A - CANCEL: To deactivate the cruise control
B - ACC RES: To increase the set speed or resume previously set cruise control operation.
C - COAST SET: To set the desired speed and to reduce the set speed
D - ON/OFF: To turn ON/OFF cruise control
To set a cruising speed
1. Press D and the CRUISE indicator light in the
meter cluster will be turned on.
2. Accelerate or decelerate to your desired speed
(above 25 mph). Press C and remove your foot
from the accelerator pedal.
To accelerate or decelerate speed
Press B to increase set cruising speed.
Press C to decrease set cruising speed.
To cancel the cruising speed
Press A or press brake pedal, or press D .
6OWN THE ROAD
– :SHIFT DO WN+ :SHIFT UP
Paddle Shifters (if equipped)
Seat Heater Switch (if equipped)
Position - Action
(HI) - For quick heating
(LO) - To keep the seat warm
Drive Mode Selector (if equipped)
The drive mode can be selected by pressing the
switch while the ignition switch is in the ON
position.
2WD: This mode is for economical driving on
normal dry roads and freeways.
4WD AUTO: This mode is for all driving conditions
on various roads.
4WD LOCK: This mode is for driving in slippery
conditions such as on snow-covered roads or sand.
Cruise Control
AB
C
D
Simply upshift or downshift
with a tap of your fingers,
without moving your hands
from the steering wheel.
You can return to the automatic
shifting mode by pulling the +
(SHIFT UP) side paddle shifter
towards you and holding for
over 2 seconds.
