2015 SUZUKI NEXA change time
[x] Cancel search: change timePage 192 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
$ 8 ; ) X Q F W L R Q
64MS193
(1) CD button
$ 8 ;(1)
$ 8 ; F R Q Q H F W L R Q
To listen to auxiliary audio sources (sold
separately) through the unit, follow the
instruction below.
1) Connect the auxiliary audio source to
the AUX/USB socket (separately
attached) with an AUX cable.
2) Press the CD button (1).
Each time the button is pressed, the
mode will change as follows:
& $ 8 7 , 2 1
Page 203 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
5 H J L V W U D W L R Q R I D X G L R G H Y L F H V
NOTE:
• To set up a new audio player, disconnect
the phone from the unit. Connect the
phone after audio player setup is com-
pleted if necessary.
• When failed to establish the connection
within 120 seconds, the connecting
operation will be canceled. Please try
again or refer to the audio player manual
for assistance with the pairing process.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Pairing”,
and press the knob (2) to determine the
selection.
4) Select “CAR AUDIO” from the Blue-
tooth
® menu of the audio player and
establish the pairing.
Refer to the manual of the audio player
in use for further information.
5) Enter the Passkey displayed on the unit
to the audio player.NOTE:
• When selecting “Go Back”, the previous
menu will be displayed.
• When additionally registering audio
devices, operate the same step from 1).
6 H O H F W L Q J W K H % O X H W R R W K
Š D X G L R P R G H
Press the CD button (1).
Each time the button is pressed, the mode
will change as follows: 6 H O H F W L Q J D J U R X S R Q O \ I R U V X S S R U W H G
P R G H O V
Turn the TUNE FOLDER PUSH SOUND
knob (2) to select a group. 6 H O H F W L Q J D W U D F N
• Press the Up button (3) to listen to the
next track.
• Press the Down button (4) twice to listen
to the previous track.
When the Down button (4) is pressed
once, the track currently being played
will start from the beginning again.
) D V W I R U Z D U G L Q J 5 H Z L Q G L Q J D W U D F N
• Hold down the Up button (3) to fast for-
ward the track.
• Hold down the Down button (4) to fast
rewind the track.
NOTE:
Some functions may not be available
depending on Bluetooth
® audio.
' L V S O D \ F K D Q J H
Press the DISP button (5).
Each time the button is pressed, display
will change as follows:
To use Bluetooth
® ready audio devices
with this unit, it is required to register the
devices.
CD
Bluetooth
® audio (if equipped)
AUX (if equipped)
Play time
Track name
Artist name
Album name
Page 205 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
' H O H W L R Q R I D X G L R G H Y L F H L Q I R U P D W L R Q
' H O H W H $ X G L R
Follow the instructions below to delete the
registered information of audio device.
1) Press the Bluetooth
® setup button (6).
The Bluetooth
® setup menu will be dis-
played.
2) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Setup Blue-
tooth”, and press the knob (2) to deter-
mine the selection.
3) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “List Audio”,
and press the knob (2) to determine the
selection.
4) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select an audio
device to be deleted, and press the
knob (2) to determine the selection.
5) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Delete”, and
press the knob (2) to determine the
selection.
6) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Delete?”,
and press the knob (2) to determine the
selection.
7) Turn the TUNE FOLDER PUSH
SOUND knob (2) to select “Confirm”,
and press the knob (2) to complete the
deletion.
NOTE:
When selecting “Go Back”, the previous
menu will be displayed.
' L V F O D L P H U I R U % O X H W R R W K
Š I X Q F W L R Q
• Depending on the mobile phone models,
some phones may not be compatible
fully or partially (some function may be
restricted).
• Connectivity or voice quality may get
affected depending on circumstances.
• After the ignition switch is turned to the
“ON” position, the audio system takes
few seconds to detect and connect to
the Bluetooth
® device (if already paired)
• Make sure that you are aware of all
applicable lock laws and accordingly use
Bluetooth
Š device.
5 H P R W H $ X G L R & R Q W U R O V
L I H T X L S S H G Controlling of basic functions of the audio
system is available using the switches on
the steering wheel. $ G M X V W L Q J W K H Y R O X P H
• To increase the volume, hold down “+” of
the VOL switch (1). The volume will keep
on being increased until the switch is
released.
• To decrease the volume, hold down “-” of
the VOL switch (1). The volume will keep
on being decreased until the switch is
released.
• To mute the sound, press the switch (2). 6 H O H F W L Q J W K H P R G HPress the switch (3).
Each time the button is pressed, the mode
will change as follows:
(2)
(3)
(1)
(4)
Page 208 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
The anti-theft function is intended to dis-
courage thefts, such as that the audio sys-
tem becomes inoperable when it is installed
on other vehicles.
This function works by entering a Personal
Identification Number (PIN).
When the unit is disconnected from its
power source, such as when the audio sys-
tem is removed or the battery is discon-
nected, the unit will become inoperable until
the PIN is reentered. 6 H W W L Q J W K H $ Q W L 7 K H I W ) X Q F W L R Q1) Press the VOL PUSH POWER knob (1)
to power off.
2) Hold down the buttons numbered [1]
and [6] of the Preset buttons (2) and
press the VOL PUSH POWER knob (1).
“SECURITY” will be displayed.
3) Press the Up button (3) and the button
numbered [1] of the Preset buttons (2)
simultaneously.
4) Enter a 4-digit number to be registered
as PIN using the buttons numbered [1] -
[4] of the Preset buttons (2).
5) Hold down the TUNE FOLDER PUSH
SOUND knob (4) for 1 second or longer
to set the anti-theft function.NOTE:
Take a note of the registered PIN and keep
it for the future use. & D Q F H O L Q J W K H D Q W L W K H I W I H D W X U H
To cancel the anti-theft function, delete the
registered PIN.
1) Press the VOL PUSH POWER knob
(1) to power off.
2) Hold down the buttons numbered [1]
and [6] of the Preset buttons (2) and
press the VOL PUSH POWER knob
(1).
“PIN ENTRY” will be displayed.
3) Press the Up button (3) and the button
numbered [1] of the Preset buttons (2)
simultaneously.
4) Enter a 4-digit number to be registered
as PIN using the buttons numbered [1] -
[4] of the Preset buttons (2).
5) Hold down the TUNE FOLDER PUSH
SOUND knob (4) for 1 second or lon-
ger to delete the registered PIN. The
indication “----” will be displayed and
the anti-theft function will be canceled.
NOTE:
To change your PIN, first delete your cur-
rent PIN, then set a new one. & R Q I L U P L Q J W K H 3 H U V R Q D O , G H Q W L I L F D W L R Q
1 X P E H U 3 , 1
When the main power source is discon-
nected such as when the battery is
replaced, etc, it is required to enter the PIN
to make the unit operable again.
1) Set the ignition switch to the “ACC”
position.
“SECURITY” will be displayed.
2) Press the Up button (3) and the button
numbered [1] of the Preset buttons (2)
simultaneously.
3) Enter a 4-digit number to be registered
as PIN using the buttons numbered [1] -
[4] of the Preset buttons (2).
4) Hold down TUNE FOLDER PUSH
SOUND knob (4) for 1 second or lon-
ger.
When the PIN same as registered is
entered, the power of the audio system
will be turned off automatically and it
will become operable again.
NOTE:
If an incorrect PIN is entered, “ERROR”
and the total number of incorrect entry
attempts will be displayed.
If an incorrect PIN is entered 10 times or
more, “HELP” will be displayed and the
audio system will become inoperable.
Page 218 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
0 3 : 0 $ $ $ &
No playbackThe disc contains unsupported formatted
data.Check the file format.
Sound skips or noise producedSound skipping may occur when playing
VBR (Variable Bit Rate) files.It is not recommended to play VBR files.
8 6 %
Playback does not start when the USB
device is connected.There is no supported format file to play
on this unit.Check the file format.
The current consumption of the USB
device exceeds 1.0 A.Use an USB device with a current con-
sumption lower than 1.0 A.
% O X H W R R W K
Š
Pairing failedThe distance between this unit and the
Bluetooth
® ready device is too far, or a
metallic object may be located between
the Bluetooth® ready device and this unit.Change the location of the Bluetooth
®
ready device.
The Bluetooth
® function of the Blue-
tooth
® ready device is off.Refer to the manual of the Bluetooth
®
ready device. (Some devices have the
power saving function that automatically
activates after a certain time.)
Unable to receive a call.Your current location may be out of ser-
vice area.Drive your vehicle to the service area of
the phone.
The voice quality of hands-free is low
(Distortion, noise etc.).Another wireless device may be located
near the unit.Switch off the wireless device or keep it
away from the unit.
3 U R E O H P
3 R V V L E O H F D X V H
3 R V V L E O H V R O X W L R Q
Page 236 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
& O X W F K 3 H G D O ) O X L G & R Q W U R O & O X W F K
64MS141
Check the clutch pedal for smooth opera-
tion and clutch fluid level from time to time.
If clutch dragging is felt with the pedal fully
depressed, have the clutch inspected by
D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S. If the
clutch fluid level is near the “MIN” triangle
mark, fill it up to the “MAX” triangle mark
with MARUTI genuine brake fluid.
) X H O ) L O W H U
64MS175
The fuel filter works as a water sedimentor
as well.
Drain water according to the Periodic
Maintenance Schedule. To drain water:
1) Place a pan or ample rag under the fuel
filter drain nozzle.
2) Loosen the drain screw (1). The water
will be drained.
3) Tighten the drain screw when the water
changes to the diesel fuel.
7 L J K W H Q L Q J W R U T X H I R U G U D L Q V F U H Z
1 P N J P O E I W
% U D N H V % U D N H ) O X L G
64MS141
Check the brake fluid level by looking at
the reservoir in the engine compartment.
Check that the fluid level is between the
“MAX” and “MIN” triangle mark. If the
brake fluid level is near the “MIN” triangle
mark, fill it up to the “MAX” triangle mark
with MARUTI GENUINE BRAKE FLUID.
MAX
MIN
(1)
( ; $ 0 3 / (
MAX
MIN