2015 NISSAN JUKE lock


> (GLW   0RGHO )'@
6-4
In case ofemergency
WARNING
. Make suretheparking brakeis
securely appliedandtheManual
T ransmission isshifted intoR(Re-
verse) ,or the Continuously Variable
T ransmission intoP(Park) .
. Never change tireswhen thevehicle
is on aslope, iceorslippery areas.
This ishazardous.
. Never change tiresifoncoming
traffic isclose toyour vehicle. Wait
for professional road
assistance.
MCE0001A
Blocking wheels
GUID-B5 F204A8-24 35-40F7-A0 E6-8D2BC69 3DD3A
Place suitable blocks
*
1
at both thefront and
back ofthe wheel diagonally oppositetheflat
tire toprevent thevehicle frommoving whenitis
jacked up.
WARNING
Be sure toblock thewheel asthe
vehicle maymove andresult inpersonal
injury.
SCE0946
Jacking tools
Getting thespare tireand tools
GUID-97946D B1-3B73-45B8-A2F0 -CC2CD616 99B0
Open theliftgate. Raise thecargo floorboard
*
1
. Remove jackingtools.
&RQGLWLRQ


> (GLW   0RGHO )'@
SCE0947
The spare tireislocated underthecargo floor
board.
Loosen theclamp
*
2
and remove thespacer
*
1
and take outthespare tire.
Jacking upthe vehicle andremoving the
damaged tire
GUID-9D4 83FCD-A1F 1-4D38-AB5 2-601B804B7 6EC
WARNING
. Never getunder thevehicle whileit
is supported onlybythe jack. Ifitis
necessary towork under thevehicle,
support itwith safety stands.
. Use only thejack provided withyour
vehicle tolift the vehicle. Donot use
the jack provided withyour vehicle
on other vehicles. Thejack isde-
signed forlifting onlyyour vehicle
during atire change.
. Use thecorrect jack-up points.
Never useanyother partofthe
vehicle forjack support.
. Never jackupthe vehicle morethan
necessary.
. Never useblocks onorunder the
jack.
. Donot start orrun theengine while
vehicle ison the jack, asitmay
cause thevehicle tomove. Thisis
especially trueforvehicles with
limited slipdifferentials. .
Do not allow passengers tostay in
the vehicle whileitis on the jack.
Carefully readthecaution labelattached
to the jack body andthefollowing instruc-
tions.
In case ofemergency
6-5
&RQGLWLRQ


> (GLW   0RGHO )'@
6-6
In case ofemergency
SCE0948
Jack -uppoint
1. Place thejack directly underthejack-up
point asillustrated sothe top ofthe jack
contacts thevehicle atthe jack-up point.
Align thejack head between thetwo
notches inthe front orthe rear asshown.
Also fitthe groove ofthe jack head between
the notches asshown.
The jack should beused onlevel firm
ground.
SCE0504
2. Loosen eachwheel nutone ortwo turns by
turning itcounterclockwise withthewheel
nut wrench. Donot remove thewheel
nuts until thetire isoff the ground.
3. To lift the vehicle, securely holdthejack lever
and rodwith both hands asshown above.
Carefully raisethevehicle untilthetire clears
the ground. Remove thewheel nuts,and
then remove thetire.
&RQGLWLRQ


> (GLW   0RGHO )'@
8-2
Maintenan ceand do-it-you rself
GUID-F9 6B6657-8490 -48CF-8E36-2FC0C96EB EFB
Some day-to-day andregular maintenance is
essential tomaintain yourvehicle goodmechan-
ical condition, aswell asitsemission andengine
performance.
It is the owner's responsibility tomake surethat
the scheduled maintenance, aswell asgeneral
maintenance, isperformed.
As the vehicle owner,youarethe only onewho
can ensure thatyour vehicle receives theproper
maintenance care.You are avital linkinthe
maintenance chain.
SCHEDULED MAINTENANCE
GUID-3B 7A96FC-E80 F-4057-8D4E -C9FA6EC67DE 7
For your convenience, bothrequired andop-
tional scheduled maintenance itemsarede-
scribed andlisted inyour ªNISSAN Serviceand
Maintenance Guideº.You must refertothat
guide toensure thatnecessary maintenance is
performed onyour vehicle atregular intervals.
GENERAL MAINTENAN CE
GUID-49 3839A7-B51 E-43D6-8709-886EBB7EF3EF
General maintenance includesthoseitems
which should bechecked duringnormal day-
to-day operation. Theyareessential forproper
vehicle operation. Itis your responsibility to
perform theseprocedures regularlyaspre-
scribed.
Performing generalmaintenance checksre-
quires minimal mechanical skilland only afew
general automotive tools. These
checks orinspections canbedone by
yourself, aqualified technician or,ifyou prefer, a
NISSAN dealer.
WHERE TO GO FOR SERVICE
GUID-9AC69 D8A-FA6E-4549-95 A3-251C43F083A7
If maintenance serviceisrequired oryour vehicle
appears tomalfunction, havethesystems
checked andserviced byaNISSAN dealer.
NISSAN technicians arewell-trained specialists
and arekept up-to-date withthelatest service
information throughtechnical bulletins,service
tips, andin-dealership informationsystems.
They arecompletely qualifiedtowork on
NISSAN vehiclesbeforeworkbegins.
Y ou can beconfident thataNISSAN dealer's
service department performsthebest jobto
meet themaintenance requirements onyour
vehicle.
GUID-B5 6933A5-9FB0 -4EF0-9C66-D5A1231C0 588
During thenormal day-to-day operationofthe
vehicle, generalmaintenance shouldbeper-
formed regularly asprescribed inthis section. If
you detect anyunusual sounds, vibrations or
smell, besure tocheck forthe cause orhave a
NISSAN dealerdoitpromptly .In addition, you
should notifyaNISSAN dealerifyou think that
repairs arerequired.
When performing anychecks ormaintenance
work, seeªMaintenance precautionsº(P.8-5) .
EXPLANA TIONOFMAINTEN ANCE
ITEMS
GUID-87019D A8-A907-41B0-8B95- 6248ACACE5 9B
Additional information onthe following
items withª*ºisfound laterinthis section.
Outside thevehicle
GUID-FAF E9F42-4CDC-4F7F-AD 9D-4E5B63D18CFE
The maintenance itemslistedhereshould be
performed fromtimetotime, unless otherwise
specified.
Doors andengine hood:Check thatalldoors
and theengine hoodoperate properly.Also
ensure thatalllatches locksecurely .Lubricate
hinges, latches, latchpins,rollers andlinks if
necessary .Make surethatthesecondary latch
keeps thehood fromopening whentheprimary
latch isreleased.
When driving inareas usingroadsaltorother
corrosive materials, checklubrication frequently.
MAINTENAN CEREQUIREME NT GENERALMAINTENANCE
&RQGLWLRQ


> (GLW   0RGHO )'@
Lights*: Cleantheheadlights onaregular basis.
Make surethattheheadlights, stoplights, tail
lights, turnsignal lights, andother lights areall
operating properlyandinstalled securely.Also
check headlight aim.
Road wheel nuts(lugnuts)*: Whenchecking
the tires, make surenowheel nutsaremissing,
and check forany loose wheel nuts.Tighten if
necessary .
Tire rotation*: Tiresshould berotated every
5,000 miles(8,000 km).
Tires*: Checkthepressure withagauge often
and always priortolong distance trips.If
necessary ,adjust thepressure inall tires,
including thespare, tothe pressure specified.
Check carefully fordamage, cutsorexcessive
wear.
Tire Pressure Monitoring System(TPMS)
transmitter components: ReplacetheTPMS
transmitter grommetseal,valve coreandcap
when thetires arereplaced duetowear orage.
Wheel alignment andbalance: Ifthe vehicle
should pulltoeither sidewhile driving ona
straight andlevel road, orifyou detect uneven or
abnormal tirewear, theremaybeaneed for
wheel alignment.
If the steering wheelorseat vibrates atnormal
highway speeds,wheelbalancing maybe
needed. For
additional information regardingtires,refer
to ªImportant TireSafety Informationº (US)or
ªTire Safety Informationº (Canada)inthe War-
ranty Information Booklet.
Windshield: Cleanthewindshield onaregular
basis. Check thewindshield atleast every six
months forcracks orother damage. Havea
damaged windshield repairedbyaqualified
repair facility.
Windshield wiperblades*: Checkforcracks
or wear ifthey donot wipe properly .
Inside thevehicle
GUID-91 3C1231-5D 46-4E18-A23 4-394D01EAA769
The maintenance itemslistedhereshould be
checked onaregular basis,suchaswhen
performing scheduledmaintenance, cleaning
the vehicle, etc.
Accelerator pedal:Checkthepedal for
smooth operation andmake surethepedal
does notcatch orrequire uneven effort.Keep
the floor mataway fromthepedal.
Brake pedal: Checkthepedal forsmooth
operation. Ifthe brake pedalsuddenly goes
down further thannormal, thepedal feels
spongy orthe vehicle seemstotake longer to
stop, seeaNISSAN dealerimmediately .Keep
the floor mataway fromthepedal.
Brakes: Checkthatthebrakes donot pull the
vehicle toone side when applied. Continuously
Variable Transmission (CVT)
P (Park) position mechanism: Onafairly
steep hill,check thatthevehicle isheld securely
with theshift lever inthe P(Park) position
without applying anybrakes.
Parking brake:Checktheparking brake
operation regularly.The vehicle shouldbe
securely heldonafairly steep hillwith onlythe
parking brakeapplied. Ifthe parking brakeneeds
adjusted, seeaNISSAN dealer.
Seat belts: Check thatallparts ofthe seat belt
system (forexample, buckles,anchors, adjusters
and retractors) operateproperly andsmoothly ,
and areinstalled securely.Check thebelt
webbing forcuts, fraying, wearordamage.
Seats: Checkseatposition controls suchas
seat adjusters, seatbackrecliners,etc.toensure
they operate smoothly andthat alllatches lock
securely inevery position. Checkthatthehead
restraints moveupand down smoothly andthat
the locks (ifso equipped) holdsecurely inall
latched positions.
Steering wheel:Checkforchanges inthe
steering conditions, suchasexcessive freeplay,
hard steering orstrange noises.
Warning lightsandchimes: Makesurethat
all warning lightsandchimes areoperating
properly .
Maintena nceand do-it-yo urself
8-3
&RQGLWLRQ

 
> (GLW   0RGHO )'@
GUID-5DF3 0ED3-11F3-4E 7A-8844-31D0A6DFC586
When performing anyinspection ormainte-
nance workonyour vehicle, alwaystakecare
to prevent seriousaccidental injurytoyourself or
damage tothe vehicle. Thefollowing aregeneral
precautions whichshould beclosely observed.
WARNING
. Park thevehicle onalevel surface,
apply theparking brakesecurely
and block thewheels toprevent
the vehicle frommoving. Movethe
shift lever tothe P(Park) position
(CVT model) orthe shift lever tothe
N (Neutral) position(MTmodel) .
. Besure theignition switchisin the
OFF orLOCK position whenper-
forming anyparts replacement or
repairs.
. Ifyou must workwiththeengine
running, keepyourhands, clothing,
hair andtools away frommoving
fans, belts andanyother moving
parts.
. Itis advisable tosecure orremove
any loose clothing andremove any
jewelry, suchasrings, watches, etc.
before working onyour vehicle. .
Always weareyeprotection when-
ever youwork onyour vehicle.
. Ifyou must runtheengine inan
enclosed spacesuchasagarage, be
sure there isproper ventilation for
exhaust gasestoescape.
. Never getunder thevehicle whileit
is supported onlybyajack. Ifitis
necessary towork under thevehicle,
support itwith safety stands.
. Keep smoking materials, flameand
sparks awayfromfueltank andthe
battery.
. The fuel filter orfuel lines should be
serviced byaNISSAN dealerbe-
cause thefuel lines areunder high
pressure evenwhen theengine is
off.
CAUTION
. Do not work under thehood while
the engine ishot. Turn theengine
off and wait until itcools down.
. Avoid directcontact withused en-
gine oiland coolant. Improperly
disposed engineoil,and engine coolant
and/orothervehicle fluids
can damage theenvironment. Al-
ways conform tolocal regulations
for disposal ofvehicle fluid.
. Never leavetheengine orthe CVT
related component harnessesdis-
connected whiletheignition switch
is in the ONposition.
. Never connect ordisconnect the
battery orany transistorized com-
ponent whiletheignition switchis
in the ONposition.
. Your vehicle isequipped withan
automatic enginecooling fan.Itmay
come onatany time without warn-
ing, even ifthe ignition keyisin the
OFF position andtheengine isnot
running. To avoid injury, always
disconnect thenegative battery
cable before working nearthefan.
This ª8.Maintenance anddo-it-yourselfº section
gives instructions regardingonlythose items
which arerelatively easyforanowner toperform.
A genuine NISSAN ServiceManualisalso
available. (SeeªOwner's manual/service manual
order informationº (P.9-21) .)
Y ou should beaware thatincomplete or
Maintena nceand do-it-yo urself
8-5
MAINTENAN CEPRECAUTI ONS
&RQGLWLRQ


> (GLW   0RGHO )'@
8-10
Maintenance anddo-it-yours elf
SDI2651
1. Oilfiller cap
2. Oildrain plug
3. Oilfilter
Engine oiland filter
GUID-0E3 F5EC9-066 C-4F79-BD C5-1BCF07 F45F7E
1. Place alarge drain panunder thedrain plug.
2. Remove theoilfiller cap.
3. Remove thedrain plugwithawrench and
completely draintheoil.
CAUTION
Be careful nottoburn yourself, asthe
engine oilishot.
.
Waste oilmust bedisposed of
properly.
.
Check yourlocal regulations.
(Perform steps4to 7only when theengine
oil filter change isneeded.)
4. Loosen theoilfilter withanoilfilter wrench.
Remove theoilfilter byturning itby hand.
5. Wipe theengine oilfilter mounting surface
with aclean rag.
CAUTION
Be sure toremove anyoldgasket
material remaining onthe mounting
surface ofthe engine. Failuretodo so
could leadtoengine damage.
6. Coat thegasket onthe new filter withclean
engine oil.
7. Screw inthe oilfilter clockwise untilaslight
resistance isfelt, then tighten additionally
more than2/3turn.
Oil filter tightening torque:
11 to15 ft-lb
(14.7 to20.5 N´m)
8. Clean andre-install thedrain plugwitha
new washer. Securely tightenthedrain plug
with awrench. Drain
plugtightening torque:
22 to29 ft-lb
(29 to39 N´m)
Do not use excessive force.
9. Refill theengine withtherecommended oil
through theoilfiller opening, andinstall the
oil filler capsecurely .
See ªCapacities andrecommended fluids/
lubricantsº (P.9-2) fordrain andrefill capa-
city .The drain andrefill capacity depends on
the oiltemperature anddrain time.Use
these specifications forreference only.Al-
ways usethedipstick todetermine the
proper amount ofoil inthe engine.
10. Start theengine andcheck forleakage
around thedrain plugandtheoilfilter.
Correct asrequired.
11. Turn theengine offand wait more than10
minutes. Checktheoillevel withthedipstick.
Add engine oilifnecessary .
After theoperation
GUID-02 E3EFF4-6A0C -4167-AC8B-E5E800B0 3EDA
1. Lower thevehicle carefully tothe ground.
2. Dispose ofwaste oiland filter properly .
&RQGLWLRQ


> (GLW   0RGHO )'@
JUMP STARTING
GUID-C37 C3C0F-280C -4F1D-904A-46ACD5752008
If jump starting isnecessary ,see ªJump startingº
(P .6-8) .If the engine doesnotstart byjump
starting, thebattery mayhave tobe replaced.
Contact aNISSAN dealer.
GUID-0A40 E5F3-EC90-4F03-B955- 4274A23D7967
CAUTION
. Do not ground accessories directly
to the battery terminal. Doingsowill
bypass thevariable voltagecontrol
system andthevehicle battery may
not charge completely.
. Use electrical accessories withthe
engine running toavoid discharging
the vehicle battery.
The variable voltagecontrolsystem measures
the amount ofelectrical discharge fromthe
battery andcontrols voltagegenerated bythe
generator.
GUID-1AF 74337-E57 8-4C98-A7 ED-F2206E 4170AC
SDI1881
1. Alternator
2. Drive beltauto-tensioner
3. Crankshaft pulley
4. Airconditioner compressor
5. Water pump
WARNING
Be sure theignition switchisin the OFF
or LOCK position beforeservicing drive
belts. Theengine couldrotate unex-
pectedly.
1. Visually inspectthebelt forsigns ofunusual
wear, cuts,fraying orlooseness. Ifthe belt is
Maintenance anddo-it-yo urself
8-15
V ARIABLE VOLTAGE CONTROL
S Y STEM DRIVE
BELT
&RQGLWLRQ