2015 Peugeot 208 width

121
208_en_Chap05_conduite_ed01-2015
Reversing camera
The reversing camera function may be
completed with parking sensors.The reversing camera cannot in any
circumstances be a substitute for
vigilance on the part of the driver.
The superimposed representation of guide
lines helps with the manoeuvre.
They are represented by lines marked "on
the ground" and do not allow the position of
the vehicle to be determined relative to tall
obstacles (for example: other vehicles, ...).
Some deformation of the image is normal.
High pressure jet washing
When washing your vehicle, do not
direct the lance within 30 cm of the
camera lens.
The reversing camera is activated automatically
when reverse gear is engaged.
The image is displayed in the touch screen.
The blue lines represent the general direction
of the vehicle (the difference corresponds to
the width of your vehicle without the mirrors).
The red lines represent a distance of about
30 cm beyond the edge of your vehicle's rear
b u m p e r.
The green lines represent distances of about
1 and 2 metres beyond the edge of your
vehicle's rear bumper.
The turquoise blue curves represent the
maximum turning circle. Opening the tailgate causes the display
to disappear.
Clean the reversing camera regularly
using a soft, dry cloth.
5
Driving

199
208_en_Chap08_Informations-pratiques_ed01-2015
Triangle
Before getting out of your vehicle to
assemble the triangle and place it on
the road, put on your high visibility vest.
The dimensions of the warning triangle, once
folded are as follows:
- A: length = 438 mm,
- B: height = 56 mm,
- C: width = 38 mm. These are the internationally
recognised values.
Use the triangle in line with local driving
regulations.
Refer to the manufacturer's instructions for use
of the triangle.Placing the triangle in the
road
F
Place the triangle at a distance behind
the vehicle, as shown in the table below,
according to the type of road and the level
of ambient light.
Distance from your vehicle (in metres) Road Motor way
Day Night
50 m 80 m150 m
8
Practical information

218
208_en_Chap08_Informations-pratiques_ed01-2015
Affaire version
Number of seats: 2.
Boot volume: 1.062 m3
Load floor length: 1.335 m.
Load width between wheel arches: 1.042 m.
Load width at centre: 1.061 m.
Load height at centre: 0.857 m.
Practical information