
Corrosion H
ave it removed by an authorized Aud i dealer or author-
ized Audi Service Facility.
Water no longer Protect with hard wax (at least twice per year)
beads on the surface
of clean paint
No shine even though Treat with suitable polish; then apply paint protectant if
paint has been pro- the polish that was used does not contain any protectant
tected/pa int looks
poor
Deposits such as in- Dampen with water immediately and remove with a micro-
sects, bird droppings,
fiber cloth
tree sap and road salt
Grease-based con- Remove
immediately with a mild soap solution a) and a
taminants such as soft cloth
cosmetics or sunblock
Carbon parts Deposits clean the same way as painted parts ~ page 224
Decorative decals Deposits Soft
sponge with a mild soap solution al
a) Mild soap so lution: maxim um two tablespoons of neutral soap in l quar t (l lite r) of water
Internal cleaning
Component Situation Solution
Windows
Deposits Glass cleaner, then wipe dry
Decorative parts/ Deposits Mild
soap solutiona )
Trims
Plastic parts
Deposits Damp cloth
Heavier deposits Mild soap so lution a>, detergent-free p lastic clean ing solu -
tion, if necessary
Displays Deposits Soft cloth with LCD cleaner
Controls Deposits Soft
brush, then a soft cloth with a mild soap so lutional
Safety belts Deposits Mild soap so lution a>, allow to dry before letting them re-
tract
226

Care and cleaning
- Never use gasoline, spot remover, ben­
zene, paint thinner or other solvents to
remove.
- Door window s
- Remove snow and ice on windows and ex-
terior mirrors with a p lastic scraper . To
avoid sc ratches, move the scrape r only in
one direction and not back and forth .
- Never remove snow or ice from door win­
dows and m irrors using warm or hot water
because this could cause cracks to form.
- To avoid damage to the rear w indow de­
fogge r, do not apply any stickers on the
heating w ires on the inside of the window.
- Decorati ve parts /trim
- Never use chrome care or cleaning prod- ucts.
- Paint
- To reduce the risk of scratches, the vehicle
must be free of dirt and dust before pol­
ishing or waxing.
- To prevent pa int damage, do not polish or
wax the veh icle in direct sunlight.
- To reduce the risk of pa int damage, do not
polish away rust spots .
- Remove cosmetics and sunscreen immedi­
ately- these could damage the paint.
- Displays
- To avoid scratches, do not use dry cleaning
methods on displays.
- Controls
- Make sure tha t no fluids enter the con-
trols, because this could ca use damage .
- Safet y belt s
- Do not remove the safety belts to clean them.
- Never clean safety belts or their compo­ nents chemically or with corrosive fl uids
or so lvents and never allow sharp objects
to come into contact w ith the safety belts .
Th is could cause damage to the belt web­
bing.
- If there is damage to the webbing, the
connect ions, the retractors or the buckles,
have them replaced by an author ized Audi
dealer or author ized Audi Service Facility.
- Textiles /artificial leather / Alcantara
228
- Never treat art ificial leathe r/ A lcantara
with leather ca re products, solvents, f loor
polish, shoe polish, spot remove o r similar
products.
- Have a specialist remove stubborn stains
to prevent damage.
- Never use steam cleaners, brushes, hard
sponges, etc . when cleaning .
- Do not turn on the seat heating* to dry the seat.
- Objects w ith sharp edges s uch as zippers,
rivets on clothing or be lts can cause dam­
age to the surface .
- Open hook and loop fasteners, for exam­ ple on clothing, can damage seat covers.
Make sure hook and loop fasteners are
closed.
- Natural le ather
- Never treat leather with solvents, floor
polish, shoe polish, spot remover or sim i­
lar p roducts.
- Objects w ith sharp edges such as zippe rs,
rivets on clothing or be lts can cause dam­
age to the surface.
- Never use steam cleaners, brushes, hard
sponges, etc. when cleaning.
- Do not turn on the seat heating * to dry the
seat .
- To help prevent the leather from fad ing,
do not leave the vehicle in d irect sunlight
for long periods of time.
If leav ing the ve­
h icl e parked fo r long pe riods of time, you
should cover the lea the r to pro te ct it from
d irec t sunlight .
(D Tips
-Insects are easier to remove from paint that
has been freshly waxed.
- Regular waxing can prevent rust spots from
forming.
Placing your vehicle out
of service
If you would like to take your vehicle out of serv­
ice for a longer time, contact your authorized
Audi dealer or qualified repair facility. They will
advise you of important measures, such as ..,.

<( co ..... N
" N ..... 0 r--. > 00
-Some of the equipment listed in the follow­
ing tables applies only to certain model ver­
s ions or certain optional equipment .
Interior fuse assignment
Fig. 188 Vehicle interior: fuse assignment
No. Equipment
Fl Engine components
F2 Seat
adjustment
F3 Power top hydraulic pump
F4 MMI control panel, MMI components
FS Gateway
F6 Selector
lever (automatic transmission)
.... ~ N
0
>
"' (0
F7 Climate/heating control, auxiliary heating,
rear w
indow defogger relay
Diagnosis, electromechanical parking
FB brake switch, light switch
, rain/light sen-
sor, inter ior lighting, communications box,
anti-theft alarm system
F9 Steering column switch module
FlO Display
Fll Reversible driver's side safety belt tension
-
ers
F12 MMI area
F13 Damper control module/ service plug
No.
Fl4
FlS
Fl6
F 17
FlB
F19
F20
F23
F 24
F2 5
F2 6
F27
F28
F29
F 31
F32
F 33
F 34
F35
F 36
F37
F38
F39
F40
F41
F42
F4 3
F44
F 47
Fuses and bulbs
Equipment
Climate control system blower
Electronic steering column lock
MMI area
Instrument cluster
Rearview camera
Convince key system control module, tank
system
Tank system
Exterior lighting, heated washer fluid noz -
zles
Panorama sunroof/ power top control
module, power top latch (Cabriolet)
Door/driver's side doors (for examp le pow-
er windows)
Seat heating
Sound-amplifier
Power top control module, electro nics
(Cabriolet)
Inter ior lights
Exterior lighting
Driver assistance systems
Airbag
Button illumination, coils for neck heating
r elay and socket relay, interior sound,
back-up light switch, temperature sensor
Function lighting, diagnosis, headlight
range control system, air quality sensor,
automat ic dimming rearview mirror
R ight cornering light/ right LED-headlight
Left cornering light/ left LED-headlight
High-voltage battery
Door/front passenger's side doors (for ex-
ample, power windows)
Sockets
Reversible front passenger's side safety
belt tensioners
Central locking components, windshield
washer system
Headlights, lighting
all wheel drive Rear w indow wiper
241