2015 Peugeot RCZ fuel type

35
RCZ_en_Chap01_controle-de-marche_ed01-2015
"SETUP" MENU
F Press the "SETUP" button to gain access to the configuration menu:
- "Display configuration",
-

"V
oice synthesis",
-

"Choice of language",
-


"V
ehicle parameters",
-

"Alert log".
As

a safety measure, configuration of the multifunction screen by
the driver must only be done when stationary

.
display configuration
This menu allows you to choose a colour scheme for the screen, to
adjust the brightness, set the date and time and choose the units for
distance (km or miles), fuel consumption (l/100 km, mpg or km/l) and\

temperature (°Centigrade or °Fahrenheit).
Voice synthesis
This men allows you to adjust the volume for navigation instructions and\

to choose the type of voice (male or female).
* Depending on version.
** According to country of sale.
Choice of language
This menu allows you to choose the language used by the screen
(French, English, Italian, Portuguese, Spanish, German, Dutch, Turkish,
Polish, Russian).
Vehicle parameters*
This menu allows you to activate or deactivate certain driving and
comfort equipment, arranged by category:
-

Access to the vehicle
●

Plip action (selective unlocking of the driver's door; refer to the
"Access" section),
-


Parking sensors
-

Lighting configuration (see the "Visibility" section) :
● Duration
of the guide-me-home lighting,
● Directional
headlamps (main/additional directional lighting),
● Mood
lighting (Interior mood lighting),
● Daytime
running lamps**.
Alert log
It lists the active alerts by displaying their associated messages in tu\
rn.
Setting the date and time
F
Press "
SETUP".
F Select

"Display

configuration"

and

confirm.
F Select

"Set

date

and

time"

and

confirm.
You can select "Synchronise the minutes with GPS ", so that the
minutes are adjusted automatically by satellite reception. F Select
the setting to modify. Confirm by pressing "
OK", then adjust
the setting and modify again.
F
Adjust the settings one by one.
F

Select "
OK" in the screen then confirm to save the setting.
1/
MONITORING

139
RCZ_en_Chap07_verifications_ed01-2015
FUEL TANK
Fuel tank capacity: approximately 55 litres.
LOW FUEL LEVEL
R

EFUELLING
When the fuel tank minimum level is reached this warning
lamp comes on on the instrument panel, accompanied by an
audible signal and an alert message. When it first comes on
there remains approximately 5 litres

of fuel in the tank.
Until

sufficient fuel is added, this warning lamp appears every time
the ignition is switched on, accompanied by an audible signal and a
message. When driving, this audible signal and display of the alert
message

are repeated with increasing frequency as the fuel level drops
towards

"0".
Refuel as soon as possible to avoid running out of fuel.
If you run out of fuel (Diesel), refer also to the "Running out of fue\
l
(Diesel)" section.
A


label

affixed to the inside of the flap reminds you of the type of fuel to
be used depending on your engine.
Additions of fuel must be of at least 5 litres, in order to be registere\
d by
the fuel gauge. T

o fill the tank in complete safety:
F the engine must be switched off,
F
press the rear part of the flap, then raise it to open it,
F

turn the cap to the left,
F


remove the cap and hook it onto the clip located on the inside of the
flap,
F

fill the tank, but do not continue after the 3rd cut-off of the
pump; this could cause malfunctions.
Opening
the filler cap may create a noise a caused by an inrush
of air

. This vacuum is entirely normal, resulting from the sealing of
the fuel system.
7/
CHECKS

140
RCZ_en_Chap07_verifications_ed01-2015
FUEL USE d FOR PETROL ENGINES
The petrol engines are compatible with E10 bio-petrol (containing
10 % ethanol), conforming to European standards EN 228 and EN 15376.
E85 type fuels (containing up to 85 % ethanol) are reserved exclusivel\
y for
vehicles marketed for the use of this type of fuel (BioFlex vehicles).\
The
quality
of the ethanol must comply with European standard EN 15293.
FUEL USE d FOR dIESEL ENGINES
The Diesel engines are compatible with biofuels which conform to
current and future European standards (Diesel fuel which complies
with
standard EN 590 mixed with a biofuel which complies with
standard
EN 14214) available at the pumps (containing up to 7 % Fatty
Acid Methyl Ester).
B30 biofuel can be used in certain Diesel engines. However, this use,
even
occasional, requires strict application of the special servicing
conditions.

Contact a PEUGEOT

dealer or a qualified workshop.
The use of any other type of (bio)fuel (vegetable or animal oils, pur\
e
or diluted, domestic fuel...) is strictly prohibited (risk of damage t\
o the
engine and fuel system).
When

you

have

filled

the

tank:
F

put the cap back in place,
F

turn it to the right,
F
close

the

flap.
Freezing conditions
In these conditions, the filler flap may be jammed.
Opening the boot gives access to the flap, allowing it to be
released by hand.

192
RCZ_en_Chap09_caracteristiques_ed01-2015
Engine1.6 THP
150 hp 1.6 THP 155 hp 1.6 THP
160 hp 1.6 THP
200 hp 1.6 THP
270 hp
Gearbox Automatic
(6-speed) Manual
(6-speed) Automatic
(6-speed) Automatic
(6-speed) Manual
(6-speed) Manual
(6-speed)
Model code:
4
j ... 5FE-
j
5FV
-85FV-A
5FV-A/GT** 5FM-
j
5FM-

j /GT**5FU-8
5FU-M
5FU-8/GT**
5FU-M/GT** 5FG-M
Cubic capacity (cc) 1 5981 5981 598 1 598 1 598
Bore x stroke (mm) 77 x 85.877 x 85.877 x 85.8 77 x 85.8 77 x 85.8
Max power: EU standard (kW)* 11 011 5120147199
Max power engine speed (rpm) 6 0506 0006 000 5 500 6 000
Max
torque: EU standard (Nm) 240240240275330
Max
torque engine speed (rpm)1 400 1 4001 400 1 700 1 900
Fuel UnleadedUnleadedUnleaded Unleaded Unleaded
Catalytic converter Ye sYe sYe sYe sYe s
Engine oil capacity (in litres)
(with
filter replacement) 4.25
4.254.254.25 -
PETROL ENGINES AND GEARBO x ES
* The maximum power quoted is the type approved value obtained on a test bed, under the conditions defined in European legislation
(directive 1999/99/CE).
**
GT Line version.

195
RCZ_en_Chap09_caracteristiques_ed01-2015
Engine2.0 H d i 160 hp
Gearbox Manual
(6-speed)
Model code:
4
j ... RHH-8
Cubic capacity (cc) 1 997
Bore x stroke (mm) 85 x 88
Max power: EU standard (kW)* 120
Max power engine speed (rpm) 3 750
Max
torque: EU standard (Nm) 340
Max
torque engine speed (rpm) 2 000
Fuel Diesel
Catalytic converter Ye s
Particle
filter Ye s
Engine oil capacity (in litres)
(with
filter replacement) 5.25
DIESEL
ENGINE AND GEARBO x
* The maximum power quoted is the type approved value obtained on a test bed, under the conditions defined in European legislation
(directive 1999/99/CE).
9/
TECHNICAL DATA

199
RCZ_en_Chap09_caracteristiques_ed01-2015
IDENTIFICATION MARKINGS
Various visible markings for the identification of your vehicle.
A.
V
ehicle identification number (VIN) under the bonnet.
This number is engraved on the bodywork near the damper
support.
For access to it, raise the plastic cover

.C.

Manufacturer's label.

This self-destructing label affixed to the right hand middle door pillar carries the following information:
-
the manufacturer's name,
-


the European
Type Approval number,
- the
vehicle identification number (VIN),
-

the gross vehicle weight (GVW),
-


the gross train weight (GTW),
-


the maximum front axle weight,
-


the maximum rear axle weight.
The tyre pressures must be checked when the tyres are cold, at
least once a month.
Low tyre pressures increase fuel consumption.
B.


V
ehicle identification number (VIN) at the bottom of the
windscreen.


This number is indicated on a self-adhesive label which is visible
through the windscreen.
d

.
T
yre/paint label.
This
label, affixed to the door aperture, driver's side, carries the
following information:
-

the tyre inflation pressures, laden and unladen,
-

the tyre sizes (including the load index and speed rating),
-

the inflation pressure of the spare wheel,
-

the paint colour code.
9/
TECHNICAL DATA