Audio mode
TP (Traffic Program) function Intr oduction The TP function is an RDS radio data service.
Whil
e tr
affic news monitoring is on (display:
TP ), traffic announcements will interrupt the
current Audio mode.
On the AM frequency band, traffic news mon-
itoring is not possible.
Additional information and warnings: ● Safety notes ››
›
page 4
● Unit overview ›››
page 6
● Basic information on use ›››
page 8
● Radio mode ›››
page 10
Monitoring traffic news stations using
the TP fu
nction Fig. 14
TP function active. Traffic news monitoring with the TP function
i
s
on
ly possible if the TP station is available.
Some stations that do not have their own
traffic news support the TP function by broad-
casting traffic reports from other stations
(EON). Traffic announcements broadcast by
the linked traffic news stations interrupt the
current audio mode.
Switching the TP function on and off
● Press the unit button TP
› ››
Fig. 1 7 .
If the s
t
ation that is currently selected in FM
mode does not support the TP function, the
unit will automatically search for a TP station
(display: TP SEEK ).
● Press the TP unit button to switch the TP
f u
nction off
again.
When in areas without TP coverage the TP
function is activated, and search is begun for
a traffic news station, ending in the failure to
find a station. The search then returns to the
station to which it was originally tuned. The
TP function remains switched on (display: No
TP ). It is necessary to deactivate the TP func-
tion, otherwise no stations will be found in
the subsequent search using the arrow but-
tons.
TP function activated
While traffic news monitoring is switched on
and enabled, TP is displayed ››› Fig. 14. In radio mode, the selected station must sup-
port
the TP function. If a station selected via
the station buttons or manual tuning does
not support the TP function, traffic news
monitoring is not possible (display: NO TP).
If the currently selected traffic news station
can no longer be received, NO TP is also dis-
played and you will need to start a manual
station search using the arrow buttons ›››
Fig. 1 10 and
› ››
p
age 10.
D
uring a station search with the arrow but-
tons or the scan function (SCN), the unit will
only tune to stations that support the TP
function.
In Media mode or while the unit is muted, the
unit will automatically tune to a traffic news
station in the background, provided the TP
station available has a good signal. This op-
eration may take some time depending on
the situation.
Incoming traffic announcement (INFO)
An incoming traffic announcement (display: INFO ) will interrupt the active audio mode.
● If required, the radio is switched to the traf-
fic news
station (EON) for the duration of the
traffic announcement.
● The Media mode will be paused and the
volume w
ill be adjusted to the preset level.
● During the announcement, the announce-
ment v
olume can be adjusted with the
16
