2015 Peugeot RCZ buttons

130
RCZ_en_Chap06_conduite_ed01-2015
dISPLAYS IN THE INSTRUMENT PANEL
The programmed information is grouped together in the instrument
panel screen.
5.
Speed limiter on / of
f indication.
6.

Speed limiter mode selection indication.
7.


Programmed speed value.
PROGRAMMING
F Turn dial 1 to the "LIMIT" position: the speed limiter mode is selected but is not switched on
(OFF / Pause).
You do not have to switch the speed limiter on in order
to set the speed.
F

Set the speed value by pressing button 2

or 3
(e.g.: 55 mph (90 km/h)).
You can then change the programmed speed using
buttons 2 and 3:
-

by + or - 1 mph (km/h) = short press,
-


by + or - 5 mph (km/h) = long press,
-


in steps of + or - 5 mph (km/h) = maintained press.
F


Switch the speed limiter on by pressing button 4

.
F

Switch the speed limiter off by pressing button 4 : the display
confirms that it has been switched off (OFF / Pause).
F Switch the speed limiter back on by pressing
button 4 again.

133
RCZ_en_Chap06_conduite_ed01-2015
dISPLAYS IN THE INSTRUMENT PANEL
The programmed information is grouped together in the instrument
panel screen.
5.
Cruise control of
f / resume indication.
6.

Cruise control mode selection indication.
7.


Programmed speed setting.
PROGRAMMING
F Turn dial 1 to the "CRUISE" position: the cruise control mode is selected but is not switched on
(OFF / Pause).
F

Set the programmed speed by accelerating to
the

required speed, then press button
2
or 3
(e.g.:
70 mph (110 km/h)).
You can then change the programmed speed using
buttons 2 and 3:
-

by + or - 1 mph (km/h) = short press,
-


by + or - 5 mph (km/h) = long press,
-


in steps of + or - 5 mph (km/h) = maintained press.
F


Switch of
f the cruise control by pressing button 4:
the
display confirms that it has been switched off
(OFF / Pause).
F


Switch the cruise control back on by pressing
button

4 again.
6/
DRIVING

134
RCZ_en_Chap06_conduite_ed01-2015
EXCEEdING THE PROGRAMMEd SPEEd
Intentional or unintentional exceeding of the
programmed speed results in flashing of this speed in
the screen.
Return to the programmed speed, by means of
intentional or unintentional deceleration of the vehicle, automatically \
cancels

the flashing of the speed.
EXITING CRUISE CONTROL MO d E
F Turn dial 1 to the "0" position: the cruise control mode is
deselected. It disappears from the display.
OPERATING F AULT
In the event of a cruise control malfunction, the speed is cleared
resulting
in flashing of the dashes.
Have
it checked by a PEUGEOT

dealer or a qualified workshop.
When the cruise control is switched on, be careful if you maintain
the pressure on one of the programmed speed changing buttons:
this may result in a very rapid change in the speed of your vehicle.
Do
not use the cruise control on slippery roads or in heavy traffic.
On a steep descent, the cruise control will not be able to prevent
the vehicle from exceeding the programmed speed.
To avoid any risk of jamming of the pedals:
-

ensure that the mat is positioned correctly
,
- never
fit one mat on top of another.

02
206
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RADIO: select the previous/next preset
station.
Select the next entry in the address book.SRC/TEL button:
change the audio source,
start a call from the address book,
call/end call on the telephone,
press for more than 2 seconds: access
to the address book.
RADIO: change to the previous radio
station in the list.
Long press: automatic search for a
lower frequency.
CD: select the previous track.
CD: continuous press: fast reverse.
RADIO: change to the next radio station in the list.
Long
press: automatic search for a higher frequency.
CD: select the next track.
CD: continuous press: fast forward play.
Volume increase.
Volume decrease.Mute: press the volume
increase and decrease
buttons simultaneously.
Restore the sound by
pressing one of the
two volume buttons.
STEERING MOUNTEd CONTROLS

07
237
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Press the button on the numerical keypad to recall a
preset station.
Or press then turn the thumb wheel at the steering
mounted controls.
Presetting a station
After selecting a station, press one of the buttons on the
numerical keypad for 2 seconds to preset the current
station.
An audible signal confirms that the station has been preset.
Press RAdIO.
Activate / deactivate R d S
RDS, if activated, allows you to continue listening to the same
station
by automatic retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS station may not be
assured throughout the entire country as radio stations do not
cover 100 % of the territory

. This explains the loss of reception of
the station during a journey.
Select "Guidance options " then
confirm.
Activate or deactivate "R
d S" then
confirm.
RAdIO

07
238
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RAdIO
Display of options:
if active but not available, the display
will be greyed out,
if active and available, the display will
be empty.Display the name and number of
the multiplex service being used. Preset stations, buttons 1 to 6.
Short press: select the preset radio
station.
Long press: preset a radio station.
Display of "Radiotext" for the
current station.
Display of the "DAB" or "DAB
(FM)" band.
Display of the name of
the current station.
Represents the signal strength
for the band being listened to.
If the "DAB" radio station being
listened to is not available on
"FM", the "DAB FM" option is
greyed out. Any thumbnail broadcast by the
station.
The "Video mode" allows the
display to be enlarged.

08
244
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's speakers.
Connect the telephone: refer to the "USING THE TELEPHONE"
section.
Select "
Audio" or "All" profile.
If play does not start automatically, it may be necessary to start the
audio playback from the telephone.
Control is from the peripheral device or by using the audio system
buttons.
Once connected in streaming mode, the telephone is considered to be
a media source.
It is recommended that you activate "Repeat" on the Bluetooth
peripheral.
MUSIC MEdIA PLAYERS
Connecting APPLE® players
Connect the Apple® player to the USB port using a suitable cable
(not

supplied).
Play starts automatically.
Control is via the audio system.
The

classifications

available are those of the portable device
connected (artists / albums / genres / playlists / audiobooks /
podcasts).
The


default

classification used is by artist.
T
o modify the classification
used,


return

to

the

first level of the menu then select the desired
classification


(playlists for example) and confirm to go down through
the menu to the desired track.
The


"Shuffle

tracks" mode on an iPod
® corresponds to the "Random"
mode on the audio system.
The

"Shuffle

albums"

mode

on

an

iPod
® corresponds to the "Random
all" on the audio system.
"Shuffle

tracks"

is

restored

by

default

on each connection.
The version of software in the audio system may not be compatible
with the generation of your Apple
® player.

01
260
RCZ_en_Chap10c_RD45_ed01_2015
FIRST STEPS
Eject CD.Select source:
radio, audio CD / MP3 CD, USB,
j

ack connection, Streaming,
AU x .
Select the screen display
mode:
Date, audio functions, trip
computer, telephone. Automatic
frequency search
down/up.
Select previous/next CD, MP3
or USB track.
Audio settings: front/
rear fader

, left/right
balance, bass/treble,
loudness, audio
ambiences. Display the list of
local stations.
Long press: CD
tracks or MP3
folders (CD / USB).
TA

(Traffic
Announcements)

on/of

f.
Long press: PTY* (radio
Programme TYpe) mode.
Display main menu.
The DARK button changes the screen display
for improved driving comfort at night.
1
st press: upper bar only illuminated.
2nd press: black screen.
3rd press: return to standard display.
On/off, volume setting.
Buttons 1 to 6:
Select a pre-set radio station.
Long press: pre-set a station. Select next frequency down/up.
Select previous/next MP3 folder.
Select previous/next folder / genre /
artist / playlist (USB). Confirm.
Selection of FM / DAB /
AM* wavebands.
* Depending on model.
Abandon the current
operation.
*
Available according to version.