2015 NISSAN JUKE brake


> (GLW   0RGHO )'@
5-18
Starting anddriving
back tothe ONposition. Thevehicle
should returntoits normal operating
condition. Ifitdoes notreturn toits normal
operating condition, haveaNISSAN dealer
check thetransmission andrepair ifne-
cessary.
WARNING
When thehigh fluid temperature pro-
tection modeorfail-safe operation
occurs, vehiclespeedmaybegradually
reduced. Thereduced speedmaybe
lower thanother traffic,which could
increase thechance ofacollision. Be
especially carefulwhendriving. Ifne-
cessary, pulltothe side ofthe road ata
safe place andallow thetransmission
to return tonormal operation, orhave it
repaired if
necessary.
SSD1142
Shift lockrelease
GUID-39E4 740A-3513-44A0-A3 06-744DB1802606
If the battery charge islow ordischarged, the
shift lever maynotbemoved fromtheP(Park)
position evenwiththebrake pedal depressed
and theshift lever button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Place theignition switchinthe OFF or
L OCK position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover
*
A
using asuitable tool. 4.
Push down theshift lockrelease usinga
suitable tool.
5. Push theshift lever button andmove the
shift lever tothe N(Neutral) positionwhile
holding downtheshift lockrelease.
Place theignition switchinthe ON position. The
vehicle maybemoved tothe desired location.
Replace theremoved shiftlockrelease cover
after theoperation.
If the battery isdischarged completely,the
steering wheelcannot beunlocked. Donot
move thevehicle withthesteering wheellocked.
If the shift lever cannot bemoved outofthe P
(Park) position, haveaNISSAN dealercheckthe
CVT system assoon aspossible.
WARNING
If the shift lever cannot bemoved from
the P(Park) position whiletheengine is
running andthebrake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause
an accident injuringyourself and
others.
&RQGLWLRQ


> (GLW   0RGHO )'@
MANUAL TRANSMISSIO N(MT)
GUID-578 CD4B7-85A6 -49CB-AB4F-F226DA21 98CA
WARNING
. Do not downshift abruptlyonslip-
pery roads. Thismay cause aloss of
control.
. Do not over-rev theengine when
shifting toalower gear.Thismay
cause aloss ofcontrol orengine
damage.
. When thehigh fluid temperature
protection modeorfail-safe opera-
tion occurs, vehiclespeedmaybe
gradually reduced.Thereduced
speed maybelower thanother
traffic ,which couldincrease the
chance ofacollision. Beespecially
careful whendriving. Ifnecessary,
pull tothe side ofthe road atasafe
place andallow thetransmission to
return tonormal operation, orhave
it repaired ifnecessary.
CAUTION
. Do not rest your footonthe clutch
pedal whiledriving. Thismay da-
mage theclutch.
. Fully depress theclutch pedalbe-
fore shifting tohelp prevent trans-
mission damage.
. Stop yourvehicle completely before
shifting intoR(Reverse) .
. When thevehicle isstopped fora
period oftime, forexample atastop
light, shifttoN(Neutral) andrelease
the clutch pedalwiththefoot brake
applied.
SSD0552
Shifting
GUID-9FDDD F2D-B4D7-4E6E-B1E 7-9D36A148 D03F
T o change gears,orwhen upshifting ordown-
shifting, fullydepress theclutch pedal, shiftinto
the appropriate gear,thenslowly andsmoothly
release theclutch pedal.
T o ensure smooth gearchanges, besure tofully
depress theclutch pedalbefore operating the
shift lever. Ifthe clutch pedalisnot fully
depressed beforethetransmission isshifted, a
gear noise maybeheard. Transmission damage
could occur.
Start thevehicle in1st gear andshift to2nd,
3rd, 4th,5thand 6thgear insequence accord-
ing tovehicle speed.
Starting anddriving
5-19
&RQGLWLRQ


> (GLW   0RGHO )'@
screen.
GUID-31E C2358-F7E 9-4615-836 7-3344BACF 4D60
WARNING
. Be sure theparking brakeisfully
released beforedriving. Failureto
do socan cause brakefailure and
lead toan accident.
. Do not release theparking brake
from outside thevehicle.
. Donot use theshift lever inplace of
the parking brake.Whenparking, be
sure theparking brakeisfully
engaged.
. Donot leave children unattended in
a vehicle. Theycould release the
parking brakeandcause anacci-
dent.
SP A2110
T o apply: Pulltheparking brakeleverup
*
1
.
T o release:
1. Firmly applythefoot brake.
2. While pulling uponthe parking brakelever
slightly ,push thebutton
*
2
and lower the
lever completely
*
3
.
3. Before driving, besure thebrake warning
light goes out.
Starting anddriving
5-25
P ARKING BRAKE
&RQGLWLRQ


> (GLW   0RGHO )'@
accelerator pedal.Your vehicle willmaintain the
set speed.
. To pass another vehicle,depressthe
accelerator pedal.Whenyourelease the
pedal, thevehicle willreturn tothe previously
set speed.
. The vehicle maynotmaintain thesetspeed
on winding orhilly roads. Ifthis happens,
drive without thecruise control.
T o cancel thepreset speed, useone ofthe
following methods:
a) PushtheCANCEL switch.
b) Tap the brake pedal.
c) Turn theMAIN switch off.The CRUISE indicator
light willturn off.
. Ifyou depress thebrake pedalwhilepushing
the ACCEL/RES orCOAST/SET switchand
reset atthe cruising speed,thecruise
control willdisengage. Turn theMAIN switch
off once andthen turniton again.
. The cruise control willautomatically cancelif
the vehicle slowsmorethan8MPH (13
km/h) below thesetspeed.
. Ifyou move theshift lever tothe N(Neutral)
position (Continuously Variable Transmis-
sion models) ordepressing theclutch pedal
(Manual Transmission models),the cruise
control willbecanceled. T
o reset atafaster cruising speed,useone
of the following methods:
. Depress theaccelerator pedal.Whenthe
vehicle attainsthedesired speed,pushand
release theCOAST/SET switch.
. Push andhold theACCEL/RES switch.
When thevehicle attainsthedesired speed,
release theswitch.
. Push, thenquickly release theACCEL/RES
switch. Eachtimeyoudothis, thesetspeed
will increase byabout 1MPH (1.6km/h) .
T o reset ataslower cruising speed,useone
of the following methods:
. Lightly tapthebrake pedal. Whenthe
vehicle attainsthedesired speed,pushthe
COAST/SET switchandrelease it.
. Push andhold theCOAST/SET switch.
Release theswitch whenthevehicle slows
down tothe desired speed.
. Push, thenquickly release theCOAST/SET
switch. Eachtimeyoudothis, thesetspeed
will decrease byabout 1MPH (1.6km/h) .
T o resume thepreset speed, pushand
release theACCEL/RES switch.Thevehicle
will resume thelast setcruising speedwhenthe
vehicle speedisover 25MPH (40km/h) .
GUID-EC2F D794-8914-4CC0-A38E-2BDC09 CE9FF5
CAUTION
During thefirst 1,200 miles (2,000 km),
follow theserecommendations toob-
tain maximum engineperformance and
ensure thefuture reliability andecono-
my ofyour newvehicle. Failureto
follow theserecommendations may
result inshortened enginelifeand
reduced engineperformance.
. Avoid driving forlong periods atconstant
speed, eitherfastorslow .Do not run the
engine over4,000 rpm.
. Donot accelerate atfull throttle inany gear.
. Avoid quickstarts.
. Avoid hardbraking asmuch aspossible.
Starting anddriving
5-27
BREAK-IN SCHEDULE
&RQGLWLRQ


> (GLW   0RGHO )'@
5-28
Starting anddriving
GUID-7C03 A534-EF0E- 40B7-84F0-1 3B8CB4EE473
Follow theseeasy-to-use FuelEfficient Driving
Tips tohelp youachieve themost fueleconomy
from yourvehicle.
1. Use smooth accelerator andbrake pedal
application.
.
Avoid rapidstarts andstops.
.
Use smooth, gentleaccelerator and
brake application wheneverpossible.
.
Maintain constant speedwhilecommut-
ing and coast whenever possible.
2. Maintain constant speed.
.
Look ahead totry and anticipate and
minimize stops.
.
Synchronizing yourspeed withtraffic
lights allows youtoreduce yournumber
of stops.
.
Maintaining asteady speedcanminimize
red light stops andimprove fueleffi-
ciency .
3. Use airconditioning (A/C)athigher vehicle
speeds.
.
Below 40MPH (64km/h) ,it is more
efficient toopen windows tocool the
vehicle duetoreduced engineload.
.
Above 40MPH (64km/h) ,it is more
efficient touse A/C tocool thevehicle
due toincreased aerodynamic drag.
.
Recirculating thecool airinthe cabin
when theA/C ison reduces coolingload.
4. Drive ateconomical speedsanddistances.
.
Observing thespeed limitandnotex-
ceeding 60MPH (97km/h) (where
legally allowed) canimprove fueleffi-
ciency duetoreduced aerodynamic
drag.
.
Maintaining asafe following distance
behind othervehicles reduces unneces-
sary braking.
.
Safely monitoring traffictoanticipate
changes inspeed permits reduced brak-
ing and smooth acceleration changes.
.
Select agear range suitable toroad
conditions.
5. Use cruise control.
.
Using cruise control duringhighway
driving helpsmaintain asteady speed.
.
Cruise control isparticularly effectivein
providing fuelsavings whendriving on
flat terrains.
6. Plan forthe shortest route.
.
Utilize amap ornavigation systemto
determine thebest route tosave time.
7. Avoid idling.
.
Shutting offyour engine whensafefor
stops exceeding 30-60seconds saves fuel
and reduces emissions.
8. Buy anautomated passfortoll roads.
.
Automated passespermitdrivers touse
special lanestomaintain cruisingspeed
through thetolland avoid stopping and
starting.
9. Winter warmup.
.
Limit idling timetominimize impacttofuel
economy .
.
V ehicles typically neednomore than30
seconds ofidling atstart-up toeffectively
circulate theengine oilbefore driving.
.
Y our vehicle willreach itsideal operating
temperature morequickly whiledriving
versus idling.
10. Keeping yourvehicle cool.
.
Park yourvehicle inacovered parking
area orinthe shade whenever possible.
.
When entering ahot vehicle, opening the
windows willhelp toreduce theinside
temperature faster,resulting inreduced
demand onyour A/Csystem.
FUEL EFFICIENT DRIVINGTIPS
&RQGLWLRQ


> (GLW   0RGHO )'@
A WD shift tips
GUID-C35 72DD7-028 5-47BA-B5AE -F412F28BC6E1
. Ifthe AWD mode switch isoperated while
making aturn, accelerating ordecelerating,
or ifthe ignition switchisturned offwhile in
the AWD-V orAWD mode, youmay feela
jolt. This isnormal.
. The oiltemperature ofpower trainparts will
increase ifthe vehicle iscontinuously
operated underconditions wherethediffer-
ence inrotation between thefront andrear
wheels islarge (wheel slip),such aswhen
driving thevehicle onrough roadsthrough
sand ormud orwhen freeing astuck vehicle.
In these cases, theAWD warning lightblinks
rapidly andtheAWD mode changes tothe
2WD mode toprotect thepower trainparts.
If you stop driving withtheengine idlingand
wait until thewarning lightstops blinking,
the AWD returns tothe AWD-V orAWD
mode.
. Brake distance inthe AWD mode isthe
same as2WD.
CAUTION
. Do not start theengine withthe
AWD mode switch inany mode in
the following cases: Ð
when thevehicle isplaced ona
free-roller orjacking upthe
vehicle withthefront tires
raised andtherear tires onthe
ground.
Ð when towing thevehicle withthe
rear tires raised fromthe
ground.
. Operate theAWD mode switch only
when driving straight. Donot oper-
ate the AWD mode switch when
making aturn orbacking up.
. Do not operate theAWD mode
switch withthefront wheel spin-
ning.
. Engine idlingspeed ishigh while
warming upthe engine. Beespe-
cially careful whenstarting ordriv-
ing onslippery surfaces withthe
AWD mode switch setinthe AWD-V
or AWD mode.
SSD0336-D
A WD WARNING LIGHT
GUID-00 AD0D7B-4E5 0-437F-8A9D-C89C8757 711F
The AWD warning lightlocated inthe instrument
panel illuminates whentheignition switchis
placed inthe ON position. Itturns offsoon after
the engine isstarted.
If any malfunction occursinthe AWD system
while theengine isrunning, orwhile driving, the
Starting anddriving
5-31
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-E73 6AF38-DC1B -4F99-A928-0D36F3C B2A37
SSD0488
WARNING
. Donot stop orpark thevehicle over
flammable materialssuchasdry
grass, wastepaperorrags. They
may ignite andcause afire.
. Never leavetheengine running
while thevehicle isunattended.
. Do not leave children unattended
inside thevehicle. Theycould un-
knowingly activateswitches orcon-
trols. Unattended childrencould
become involved inserious acci- dents.
. Safe parking procedures require
that both theparking brakebe
applied andthetransmission placed
into P(Park) forContinuously Vari-
able Transmission (CVT)model orin
an appropriate gearforManual
T ransmission (MT)model. Failure
to do socould cause thevehicle to
move unexpectedly orroll away and
result inan accident.
. Make surethecontinuously variable
transmission shiftlever hasbeen
pushed asfar forward asitcan go and
cannot bemoved without de-
pressing thefoot brake pedal.
1. Firmly applytheparking brake.
2. Continuously Variable Transmission
(CVT) models:
Move theshift lever tothe P(Park) position.
Manual Transmission (MT)models:
Move theshift lever tothe R(Reverse) gear.
When parking onanuphill grade, placethe
shift lever inthe 1st gear.
3. To help prevent thevehicle fromrolling into
the street whenparked onasloping drive
way ,it is agood practice toturn thewheels
as illustrated.
.
HEADED DOWNHILL WITHCURB:
*
1
T urn thewheels intothecurb andmove
the vehicle forward untilthecurb side
wheel gently touches thecurb.
.
HEADED UPHILLWITHCURB:
*
2
T urn thewheels awayfromthecurb and
move thevehicle backuntilthecurb side
wheel gently touches thecurb.
.
HEADED UPHILLORDOWNHILL, NO
CURB:
*
3
T urn thewheels towardtheside ofthe
road sothe vehicle willmove awayfrom
the center ofthe road ifit moves.
Starting anddriving
5-33
P ARKING/PARKING ONHILLS
&RQGLWLRQ


> (GLW   0RGHO )'@
GUID-C85 EA487-970D -4143-8E32-0A76E249C6 2B
BRAKING PRECAUTION S
GUID-E19 3E720-D85 3-4379-82D C-E8EA84DDFD5B
The brake system hastwo separate hydraulic
circuits. Ifone circuit malfunctions, youwillstill
have braking attwo wheels.
Y ou may feelasmall clickandhear asound
when thebrake pedalisfully depressed slowly.
This isnot amalfunction andindicates thatthe
brake assist mechanism isoperating properly.
V acuum assisted brakes
GUID-0E2 3F656-D41A-4 88F-8147-9851A53DE80D
The brake booster aidsbraking byusing engine
vacuum. Ifthe engine stops,youcan stop the
vehicle bydepressing thebrake pedal. However,
greater footpressure onthe brake pedalwillbe
required tostop thevehicle andthestopping
distance willbelonger.
When thebrake pedalisdepressed slowlyand
firmly ,you may hear aclicking noiseandfeela
slight pulsation. Thisisnormal andindicates that
the Brake Assist System isoperating.
Using thebrakes
GUID-68FF F67F-04F0- 402E-BB4B-8 82B90506CCB
Avoid resting yourfootonthe brake pedalwhile
driving. Thiswillcause overheating ofthe
brakes, wearing outthebrake padsandshoes
faster andreduce gasmileage.
T o help reduce brakewearandtoprevent the
brakes fromoverheating, reducespeedand
downshift toalower gearbefore goingdownaslope
orlong grade. Overheated brakesmay
reduce braking performance andcould resultin
loss ofvehicle control.
WARNING
. While driving onaslippery surface,
be careful whenbraking, accelerat-
ing ordownshifting. Abruptbraking
or accelerating couldcause the
wheels toskid andresult inan
accident.
. Ifthe engine isnot running oris
turned offwhile driving, thepower
assist forthe brakes willnotwork.
Braking willbeharder.
W et brakes
GUID-853 A77D3-7334 -4546-A056-4F624706 91EB
When thevehicle iswashed ordriven through
water, thebrakes maygetwet. Asaresult, your
braking distance willbelonger andthevehicle
may pulltoone side during braking.
T o dry brakes, drivethevehicle atasafe speed
while lightly tapping thebrake pedaltoheat-up
the brakes. Dothis until thebrakes returnto
normal. Avoiddriving thevehicle athigh speeds
until thebrakes function correctly.
Parking brakebreak-in
GUID-3CAC C1C2-C000-436E-B53 F-77E9E90BA938
Break inthe parking brakeshoes whenever the
stopping effectofthe parking brakeisweakened
or whenever theparking brakeshoes and/or
drums/rotors arereplaced, inorder toassure the
best braking performance.
This procedure isdescribed inthe vehicle
service manual andcanbeperformed bya
NISSAN dealer.
Starting anddriving
5-35
BRAKE SY STEM
&RQGLWLRQ