2015 SUZUKI NEXA oil filter
[x] Cancel search: oil filterPage 164 of 288
Downloaded from www.Manualslib.com manuals search engine 2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
• adjust the temperature selector to the
HOT end,
• push in the air conditioning switch (5) to
turn on the air conditioning system, and
• adjust the side outlets so the air blows
on the side windows. 0 D L Q W H Q D Q F HIf you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine idling.
This circulates the refrigerant and oil and
helps protect the internal components.If your air conditioner is equipped with air
filters, clean or replace them as specified
in the “Maintenance Schedule” in the
“ , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
Page 169 of 288
Downloaded from www.Manualslib.com manuals search engine
2 7 + ( 5 & 2 1 7 5 2 / 6 $ 1 ' ( 4 8 , 3 0 ( 1 7
0 6 (
• To return the blower speed selector (2),
air intake selector (3), and “MODE”
switch (4) to automatic operation, push
the “AUTO” switch (8).
64MS149
Be careful not to cover the interior tem-
perature sensor (10) located between the
steering wheel and the climate control
panel, or the solar sensor (11) located at
the top of the central part of the dash-
board. These sensors are used by the
automatic system to regulate temperature.
0 D Q X D O R S H U D W L R Q
You can manually control the climate con-
trol system. Set the selectors to the
desired positions.
64MS091
NOTE:
If you need maximum defrosting:
• push the defrost switch (5) to turn on the
defroster (the air conditioning system will
come on and the fresh air position (b)
will be selected automatically),
• set the blower speed selector to HIGH,
• adjust the temperature selector to the
“HI” indication on the display, and
• adjust the side outlets so the air blows
on the side windows.
0 D L Q W H Q D Q F HIf you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine
idling. This circulates the refrigerant and oil
and helps protect the internal components.
If your air conditioner is equipped with air
filters, clean or replace them as specified
in the “Maintenance Schedule” in the
Page 226 of 288
Downloaded from www.Manualslib.com manuals search engine 7-3INSPECTION AND MAINTENANCE
64MS0-74E
Interval: This interval should be judged by odometer reading
or months, whichever comes first.
FREE INSPECTION
PERIODIC MAINTENANCE AT COST
km (x1000)
1
5
10
20
30
40
50
60
70
80
months
1
6
12
24
36
48
60
72
84
96
Engine
1-1
l
l
l
R
l
R
l
R
l
R
1-2- - RRRRRRRR
1-3
l
l
l
l
l
l
l
l
l
l
1-
) ) ) ) ) ) ) ) ) )
1-
Engine Coolant (Level, Leakage)
Engine oil and engine oil
F I L T E R
Cooling system hoses and connections (Leakage and Damage)
Engine Mounting and -anifold &ixing . O I S E , E A K A G E $ A M A G E E T C
Exhaust System (Noise, Leakage etc.
-l-l-I-I-l
1- Exhaust Gas Recirculation Valve
D13A engine ----C--C--
FUEL
2-1.
Air cleaner filter element
Paved-road
Clean after 5,000 KM. Replace after every 40,000 KM.
Dusty Condition
Clean after 2,500 KM or as required. Replace after every 40,000 KM.
Replace more frequently if dust condition is severe.
2-2.
Fuel tank cap, fuel lines and connections (Leakage and Damage)
-
l
-
-
-
l
-
-
-
l
2-3.
Fuel Filter and Water Draining
I
l
I
R
I
R
I
R
I
R
CLUTCH AND TRANSMISSION
3-1.
Clutch fluid (level, leakage)
l
l
l
R
l
R
l
R
l
R
3-2.Clutch slipping (Dragging or Excess Damage) llllllllll
3-3.
Manual Transmission/Transfer or Differential Oil (Level, Leakage)
Replace at 1,60,000 km or 10 years whichever comes first
I
I
I
I
I
I
I
I
I
I
DRIVE SHAFT
4-1.
Drive shaft boot (boot damage)
-
l
l
l
l
l
l
l
l
l
BRAKE
5-1.
Brake Fluid (Level, Leakage)
I
I
I
R
I
R
I
R
I
R
5-2. Brake pedal (pedal - wall clearance) I I I I I I I I I I
5-3.
Parking brake lever and cable (Play, damage)
I
I
I
I
I
I
I
I
I
I
5-4.Brake disc and pad (Wear) – I I I I I I I I I
Page 231 of 288
Downloaded from www.Manualslib.com manuals search engine
, 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
& K D Q J L Q J ( Q J L Q H 2 L O D Q G ) L O W H UDrain the engine oil while the engine is still
warm.
64MS151
(1) Engine oil filler cap (D13A engine)
(2) Engine oil filler cap (D16AA engine)
1) Remove the oil filler cap.
2) Place a drain pan under the drain plug.
3) Using a wrench, remove the drain plug
and drain out the engine oil.
60G306
7 L J K W H Q L Q J W R U T X H I R U G U D L Q S O X J
1 P N J P O E I W
4) Reinstall the drain plug
Z L W K Q H Z
gasket.
Tighten the plug with a
wrench to the
specified torque.
5 H S O D F H W K H 2 L O ) L O W H U ) R U ' $ ' L H V H O ( Q J L Q H 0 R G H O
NOTE:
Since special procedures and tools are
required, it is recommended that you trust
this job to your D X W K R U L V H G 0 D U X W L
6 X ] X N L Z R U N V K R S.
1) Using a socket or a ring spanner
remove oil filter housing cover (3).
61M7001
(1) Loosen
(2) Tighten
2) Remove the old oil filter element and
replace it with a new oil filter element.
3) Clean the surface of oil filter cap and
replace the O-ring.4)
Tighten the oil filter housing cover on
the oil filter housing using a socket or
ring spanner to the specified torque.
& $ 8 7 , 2 1
7 K H H Q J L Q H R L O W H P S H U D W X U H P D \ E H
K L J K H Q R X J K W R E X U Q \ R X U I L Q J H U V
Z K H Q W K H G U D L Q S O X J L V O R R V H Q H G : D L W
X Q W L O W K H G U D L Q S O X J L V F R R O H Q R X J K W R
W R X F K Z L W K \ R X U E D U H K D Q G V
(2)
(1)
Open
Close
( ; $ 0 3 / (
: $ 5 1 , 1 *
1 H Z D Q G X V H G R L O F D Q E H K D ] D U G R X V
& K L O G U H Q D Q G S H W V P D \ E H K D U P H G E \
V Z D O O R Z L Q J Q H Z R U X V H G R L O . H H S Q H Z
D Q G X V H G R L O D Q G X V H G R L O I L O W H U V D Z D \
I U R P F K L O G U H Q D Q G S H W V
5 H S H D W H G S U R O R Q J H G F R Q W D F W Z L W K
X V H G H Q J L Q H R L O P D \ F D X V H V N L Q F D Q
F H U
% U L H I F R Q W D F W Z L W K X V H G R L O P D \ L U U L W D W H
V N L Q
7 R P L Q L P L ] H \ R X U H [ S R V X U H W R X V H G
R L O Z H D U D O R Q J V O H H Y H V K L U W D Q G P R L V
W X U H S U R R I J O R Y H V V X F K D V G L V K Z D V K
L Q J J O R Y H V Z K H Q F K D Q J L Q J R L O , I R L O
F R Q W D F W V \ R X U V N L Q Z D V K W K R U R X J K O \
Z L W K V R D S D Q G Z D W H U
/ D X Q G H U D Q \ F O R W K L Q J R U U D J V L I Z H W
Z L W K R L O
5 H F \ F O H R U S U R S H U O \ G L V S R V H R I X V H G
R L O D Q G R L O I L O W H U
(1)
(2)
(3)
( ; $ 0 3 / (
Page 232 of 288
Downloaded from www.Manualslib.com manuals search engine , 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
7 L J K W H Q L Q J W R U T X H I R U R L O I L O W H U
' $ ' L H V H O H Q J L Q H
1 P N J P O E I W
5 H I L O O Z L W K 2 L O D Q G & K H F N I R U / H D N V1) Pour oil through the filler hole and
install the filler cap.
For the approximate capacity of the oil,
refer to the “Capacities” item in the
“SPECIFICATIONS” section.
2) Start the engine and look carefully for
leaks at the oil filter and drain plug. Run
the engine at various speeds for at least
5 minutes.
3) Stop the engine and wait about 5 min-
utes. Check the oil level again and add
oil if necessary. Check for leaks again.
) R U ' $ $ ' L H V H O ( Q J L Q H 0 R G H OSince spec
ial procedures and tools are
requ
ired,
it is recommended that you trust
this job to your
A U T H O R I S E D - A R U T I
3 U Z U K I W O R K S H O P
( Q J L Q H & R R O D Q W 6 H O H F W L R Q R I & R R O D Q WTo m a
inta
in opt
imum performance and
durab
ility of your eng
ine, use MARUTI
Genu
ine Coolant or equ
ivalent
.
Th
is type of coolant
is best for your cool
ing
system as
it:
• Helps mainta
in proper eng
ine tempera-
ture
.
•G
ives proper protect
ion aga
inst freez
ing
and bo
iling.
•G
ives proper protect
ion aga
inst corro-
s
ion and rust
.
Failure to use the proper coolant can dam-
age your cooling system. Your D X W K R U L V H G
0 D U X W L 6 X ] X N L Z R U N V K R S can help you
select the proper coolant.
NOTICE
7 R S U H Y H Q W R L O O H D N D J H P D N H V X U H
W K D W W K H R L O I L O W H U L V W L J K W E X W G R Q R W
R Y H U W L J K W H Q L W
NOTICE
Page 261 of 288
Downloaded from www.Manualslib.com manuals search engine
, 1 6 3 ( & 7 , 2 1 $ 1 ' 0 $ , 1 7 ( 1 $ 1 & (
0 6 (
$ L U & R Q G L W L R Q L Q J 6 \ V W H PIf you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engine
idling. This circulates the refrigerant and oil
and helps protect the internal components. 5 H S O D F H P H Q W R I W K H $ L U & R Q G L W L R Q H U
) L O W H U L I H T X L S S H G Since special procedures are required, we
recommend you take your vehicle to your
D X W K R U L V H G 0 D U X W L 6 X ] X N L Z R U N V K R S for the
air conditioner filter replacement.
1) To access the air conditioner filter,
remove the glove box. Refer to the pro-
cedure for the bulb replacement of the
“Glove Box Light” in this section.
79MH0761
2) Remove the cover (1) and pull out the
air conditioner filter (2).
NOTE:
When you install a new filter, make sure
the UP mark (3) faces upward.
(1)
(2)
(3)
Page 286 of 288
Downloaded from www.Manualslib.com manuals search engine 6 3 ( & , ) , & $ 7 , 2 1 6
0 6 (
*1 When tire replacement is necessary and if the specified load index and speed rated tire is not available, then use a tire of higher load
index and speed rating.
*2: The spare wheel provided with alloy wheel variant is steel wheel rim, hence follow 4 tire rotation only.
(Refer: Section
“Inspection and maintenance”)
, 7 ( 0 : K H H O V D Q G 7 L U H V
Tire size, front and rear
205/60R16 92H
*1*2
Tire size, spare
205/60R16 92H
*2 (Steel wheel)
Rim size 205/60R16 tire: 16X6J
Tire pressures For the specified tire pressure, see the Tire Information Label located
on the driver’s door lock pillar.
, 7 ( 0 5 H F R P P H Q G H G ) X H O / X E U L F D Q W V D Q G & D S D F L W L H V D S S U R [
Fuel 48 L
Engine oil D13A 3.2 L (replacement with oil filter)
D16AA 5.25 L (replacement with oil filter)
Engine coolant D13A 6.0 L (including reservoir tank)
D16AA 5.5 L (including reservoir tank)
Manual transaxle oil 5M/T 2.6 L
6M/T 2.1 L
Brake fluid / Clutch fluid Refill to the proper oil level according to the instructions in the “INSPEC-
TION AND MAINTENANCE” section.