2015 TOYOTA HILUX lights

962. Instrument cluster
HILUX_OM_OM0K219E_(EE)
Warning lights inform the driver of malfunctions in the indicated vehi-
cle’s systems.
Warning lights
*1Brake system warning
light (→P. 448)*1
(if equipped)
Automatic transmission
fluid temperature
warning light ( →P. 450)
*1Charging system
warning light ( →P. 449)*1
(diesel engine)
Timing belt replacement
warning light ( →P. 450)
*1Low engine oil pressure
warning light ( →P. 449)*1
(diesel engine)
Fuel system warning
light ( →P. 451)
*1Malfunction indicator
lamp ( →P. 449)*1
(if equipped)
DPF system warning
light ( →P. 451)
*1
(if equipped)
SRS warning light
(→ P. 449)Open door warning light
(→ P. 452)
*1
(if equipped)
ABS warning light
(→ P. 450)Low fuel level warning
light ( →P. 452)
*1
(if equipped)
Slip indicator light
(→ P. 450)Driver’s seat belt
reminder light ( →P. 452)
*3
(if equipped)
Cruise control indicator
light ( →P. 450)Front passenger’s seat
belt reminder light
(→ P. 452)
HILUX_OM_OM0K219E_(EE).book Page 96 Wednesday, May 14, 2014 3:06 PM

972. Instrument cluster
2
Instrument cluster
HILUX_OM_OM0K219E_(EE)
*1: These lights turn on when the engine switch is turned to the “ON” positionto indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*2: The light flashes to indicate a malfunction.
*3: The light turns to yellow (except for Russia and Ukraine) or flashes (forRussia and Ukraine) to indicate a malfunction.
(if equipped)
Unengaged “Park”
warning light ( →P. 452)*1
(diesel engine)
Engine oil change
reminder light ( →P. 453)
*1
(diesel engine)
Low engine oil level
warning light ( →P. 453)*2
(4WD models)
Four-wheel drive
indicator light ( →P. 450)
HILUX_OM_OM0K219E_(EE).book Page 97 Wednesday, May 14, 2014 3:06 PM

992. Instrument cluster
2
Instrument cluster
HILUX_OM_OM0K219E_(EE)
*1: These lights turn on when the engine switch is turned to the “ON” positionto indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not come on, or if the lights do not turn off. Have
the vehicle inspected by any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
*2: The light flashes to indicate that the system is operating.
CAUTION
■ If a safety system warning light does not come on
Should a safety system light such as ABS and the SRS warning light not
come on when you start the engine, this could mean that these systems are
not available to help protect you in an accident, which could result in death
or serious injury. Have the vehicle inspected by any authorized Toyota
dealer or repairer, or another duly qualified and equipped professional
immediately if this occurs.
HILUX_OM_OM0K219E_(EE).book Page 99 Wednesday, May 14, 2014 3:06 PM

1022. Instrument cluster
HILUX_OM_OM0K219E_(EE)
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the button will reset the
trip meter.
The brightness of the instrument panel lights can be adjusted by turn-
ing the knob.Darker
Brighter
Changing the display
Instrument panel light control (if equipped)
1
2
HILUX_OM_OM0K219E_(EE).book Page 102 Wednesday, May 14, 2014 3:06 PM

1032. Instrument cluster
2
Instrument cluster
HILUX_OM_OM0K219E_(EE)
■The meters illuminate when
XVehicles with non-optitron type meters
The front position lights are turned on.
XVehicles with optitron type meters
The engine switch is in the “ON” position.
■ The odometer and trip meter display illuminate when
The engine switch is in the “ON” position.
■ The brightness of the instrument panel lights
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully clockwise.
■ When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
NOTICE
■To prevent damage to the engine and its components
● Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
● The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. ( →P. 482)
HILUX_OM_OM0K219E_(EE).book Page 103 Wednesday, May 14, 2014 3:06 PM

1163-2. Opening, closing and locking the doors
HILUX_OM_OM0K219E_(EE)
The following functions can be set or canceled:
■Before setting and canceling the functionsRemove the key from the engine switch and check that the alarm
system is disarmed.
Within 5 seconds, insert and remove the key twice in quick suc-
cession.
Wait for 5 seconds and within the next 5 seconds, push and hold
the lock and unlock buttons simultaneously for 3 seconds or
more. The turn signal lights will flash once indicating operation
success to this point.
Select the function you wish to set and follow the procedures below.
To cancel the operation, insert the key into the engine switch.
The optional functions (vehicles with alarm system)
FunctionOperation
Answerback function (on vehicles
with two batteries, the security horn
does not sound) The answerback function can be
turned on or off. Locking or unlock-
ing is indicated by flashing the turn
signal lights and sounding of the
security horn, or flashing of the turn
signal lights only. The security horn
sounds if any door is not securely
closed.
Automatic locking and unlocking
function
All the doors will lock automatically
at 25 km/h (16 mph) or higher vehi-
cle speed.
When the engine switch is turned to
the “LOCK” position, all the doors
will be unlocked automatically.
(Even if the vehicle is subject to a
strong impact, all the doors will not
be unlocked automatically.)
1
2
3
HILUX_OM_OM0K219E_(EE).book Page 116 Wednesday, May 14, 2014
3:06 PM

1173-2. Opening, closing and locking the doors
3
Operation of each component
HILUX_OM_OM0K219E_(EE)■
Setting and canceling the functions
●
Answerback function
See “Before setting and canceling the functions”. ( →P. 1 1 6 )
Within 5 seconds, push the lock button on the wireless remote
control key once. Within the next 2 seconds, push the unlock
button once. The turn signal lights will flash once.
Within 10 seconds, set the desired condition by pushing the
lock and unlock buttons according to the following table.
*: On vehicles with two batteries, the security horn does not sound.
1
2
3
Optional function conditionOperation
AnswerbackOpen door reminderStep 1Step 2Settings
response
Turn signal
lights flash
Security horn
sounds
*
Push lock
button once
Push unlock
button once
within 2 sec-
onds
Turn signal
lights flash
once
Turn signal
lights flash
and security
horn sounds
*
Push lock
button twiceTurn signal
lights flash
twice
Off
Security horn
does not
soundPush lock
button three
timesTurn signal
lights flash
three times
Cancel the settings
Push lock
button four or
more times
Not applicable
HILUX_OM_OM0K219E_(EE).book Page 117 Wednesday, May 14, 2014 3:06 PM

1183-2. Opening, closing and locking the doors
HILUX_OM_OM0K219E_(EE)
●Automatic locking and unlocking function
See “Before setting and canceling the functions”. ( →P. 1 1 6 )
Within 5 seconds, push the lock button on the wireless remote
control key twice within 2 seconds. Within the next 2 seconds,
push the unlock button once. The turn signal lights will flash
twice.
Within 10 seconds, set the desired condition by pushing the
lock and unlock buttons according to the following table.
1
2
3
Automatic
locking/unlocking functionOperation
Step 1Step 2Settings
response
On Push lock button
once
Push unlock but-
ton once within 2
secondsTurn signal lights
flash once
Off Push lock button
twice Turn signal lights
flash twice
Cancel the
settings Push lock button
three or more
times
Not applicable
HILUX_OM_OM0K219E_(EE).book Page 118 Wednesday, May 14, 2014
3:06 PM