2015 NISSAN JUKE check engine light


> (GLW   0RGHO )'@
2-30
Instrument sand controls
SIC2045
How toarm thevehicle security system
GUID-0B0D5 4E3-2D2E-4E66-84C2-DB 089A802C9C
1. Close allwindows.
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe OFF position
and remove theIntelligent Key from the
vehicle.
3. Close alldoors. Lockalldoors. Thedoors
can belocked with:
.
the L OCK
button onthe Intelligent
K ey
.
any request switch
.
the power doorlockswitch
.
the mechanical key
4. Confirm thatthesecurity indicator light
illuminates. Thesecurity indicator lightstays
on for about 30seconds. Thevehicle
security systemisnow pre-armed. After
about 30seconds thevehicle security
system automatically shiftsintothearmed
phase. Thesecurity lightbegins toflash
once every approximately 3seconds. If,
during this30-second pre-armtimeperiod,
the door isunlocked, orthe ignition switchis
placed inthe ACC orON position, the
system willnotarm.
Even when thedriver and/or passengers
are inthe vehicle, thesystem willactivate
with alldoors locked withtheignition
switch inthe LOCK position. Whenplacing
the ignition switchinthe ACC orON
position, thesystem willbereleased.
V ehicle security systemactivation
GUID-586 0D76E-23D 8-4381-99F0 -0DD8252DADA1
The vehicle security systemwillgive thefollow-
ing alarm:
. The headlights blinkandthehorn sounds
intermittently .
. The alarm automatically turnsoffafter
approximately 50seconds. However, the
alarm reactivates ifthe vehicle istampered
with again. The
alarm isactivated by:
. Unlocking thedoor without usingthe
Intelligent Key ,the request switchorthe
key .(Even ifthe door isopened byreleasing
the door inside lockknob, thealarm will
activate.)
How tostop anactivated alarm
GUID-C58 BB668-0D8A- 41CA-8C30-D900891AB B1A
The alarm willstop byunlocking adoor by
pushing theUNL
OCK
button onthe
Intelligent Key ,pushing therequest switchor
using thekey.The alarm willnotstop ifthe
ignition switchisplaced inthe ACC orON
position.
If the system doesnotoperate asde-
scribed above,haveitchecked bya
NISSAN dealer.
NISSAN VEHICLE IMMOBILIZE RSYS-
TEM
GUID-82475E C2-840C-467B-A31D-9 7F570513B2F
The NISSAN Vehicle Immobilizer Systemwillnot
allow theengine tostart without theuse ofthe
registered key.
If the engine failstostart using theregistered
key ,it may bedue tointerference causedby
another registered key,an automated tollroad
device orautomated paymentdeviceonthe key
ring. Restart theengine usingthefollowing
procedures:
&RQGLWLRQ

 
> (GLW   0RGHO )'@
GUID-AF2D 0C38-8F40-4385-9E9C -0A71DCA2931A
WARNING
Do not use orallow occupants touse
the seat heater ifyou orthe occupants
cannot monitor elevated seattempera-
tures orhave aninability tofeel pain in
body parts thatcontact theseat. Useof
the seat heater bysuch people could
result inserious injury.
CAUTION
. The battery couldrundown ifthe
seat heater isoperated whilethe
engine isnot running.
. Do not use theseat heater for
extended periodsorwhen noone
is using theseat.
. Do not putanything onthe seat
which insulates heat,suchasa
blanket, cushion, seatcover, etc.
Otherwise, theseat maybecome
overheated.
. Donot place anything hardorheavy
on the seat orpierce itwith apin or
similar object.Thismay result in damage
tothe heater.
. Any liquid spilled onthe heated seat
should beremoved immediately
with adry cloth.
. When cleaning theseat, never use
gasoline, thinner,orany similar
materials.
. Ifany malfunctions arefound orthe
heated seatdoes notoperate, turn
the switch offand have thesystem
checked byaNISSAN dealer.
SIC2770
The seats arewarmed bybuilt-in heaters. The
switches locatedonthe center console canbe
operated independently ofeach other.
1. Start theengine.
2. Select heatrange.
*
1
For high heat, push theHI(High) sideof
the switch.
*
2
For low heat, push theLO (Low) sideof
the switch.
The indicator lightinthe switch
*
3
will
illuminate whentheheater ison.
3. To turn offthe heater, returntheswitch to
the level position. Makesuretheindicator
light goes off.
Instrume ntsand controls
2-41
HEA TED SEATS(ifso equippe d)
&RQGLWLRQ


> (GLW   0RGHO )'@
TROUBLESH OOTING GUIDE
GUID-FD 003181-72 3A-472E-84F 6-40154676082B
Symptom Possible cause Action
totake
When pushing theignition switch
to stop theengine The
Pposition selecting warninglightinthe
meter illuminates andtheinside warning chime
sounds continuously (Continuously Variable
T ransmission models). The
shift lever isnot inthe P(Park)
position. Shift
theshift lever tothe P(Park) position.
When shifting theshift lever tothe
P (Park) position. The
inside warning chimesounds continuously
(Continuously Variable Transmission models).The
ignition switchisin the ACC orON
position. Push
theignition switchtothe OFF posi-
tion.
When opening thedriver's door
to get outofthe vehicle The
inside warning chimesounds continuously .The
ignition switchisin the ACC
position. Push
theignition switchtothe OFF posi-
tion.
When closing thedoor afterget-
ting outofthe vehicle The
Intelligent Key system warning lightinthe
meter blinks inyellow ,and theoutside chime
sounds 3times andtheinside warning chime
sounds forafew seconds. The
ignition switchisin the ACC orON
position. Push
theignition switchtothe OFF posi-
tion.
The Pposition selecting warninglightinthe
meter illuminates andtheoutside chime
sounds continuously (Continuously Variable
T ransmission models). The
ignition switchisin the ACC orOFF
position andtheshift lever isnot inthe P
(Park) position. Move
theshift lever tothe P(Park) position
and push theignition switchtothe OFF
position.
When closing thedoor withthe
inside lockknob turned toLOCK The
outside chimesounds forafew seconds
and allthe doors unlock. The
Intelligent Key isinside thevehicle. Carry
theIntelligent Key with you.
When pushing therequest switch
or the LOCK
button onthe
Intelligent Key tolock thedoor The
outside chimesounds forafew seconds. The
Intelligent Key isinside thevehicle. Carry
theIntelligent Key with you.
A door isnot closed securely . Close
thedoor securely .
When pushing theignition switch
to start theengine The
Intelligent Key system warning lightinthe
meter blinks ingreen. The
battery charge islow . Replace
thebattery withanew one. (See
ªIntelligent Key battery replacementº (P.8-
23) .)
The Intelligent Key system warning lightinthe
meter blinks inyellow andtheinside warning
chime sounds forafew seconds. The
Intelligent Key isnot inthe vehicle. Carry
theIntelligent Key with you.
When pushing theignition switch The
Intelligent Key system warning lightinthe
meter illuminates inyellow . It
warns ofamalfunction withthe
Intelligent Key system. Contact
aNISSAN dealer.
Pre-d riving checks andadjustments
3-11
&RQGLWLRQ


> (GLW   0RGHO )'@
3-16
Pre-driving checksandadjustment s
JVP0338X
When opening thehood:
1. Pull thehood release handle
*
1
located
below theinstrument panel;thehood will
then spring upslightly .
2. Locate thelever
*
2
in between thehood
and grille, andpullthelever upwith your
fingertips.
3. Raise thehood
*
3
.
4. Remove thesupport rod
*
4
and insert it
into theslot
*
5
.
Hold thecoated part
*
A
when removing or
resetting thesupport rod.Avoid direct
contact withthemetal parts,asthey may
be hot immediately aftertheengine hasbeen
stopped.
When closing thehood:
1. While supporting thehood, return the
support rodtoits original position.
2. Slowly lowerthehood toabout 8to 12 in
(20 to30 cm) above thehood lock,thenlet
it drop.
3. Make sureitis securely latched.
GUID-9CA2 02EA-33F9- 40ED-9CE7-7 9784558EBE6
WARNING
. Always besure theliftgate has
been closed securely toprevent it
from opening whiledriving.
. Do not drive withtheliftgate open.
This could allowdangerous exhaust
gases tobe drawn intothevehicle.
See ªExhaust gas(carbon monox-
ide)º (P.5-2) ofthis manual.
. Do not leave children unattended
inside thevehicle. Theycould un-
knowingly activateswitches orcon-
trols. Unattended childrencould
become involved inserious acci-
dents.
. Make surethatallpassengers have
their hands, etc.inside thevehicle
before closing theliftgate.
LIFT GATE
&RQGLWLRQ


> (GLW   0RGHO )'@
3-18
Pre-driving checksandadjustment s
GUID-00F6 53FB-C04F-403C-85F5 -83A24D309 0E8
SP A2336
OPENING THEFUEL -FILLER DOOR
GUID-232 776DC-41D5 -442C-B49A- 681435FB8699
T o open thefuel-filler door,pulltherelease
handle located belowtheinstrument panel.To
lock, close thefuel-filler doorsecurely
.
SP A2800
FUEL -FILLER CAP
GUID-D78 C472D-DEB1 -43D1-82E6-5180D4CDB920
T o remove thefuel-filler cap:
1. Turn thefuel-filler capcounterclockwise
*
1
to remove.
2. Put thefuel-filler caponthe cap holder
*
A
while refueling.
T o install thefuel-filler cap:
1. Insert thefuel-filler capstraight intothefuel-
filler tube.
2. Turn thefuel-filler capclockwise
*
2
until a
single clickisheard.
WARNING
. Gasoline isextremely flammable
and highly explosive undercertain
conditions. You could beburned or
seriously injuredifitis misused or
mishandled. Alwaysstopengine
and donot smoke orallow open
flames orsparks nearthevehicle
when refueling.
. Do not attempt totop offthe fuel
tank after thefuel pump nozzle
shuts offautomatically. Continued
refueling maycause fueloverflow,
resulting infuel spray andpossibly
a fire.
. Use only anoriginal equipment type
fuel-filler capasareplacement. It
has abuilt-in safetyvalveneeded
for proper operation ofthe fuel
system andemission controlsys-
tem. Anincorrect capcanresult ina
serious malfunction andpossible
injury. Itcould alsocause themal-
function indicator lighttocome on.
. Never pourfuelinto thethrottle
body toattempt tostart yourvehi-
cle.
FUEL -FILLER DOOR
&RQGLWLRQ


> (GLW   0RGHO )'@
passenger car.The vehicle isnot
designed forcornering atthe same
speeds asconventional passenger
cars. Failure tooperate thisvehicle
correctly couldresult inloss of
control and/orarollover accident.
. Always usetires ofthe same type,
size, brand, construction (bias,bias-
belted orradial) ,and tread pattern
on allfour wheels. Installtraction
devices onthe front wheels when
driving onslippery roadsanddrive
carefully.
. Besure tocheck thebrakes imme-
diately afterdriving inmud orwater.
See ªBrake systemº (P.5-35) forwet
brakes.
. Avoid parking yourvehicle onsteep
hills. Ifyou getout ofthe vehicle
and itrolls forward, backward or
sideways, youcould beinjured.
. Whenever youdrive off-road
through sand,mudorwater asdeep
as the wheel hub,more frequent
maintenance mayberequired. See
the maintenance informationinthe
ªNISSAN ServiceandMaintenance
Guideº . .
Spinning thefront wheels onslip-
pery surfaces maycause theAWD
warning lighttoflash andtheAWD
system toautomatically switchfrom
the AWD mode tothe 2WD mode.
This could reduce traction. Beespe-
cially careful whentowing atrailer
(AWD model) .
GUID-A A9BA26A-B 49B-43B0-A908-85126 20A8F65
WARNING
Do not operate thepush-button ignition
switch whiledriving thevehicle except
in an emergency. (Theengine willstop
when theignition switchispushed 3
consecutive timesorthe ignition switch
is pushed andheld formore than2
seconds.) Ifthe engine stopswhilethe
vehicle isbeing driven, thiscould lead
to acrash andserious injury.
Before operating thepush-button ignition
switch, besure tomove theshift lever tothe P
(Park) position (forContinuously Variable Trans-
mission models) orthe shift lever tothe N
(Neutral) position(formanual transmission
models) .
Starting anddriving
5-9
PUSH-BUT TON IGNITION SWITCH
&RQGLWLRQ


> (GLW   0RGHO )'@
5-12
Starting anddriving
SSD0860
INTELLIGEN TKEY BATTER YDIS-
CHARGE
GUID-B0D19 56A-5575-42 6F-A28A-6ED 797C76123
If the battery ofthe Intelligent Key isdischarged,
or environmental conditionsinterferewiththe
Intelligent Key operation, starttheengine
according tothe following procedure:
1. Move theshift lever tothe P(Park) position
(for Continuously Variable Transmission
models) orthe shift lever tothe N(Neutral)
position (formanual transmission models).
2. Firmly applythefoot brake.
3. Touch theignition switchwiththeIntelligent
K ey as illustrated. (Achime willsound.) 4.
Push theignition switchwhiledepressing
the brake pedalwithin 10seconds afterthe
chime sounds. Theengine willstart.
After step3is performed, whentheignition
switch ispushed withoutdepressing thebrake
pedal, theignition switchposition willchange to
ACC.
NO TE:
. When theignition switchispushed to
the ACC orON position orthe engine is
started bythe above procedures, the
Intelligent Keysystem warning light
may blink inyellow evenifthe Intelli-
gent Keyisinside thevehicle. Thisis
not amalfunction. To stop thewarning
light from blinking, touchtheignition
switch withtheIntelligent Keyagain.
. Ifthe Intelligent Keysystem warning
light inthe meter isblinking ingreen,
replace thebattery assoon aspossible.
(See ªIntelligent Keybattery replace-
mentº (P.8-23) .)
GUID-99D A8E7B-99CA -40D0-B1AA-E 547E7042524
. Make surethearea around thevehicle is
clear.
. Check fluidlevels suchasengine oil,cool-
ant, brake fluid,andwindow washerfluidas
frequently aspossible, oratleast whenever
you refuel.
. Check thatallwindows andlights areclean.
. Visually inspecttiresfortheir appearance
and condition. Alsocheck tiresforproper
inflation.
. Lock alldoors.
. Position seatandadjust headrestraints.
. Adjust insideandoutside mirrors.
. Fasten seatbelts andaskallpassengers to
do likewise.
. Check theoperation ofwarning lightswhen
the ignition switchisplaced inthe ON
position. (SeeªWarning/indicator lightsand
audible remindersº (P.2-12) .)
BEFORE STARTING THEENGINE
&RQGLWLRQ


> (GLW   0RGHO )'@
5-18
Starting anddriving
back tothe ONposition. Thevehicle
should returntoits normal operating
condition. Ifitdoes notreturn toits normal
operating condition, haveaNISSAN dealer
check thetransmission andrepair ifne-
cessary.
WARNING
When thehigh fluid temperature pro-
tection modeorfail-safe operation
occurs, vehiclespeedmaybegradually
reduced. Thereduced speedmaybe
lower thanother traffic,which could
increase thechance ofacollision. Be
especially carefulwhendriving. Ifne-
cessary, pulltothe side ofthe road ata
safe place andallow thetransmission
to return tonormal operation, orhave it
repaired if
necessary.
SSD1142
Shift lockrelease
GUID-39E4 740A-3513-44A0-A3 06-744DB1802606
If the battery charge islow ordischarged, the
shift lever maynotbemoved fromtheP(Park)
position evenwiththebrake pedal depressed
and theshift lever button pushed.
T o move theshift lever, perform thefollowing
procedure:
1. Place theignition switchinthe OFF or
L OCK position.
2. Apply theparking brake.
3. Remove theshift lockrelease cover
*
A
using asuitable tool. 4.
Push down theshift lockrelease usinga
suitable tool.
5. Push theshift lever button andmove the
shift lever tothe N(Neutral) positionwhile
holding downtheshift lockrelease.
Place theignition switchinthe ON position. The
vehicle maybemoved tothe desired location.
Replace theremoved shiftlockrelease cover
after theoperation.
If the battery isdischarged completely,the
steering wheelcannot beunlocked. Donot
move thevehicle withthesteering wheellocked.
If the shift lever cannot bemoved outofthe P
(Park) position, haveaNISSAN dealercheckthe
CVT system assoon aspossible.
WARNING
If the shift lever cannot bemoved from
the P(Park) position whiletheengine is
running andthebrake pedalisde-
pressed, thestop lights maynotwork.
Malfunctioning stoplights couldcause
an accident injuringyourself and
others.
&RQGLWLRQ