2015 NISSAN ARMADA PLATINUM Owners Manual

back can be reclined to allow occupants to rest
when the vehicle is stopped and the shift lever is
in P (Park) .

3RD ROW BENCH SEAT
ADJUSTMENT
The 3rd row bench seat is non-adjustable. How-
ever, the seats can be folded to lay flat for maxi-
mum cargo capacity. For additional information,
refer to “Flexible seating” in this section.
ARMRESTS (captain’s chairs)
AStowed position
BResting position
To use the armrests, pull them down to the rest-
ing position.
FLEXIBLE SEATING

●Head restraints/headrests should be
adjusted properly as they may provide
significant protection against injury in
an accident. Always replace and adjust
them properly if they have been re-
moved for any reason.
● If the head restraints/headrests are re-
moved for any reason, they should be
securely stored to prevent them from
causing injury to passengers or damage
to the vehicle in case of sudden braking
or an accident.
● When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched posi-
tion. If they are not completely secured,
passengers may be injured in an acci-
dent or sudden stop.
● Properly secure all cargo to help pre-
vent it from sliding or shifting. Do not
place cargo higher than the seatbacks.
In a sudden stop or collision, unsecured
cargo could cause personal injury.
Folding the 2nd row bench seat (if so
equipped)
To fold the 2nd row bench seat flat for maximum
cargo hauling:
1Pull the strap forward, located in the center
of each seat cushion, and fold each seat
cushion toward the front of the vehicle. 2. Pull the strap to release the head
restraint/headrest rearward.

8. Rotate the head restraint/headrest forwardto return it to the normal seating position.

4Then lift up on the recline lever to fold the
seatback flat forward.
5. There is a carpet panel flap that can be folded toward the back of the vehicle. 6. The carpet panel flaps provide a level cargo
floor when the 3rd row seats are also folded
flat. Reverse this process to return the 2nd
row captain’s chairs to a seating position.
Make sure to properly raise the seat-
back to an upright position and push
the seat cushion down into place.
7. Rotate the head restraint/headrest forward to return it to the normal seating position.