2015 NISSAN JUKE lock


> (GLW   0RGHO )'@
5-12
Starting anddriving
SSD0860
INTELLIGEN TKEY BATTER YDIS-
CHARGE
GUID-B0D19 56A-5575-42 6F-A28A-6ED 797C76123
If the battery ofthe Intelligent Key isdischarged,
or environmental conditionsinterferewiththe
Intelligent Key operation, starttheengine
according tothe following procedure:
1. Move theshift lever tothe P(Park) position
(for Continuously Variable Transmission
models) orthe shift lever tothe N(Neutral)
position (formanual transmission models).
2. Firmly applythefoot brake.
3. Touch theignition switchwiththeIntelligent
K ey as illustrated. (Achime willsound.) 4.
Push theignition switchwhiledepressing
the brake pedalwithin 10seconds afterthe
chime sounds. Theengine willstart.
After step3is performed, whentheignition
switch ispushed withoutdepressing thebrake
pedal, theignition switchposition willchange to
ACC.
NO TE:
. When theignition switchispushed to
the ACC orON position orthe engine is
started bythe above procedures, the
Intelligent Keysystem warning light
may blink inyellow evenifthe Intelli-
gent Keyisinside thevehicle. Thisis
not amalfunction. To stop thewarning
light from blinking, touchtheignition
switch withtheIntelligent Keyagain.
. Ifthe Intelligent Keysystem warning
light inthe meter isblinking ingreen,
replace thebattery assoon aspossible.
(See ªIntelligent Keybattery replace-
mentº (P.8-23) .)
GUID-99D A8E7B-99CA -40D0-B1AA-E 547E7042524
. Make surethearea around thevehicle is
clear.
. Check fluidlevels suchasengine oil,cool-
ant, brake fluid,andwindow washerfluidas
frequently aspossible, oratleast whenever
you refuel.
. Check thatallwindows andlights areclean.
. Visually inspecttiresfortheir appearance
and condition. Alsocheck tiresforproper
inflation.
. Lock alldoors.
. Position seatandadjust headrestraints.
. Adjust insideandoutside mirrors.
. Fasten seatbelts andaskallpassengers to
do likewise.
. Check theoperation ofwarning lightswhen
the ignition switchisplaced inthe ON
position. (SeeªWarning/indicator lightsand
audible remindersº (P.2-12) .)
BEFORE STARTING THEENGINE
&RQGLWLRQ


> (GLW   0RGHO )'@
5-14
Starting anddriving
GUID-00 99E665-725B -489E-B596-F5A3F4CD54DB
CONTINUOUS LY VARIABLE TRANS-
MISSION (CVT)
GUID-C69 9DF0B-987D -4AD2-879E-728294 24A200
The Continuously Variable Transmission (CVT)
in your vehicle iselectronically controlledto
produce maximum powerandsmooth operation.
The recommended operatingprocedures forthis
transmission areshown onthe following pages.
Follow theseprocedures formaximum vehicle
performance anddriving enjoyment.
Engine powermaybeautomatically re-
duced toprotect theCVT ifthe engine
speed increases quicklywhendriving on
slippery roadsorwhile being tested on
some dynamometers.
Starting thevehicle
GUID-5D2 73D53-F49E -430A-9675-C A17371F1DFA
1. After starting theengine, fullydepress the
foot brake pedalbefore moving theshift
lever outofthe P(Park) position.
This CVTisdesigned sothat thefoot
brake pedalmustbedepressed before
shifting fromP(Park) toany driving
position whiletheignition switchisin
the ONposition.
The shift lever cannot bemoved outof
the P(Park) position andinto anyof
the other positions ifthe ignition
switch isplaced inthe LOCK ,OFF or
ACC position orifthe key isremoved. 2.
Keep thefoot brake pedaldepressed, push
the shift lever button andmove theshift lever
to adriving position.
3. Release theparking brakeandfoot brake
pedal, andthen gradually startthevehicle in
motion.
WARNING
. Do not depress theaccelerator
pedal whileshifting fromP(Park)
or N(Neutral) toR(Reverse) ,D
(Drive) ,or manual shiftmode (ifso
equipped) .Always depress the
brake pedaluntilshifting iscom-
pleted. Failure todo socould cause
you tolose control andhave an
accident.
. Cold engine idlespeed ishigh, so
use caution whenshifting intoa
forward orreverse gearbefore the
engine haswarmed up.
. Never shifttoP(Park) orR(Re-
verse) whilevehicle ismoving. Fail-
ure todo socould cause youtolose
control andhave anaccident.
CAUTION
. Except inan emergency, donot shift
to the N(Neutral) positionwhile
driving. Coasting withthetransmis-
sion inthe N(Neutral) positionmay
cause serious damage tothe trans-
mission.
. When stopping thevehicle onan
uphill grade, donot hold thevehicle
by depressing theaccelerator pedal.
The foot brake should beused for
this purpose.
. Do not downshift abruptlyonslip-
pery roads. Thismay cause aloss of
control.
DRIVING THEVEHICLE
&RQGLWLRQ


> (GLW   0RGHO )'@
SSD1140
T o move theshift lever,
: Push
thebutton
*
A
while depressing the
brake
pedal.
: Push
thebutton
*
A
.
: Just
move theshift lever.
Shifting
GUID-8E3 3D228-CFD 5-4E80-8A5F -A2EC598FE23A
After starting theengine, fullydepress thebrake
pedal, pushtheshift lever button andmove the
shift lever fromtheP(Park) position toany ofthe
desired shiftpositions.
WARNING
Apply theparking brakeifthe shift lever
is in any position whiletheengine is
not running. Failuretodo socould
cause thevehicle tomove unexpectedly
or roll away andresult inserious
personal injuryorproperty damage.
If the ignition switchisplaced inthe OFF or
ACC position forany reason whiletheshift lever
is in any positions otherthantheP(Park) ,the
ignition switchcannot beplaced inthe LOCK
position.
If the ignition switchcannot beplaced inthe
L OCK position, performthefollowing steps:
1. Apply theparking brakewhenthevehicle is
stopped.
2. Place theignition switchinthe ON position
while depressing thefoot brake pedal.
3. Move theshift lever tothe P(Park) position.
4. Place theignition switchinthe OFF position.
CAUTION
T o prevent transmission damage,move
the shift lever tothe P(Park) orR
(Reverse) positiononlywhen thevehi-
cle iscompletely stopped.
P (Park) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition whenthevehicle isparked or
when starting theengine. Makesurethevehicle
is completely stopped.Thebrake pedalmust
be depressed andtheshift lever button
pushed into move theshift lever fromN
(Neutral) orany drive position toP(Park) .
Apply theparking brake.Whenparking onahill,
apply theparking brakefirst,then move theshift
lever tothe P(Park) position.
R (Reverse) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Use thisposition toback up.Make surethe
vehicle iscompletely stoppedbeforeselecting
the R(Reverse) position.Thebrake pedal
must bedepressed andtheshift lever
button pushed into move theshift lever
from P(Park) ,N (Neutral) orany driving
position toR(Reverse) .
N (Neutral) :
GUID-F 83C168B-173D -4313-B631-F712588C04 63
Neither forward norreverse gearisengaged.
Starting anddriving
5-15
&RQGLWLRQ


> (GLW   0RGHO )'@
5-18
Starting anddriving
back tothe ONposition. Thevehicle
should returntoits normal operating
condition. Ifitdoes notreturn toits normal
operating condition, haveaNISSAN dealer
check thetransmission andrepair ifne-
cessary.
WARNING
When thehigh fluid temperature pro-
tection modeorfail-safe operation
occurs, vehiclespeedmaybegradually
reduced. Thereduced speedmaybe
lower thanother traffic,which could
increase thechance ofacollision. Be
especially carefulwhendriving. Ifne-
cessary, pulltothe side ofthe road ata
safe place andallow thetransmission
to return tonormal operation, orhave it
repaired if
necessary.
SSD1142
Shift lockrelease
GUID-39E4 740A-3513-44A0-A3 06-744DB1802606
If the battery charge islow ordischarged, the
shift lever maynotbemoved fromtheP(Park)
position evenwiththebrake pedal depressed
and theshift lever button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Place theignition switchinthe OFF or
L OCK position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover
*
A
using asuitable tool. 4.
Push down theshift lockrelease usinga
suitable tool.
5. Push theshift lever button andmove the
shift lever tothe N(Neutral) positionwhile
holding downtheshift lockrelease.
Place theignition switchinthe ON position. The
vehicle maybemoved tothe desired location.
Replace theremoved shiftlockrelease cover
after theoperation.
If the battery isdischarged completely,the
steering wheelcannot beunlocked. Donot
move thevehicle withthesteering wheellocked.
If the shift lever cannot bemoved outofthe P
(Park) position, haveaNISSAN dealercheckthe
CVT system assoon aspossible.
WARNING
If the shift lever cannot bemoved from
the P(Park) position whiletheengine is
running andthebrake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause
an accident injuringyourself and
others.
&RQGLWLRQ


> (GLW   0RGHO )'@
5-36
Starting anddriving
GUID-EC3 A4D5C-5B0D -4B05-8797-16078A3B B5CF
BRAKE ASSIST
GUID-4F7C1 0AE-4D30-42D8-A185-FF 61F97693EE
When theforce applied tothe brake pedal
exceeds acertain level,theBrake Assist is
activated generating greaterbraking forcethana
conventional brakebooster evenwithlight pedal
force.
WARNING
The Brake Assist isonly anaid toassist
braking operation andisnot acollision
warning oravoidance device.Itis the
driver's responsibility tostay alert, drive
safely andbeincontrol ofthe vehicle at
all times.
ANTI-L OCKBRAKING SYSTEM (ABS)
GUID-AD93 4732-3AE5-459A-B8C3 -7A014C0C24D9
WARNING
. The Anti-lock BrakingSystem(ABS)
is asophisticated device,butit
cannot prevent accidents resulting
from careless ordangerous driving
techniques. Itcan help maintain
vehicle control duringbraking on
slippery surfaces. Remember that
stopping distances onslippery sur-
faces willbelonger thanonnormal surfaces
evenwithABS. Stopping
distances mayalso belonger on
rough, gravelorsnow covered
roads, orifyou areusing tirechains.
Always maintain asafe distance
from thevehicle infront ofyou.
Ultimately, thedriver isresponsible
for safety.
. Tire type andcondition mayalso
affect braking effectiveness.
Ð When replacing tires,install the
specified sizeoftires onallfour
wheels.
Ð When installing aspare tire,
make surethatitis the proper
size andtype asspecified onthe
Tire andLoading Information
label. SeeªTire andLoading
Information labelº(P.9-12) of
this manual.
Ð For detailed information, see
ª Wheels andtiresº (P.8-31) of
this manual.
The Anti-lock BrakingSystem(ABS)controls
the brakes sothe wheels donot lock during hard
braking orwhen braking onslippery surfaces.
The system detects therotation speedateach wheel
andvaries thebrake fluidpressure to
prevent eachwheel fromlocking andsliding. By
preventing eachwheel fromlocking, thesystem
helps thedriver maintain steeringcontroland
helps tominimize swerving andspinning on
slippery surfaces.
Using thesystem
GUID-597 530BD-6BA 0-4B9D-B015-6FBB8D 66C7EE
Depress thebrake pedalandhold itdown.
Depress thebrake pedalwithfirmsteady
pressure, butdonot pump thebrakes. The
ABS willoperate toprevent thewheels from
locking up.Steer thevehicle toavoid obstacles.
WARNING
Do not pump thebrake pedal. Doingso
may result inincreased stoppingdis-
tances.
Self-test feature
GUID-A 2B20D88- 3F8D-458B-A0 1C-ABFC4E8BBA39
The ABS includes electronic sensors,electric
pumps, hydraulic solenoids andacomputer. The
computer hasabuilt-in diagnostic featurethat
tests thesystem eachtimeyoustart theengine
and move thevehicle atalow speed inforward
or reverse. Whentheself-test occurs,youmay
hear aªclunkº noiseand/or feelapulsation inthe
brake pedal. Thisisnormal anddoes not
BRAKE ASSIST
&RQGLWLRQ


> (GLW   0RGHO )'@
indicate amalfunction. Ifthe computer sensesa
malfunction, itswitches theABS offand
illuminates theABS warning lightonthe
instrument panel.Thebrake system thenoper-
ates normally ,but without anti-lock assistance.
If the ABS warning lightilluminates duringthe
self-test orwhile driving, havethevehicle
checked byaNISSAN dealer.
Normal operation
GUID-9CB A1EE9-2858-46A7-AF1 C-F9A91252FE68
The ABS operates atspeeds above3to 6MPH
(5 to10 km/h) .The speed variesaccording to
road conditions.
When theABS senses thatoneormore wheels
are close tolocking up,the actuator rapidly
applies andreleases hydraulic pressure. This
action issimilar topumping thebrakes very
quickly .You may feelapulsation inthe brake
pedal andhear anoise fromunder thehood or
feel avibration fromtheactuator whenitis
operating. Thisisnormal andindicates thatthe
ABS isoperating properly.However, thepulsa-
tion may indicate thatroad conditions are
hazardous andextra careisrequired while
driving.
GUID-4D5 7C7DA-67 68-4F4F-88 24-D372FBB 702EE
The Vehicle Dynamic Control(VDC)system
uses various sensors tomonitor driverinputs
and vehicle motion. Undercertain drivingcon-
ditions, theVDC system helpstoperform the
following functions.
. Controls brakepressure toreduce wheel
slip onone slipping drivewheel sopower is
transferred toanon slipping drivewheel on
the same axle.
. Controls brakepressure andengine output
to reduce drivewheel slipbased onvehicle
speed (traction controlfunction) .
. Controls brakepressure atindividual wheels
and engine outputtohelp thedriver maintain
control ofthe vehicle inthe following
conditions:
Ð understeer (vehicletendstonot follow
the steered pathdespite increased
steering input)
Ð oversteer (vehicletendstospin dueto
certain roadordriving conditions) .
The VDC system canhelp thedriver tomaintain
control ofthe vehicle, butitcannot prevent loss
of vehicle controlinall driving situations.
When theVDC system operates, theVDC
warning light
in the instrument panelflashes
so note thefollowing:
. The road maybeslippery orthe system may
determine someaction isrequired tohelp keep
thevehicle onthe steered path.
. You may feelapulsation inthe brake pedal
and hear anoise orvibration fromunder the
hood. Thisisnormal andindicates thatthe
VDC system isworking properly.
. Adjust yourspeed anddriving tothe road
conditions.
If a malfunction occursinthe system, theVDC
warning light
illuminates inthe instrument
panel. TheVDC system automatically turnsoff.
The VDC OFFswitch isused toturn offthe VDC
system. TheVDC offindicator
illuminates to
indicate theVDC system isoff. When theVDC
switch isused toturn offthe system, theVDC
system stilloperates toprevent onedrive wheel
from slipping bytransferring powertoanon
slipping drivewheel. TheVDC warning light
flashes ifthis occurs. Allother VDCfunctions
are off,and theVDC warning light
will not
flash. TheVDC system isautomatically resetto
on when theignition switchisplaced inthe off
position thenback tothe onposition.
See ªVehicle Dynamic Control(VDC)warning
lightº (P.2-17) andªVehicle Dynamic Control
(VDC) offindicator lightº(P.2-19) .
The computer hasabuilt-in diagnostic feature
that tests thesystem eachtimeyoustart the
engine andmove thevehicle forward orin
reverse ataslow speed. Whentheself-test
Starting anddriving
5-37
VEHICLE DYNAMIC CONTROL (VDC)
S Y STEM
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-5460F B5E-5751-4144-BEDA-9 C44CC26E1E8
FREEING AFROZEN DOORLOCK
GUID-C74 B4044-96AE-491C-B C91-45A9E CC9A5E7
T o prevent adoor lockfrom freezing, apply
deicer through thekey hole. Ifthe lock becomes
frozen, heatthekey before inserting itinto the
key hole oruse theIntelligent Key system.
ANTI-FREEZE
GUID-90BF B791-C394 -4902-BD39-3C2F719 5DC93
In the winter whenitis anticipated thatthe
outside temperature willdrop below 328F(08C) ,
check theanti-freeze toassure proper winter
protection. Foradditional information, seeªEn-
gine cooling systemº (P.8-7) .
BA TTER Y
GUID-EB5 AE933-122D -4608-B599-298971BE3 1E0
If the battery isnot fully charged during
extremely coldweather conditions, thebattery
fluid mayfreeze anddamage thebattery .To
maintain maximum efficiency,the battery should
be checked regularly.For additional information,
see ªBatteryº (P.8-13) .
DRAINING OFCOOLANT WATER
GUID-A4BF6 6A7-0598-4C 4A-8F3F-1B3EE14A1F6A
If the vehicle isto be left outside withoutanti-
freeze, drainthecooling system, including the
engine block.Refillbefore operating thevehicle.
For details, seeªEngine coolingsystemº (P.8-7) .
TIRE EQUIPMENT
GUID-9C84 39E1-BA84-4 85E-ACF6-DFC2574800 D6
SUMMER tireshave atread designed toprovide
superior performance ondry pavement. How-
ever, theperformance ofthese tireswillbe
substantially reducedinsnowy andicycondi-
tions. Ifyou operate yourvehicle onsnowy oricy
roads, NISSAN recommends theuse ofMUD &
SNOW orALL SEASON tiresonallfour wheels.
Consult aNISSAN dealerforthe tiretype, size,
speed ratingandavailability information.
For additional tractiononicy roads, studded
tires maybeused. However, someU.S.states
and Canadian provinces prohibittheiruse.
Check local,stateandprovincial lawsbefore
installing studdedtires.
Skid andtraction capabilities ofstudded
snow tires,onwet ordry surfaces, maybe
poorer thanthatofnon-studded snow
tires.
Tire chains maybeused. Fordetails, seeªTire
chainsº (P.8-39) ofthis manual.
All-Wheel Drive(AWD) model
GUID-CA 8E5B24-EE0 B-4E6E-8EC1-7A9D 3E4537A5
If you install snowtires,theymust alsobethe
same size,brand, construction andtread pattern
on allfour wheels.
SPECIAL WINTEREQUIPMENT
GUID-349 1A18F-97B 7-48DE-9D7 7-0C0C0BB3803C
It is recommended thatthefollowing itemsbe
carried inthe vehicle duringwinter:
. Ascraper andstiff-bristled brushtoremove
ice and snow fromthewindows andwiper
blades.
. Asturdy ,flat board tobe placed underthe
jack togive itfirm support.
. Ashovel todig thevehicle outofsnow-
drifts.
. Extra window washerfluidtorefill the
reservoir tank.
DRIVING ONSNOW ORICE
GUID-286 40823-2F38 -49A8-9D56- 4832A7583977
WARNING
. Wet ice(328F ,08C and freezing rain),
very cold snow orice can beslick
and very hard todrive on.The
vehicle willhave much lesstraction
or ªgripº undertheseconditions. Try
to avoid driving onwet iceuntil the
road issalted orsanded.
. Whatever thecondition, drivewith
caution. Accelerate andslow down
with care. Ifaccelerating ordown-
shifting toofast, thedrive wheels
will lose even more traction.
Starting anddriving
5-39
COLD WEATHER DRIVING
&RQGLWLRQ


> (GLW   0RGHO )'@
5-40
Starting anddriving
. Allow morestopping distanceunder
these conditions. Brakingshouldbe
started soonerthanondry pave-
ment.
. Allow greater following distances
on slippery roads.
. Watch forslippery spots(glare ice).
These mayappear onanotherwise
clear roadinshaded areas.Ifa
patch ofice isseen ahead, brake
before reaching it.Try not tobrake
while onthe ice, and avoid any
sudden steering maneuvers.
. Do not use cruise control onslip-
pery roads.
. Snow cantrap dangerous exhaust
gases underyourvehicle. Keep
snow clearofthe exhaust pipeand
from around yourvehicle.
ENGINE BLOCK HEATER (ifso
equipped)
GUID-9EB D4000-0E2 9-4092-92D 0-5C9ACC0 F9DA3
Engine blockheaters areused toassist incold
temperature starting.
The engine blockheater should beused when
the outside temperature is208F (