> ( G L W 0 R G H O ) ' @
9-20
T echnical andconsumer information
(French speakers) .
T o notify NISSAN ofany safety concerns
please contact ourConsumer Information
Centre tollfree at1-800-387-0122
GUID-550 4BD8C-31D 4-41C9-B8D 7-9AC3DC61F6CA
WARNING
A vehicle equipped withAll-Wheel Drive
(AWD) should neverbetested usinga
two wheel dynamometer (suchasthe
dynamometers usedbysome states for
emissions testing),or similar equip-
ment. Makesureyouinform testfacility
personnel thatyour vehicle isequipped
with AWD before itis placed ona
dynamometer. Usingthewrong test
equipment mayresult intransmission
damage orunexpected vehiclemove-
ment which couldresult inserious
vehicle damage orpersonal injury.
Due tolegal requirements insome states/areas
or provinces, yourvehicle mayberequired tobe
in what iscalled theªready conditionº foran
Inspection/Maintenance (I/M)testofthe emis-
sion control system.
The vehicle isset tothe ªready conditionº when
it is driven through certaindrivingpatterns.
Usually ,the ªready conditionº canbeobtained
by ordinary usageofthe vehicle.
If apowertrain systemcomponent isrepaired or
the battery isdisconnected, thevehicle maybe
reset toaªnot ready conditionº .Before taking the
I/M test, check thevehicle's inspection/
maintenance testreadiness condition. Placethe
ignition switchinthe ON position without
starting theengine. Ifthe Malfunction Indicator
Light (MIL) comes onsteady for20 seconds and
then blinks for10 seconds, theI/M test
condition isªnot readyº .If the MIL does not
blink after20seconds, theI/M test condition is
ªreadyº .
Contact aNISSAN dealertoset ªready condi-
tionº ortoprepare thevehicle fortesting.
READINES SFOR INSPECTIO N/
MAINTENAN CE(I/M) TEST
& R Q G L W L R Q
