2015 MITSUBISHI iMiEV clock

7
Comfort controlsVents ................................................................................................7-2 Air conditioning ..........
...........
...........
...........
...........
...........
.........
.....7-4
Important air conditioning operating tips ..
...........
...........
.........
.....7-10
Air purifier ..................................................................................... 7-11 Remote Climate Control (if so equipped)....................................... 7-11 AM/FM electronically tuned radio with CD player ...................... 7-11Error codes .....................................................................................7-19 Handling of compact discs .............................................................7-20 Antenna ..........................................................................................7-22Clock ..............................................................................................7-22 General information about your radio .....
...........
...........
...........
.....7-23
BK0209800US.book 1 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Air conditioning 7-4 Comfort controls
7
Air flows mainly to the windshield and the door windows.
N00730300328
The air conditioning can only be used when the ready indicator is illuminated.
N00730501314
N00736500191
When the electric motor switch is in the “ON” position, select
the blower speed by
turning the blower speed selection dial.Turning the dial clockwise will increase the blower speed; turning the dial c
ounterclockwise will
decrease it. When the dial is set to the “OFF” position, all fan-driven airflow will stop. When the dial is set to the “AUTO” position,the air flow is adjusted automatically accord-
Defroster position Air conditioning
NOTE
 If the energy level gauge is at 0 bars or the power down warning light
illuminates, the
vehicle interior may
not be cooled/heated
even though the dial or switch is operated. Furthermore, the defog performance may bealso reduced. Refer to “Energy leve
l gauge” on page 5-40.
Refer to “Power down warning light” onpage 5-43.
Control panel A- Temperature control dial B- MAX switch C- Blower speed selection dial D- Air conditioning switchE- Mode selection dial F- Air selection switch
NOTE
 There is an interior air temperature sensor (G) in the illustrated position.Never place anything ov
er the sensor, since
doing so will prevent it from functioning properly.
Blower speed selection dial
BK0209800US.book 4 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Air conditioning
Comfort controls 7-5
7
ing to the temperature of the interior and the position of the temperature control dial.
N00736600235
Use this dial to adjust the temperature of the air flow from the vents. Turn the temperature control dial clockwiseto make the air warmer. Turn it counterclock- wise to make the air cooler. When the dial is set to middle (
) position,
only uncooled and unheated air will flow. When the dial is moved to middle (
) posi-
tion when using cooling or heating, cooling or heating stops.
N00736700210
To change the position and amount of air flowing from the vents, turn the mode selec-tion dial. Refer to “Changing the mode selec- tion” on page 7-2.
Temperature control dial
NOTE
 When the dial is moved from middle (
)
position to the left while the air conditioning is not operating, the ai
r temperature will not
change.
 When the dial is moved to middle (
) posi-
tion and then to the left while the air condi-tioning is operating,
the air conditioning
system is operating again.  When the temperature control dial is set to “C” position, the air se
lection will be auto-
matically set to the re
circulation position and
the air conditioning will operate.When the dial is moved thereafter, the air conditioning continues to
operate and the air
selection setting returns to the setting beforethe dial was set to “C” position.
Mode selection dial
NOTE
BK0209800US.book 5 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Air conditioning
Comfort controls 7-7
7
N00731000465
Push the switch, and the air conditioning compressor will turn on. The air conditioning indicator light (A) will come on. Push the switch again and the air condition- ing compressor will stop and the indicatorlight (A) goes off.
N00766500015
When the blower speed selection dial is notOFF and the MAX switch is pressed, the indi- cator light (A) illumina
tes and cooling/heat-
ing performance and
the air conditioning
setting is changed according to the tempera- ture control dial position. When the switch is pr
essed again, the opera-
tion returns to the mode before pressing the switch.
The heating capability is at maximum. The air flow is at maximum. The air conditioning au
tomatically operates
and the cooling capabi
lity is at maximum.
N00731101290
1. Set the mode selection dial to the “ ” position. 2. Set the air selection switch (A) to the out- side position.3. Turn the temperature control dial clock- wise or counterclockw
ise to the desired
temperature between middle (
) and “H”
position.
Air conditioning switch MAX switch
When the temperature control dial is set between middle (
) and “H” position
When the temperature control dial is in middle (
) position
When the temperature control dial is set between “C” and middle (
) position
NOTE
Do not use the cooling/heating function with the MAX switch for a long time. Because the power consumption is gr
eatly increased, the
cruising range is shortened.
 When the blower speed
selection dial or tem-
perature control dial
is operated with the
indicator light illumina
ted, the indicator light
goes out and the selected function overrides others. Other functions return to the mode beforepressing the MAX switch.  When the air conditioning is operated with the MAX switch, the air conditioning does not stop if the func
tion is cancelled.
Operating the air conditioning system Heating
NOTE
BK0209800US.book 7 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Air conditioning 7-8 Comfort controls
7
4. Select the desi
red blower speed.
1. Set the mode selection dial to the “ ” position.2. Set the air selection switch (A) to the out- side position. 3. Turn the temperature control dial clock-wise or counterclockwise to between mid- dle (
) position and “H” position.
4. Turn the blower speed selection dial to any position other than “OFF” position. 5. Press the MAX switch (B).
N00731201363
For ordinary cooling 1. Set the mode selection dial to the “ ” position. 2. Set the air selection switch (A) to the out- side position. 3. Turn the temperature control dial clock- wise or counterclockwise to the desired temperature be
tween middle (
) and “C”
position. 4. Select the desi
red blower speed.
5. Push the air conditioning switch (B).6. When the air conditioning is operating, the switch indicator light (C) illuminates.
NOTE
 When the blower speed selection dial is set to the “AUTO” positi
on, the air flow is
adjusted automatically according to the tem- perature of the interi
or and the position of
the temperature control dial.
Quick heating
NOTE
 Do not use the heating function with the MAX switch for a long time. Because the power consumption is gr
eatly increased, the
cruising range is shortened.
Cooling
BK0209800US.book 8 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Air conditioning
Comfort controls 7-9
7
For quick cooling 1. Set the mode selection dial to the “ ” position. 2. Set the air selection switch (A) to the recirculati
on position.
3. Turn the temperature control dial clock-wise or counterclockwise to between mid- dle (
) and “C” position.
4. Turn the blower speed selection dial toany position other than “OFF” position. 5. Press the MAX switch (B). The air conditioning automatically oper-ates and the indicator light (C) illumi- nates.
N00731400557
To remove frost or fog from the windshield and door windows, use
the mode selection
dial (“ ” or “ ”). Use this setting to ke
ep the windshield and
door windows clear of mist, and to keep the leg area heated (when driving in rain orsnow). 1. Set the air selection switch (A) to the out- side position.
NOTE
 If the outside air is dus
ty or contaminated in
some way, set the air selection switch (A) tothe recirculation positi
on. Let in some out-
side air from time to time for good ventila- tion.  To cool the leg areas,
set the mode selection
dial to the “ ” position.  When the blower speed
selection dial is set
to the “AUTO” position, the air flow is adjusted automatically according to the tem-perature of the interior and the position of the temperature control dial.
NOTE
 Do not use the cooling function with the MAX switch for a l
ong time. Because the
power consumption is gr
eatly increased, the
cruising range is shortened.
Defrosting or defogging (wind- shield, door windows)
CAUTION For safety, make sure you have a clear view through all the windows.
For ordinary defrosting
BK0209800US.book 9 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Important air condit
ioning operating tips
7-10 Comfort controls
7
2. Set the mode select
ion dial to the “ ”
position. 3. Turn the temperature control dial clock-wise or counterclockw
ise to the desired
temperature between middle (
) and “H”
position.4. Select the desi
red blower speed.
5. Push the air conditioning switch (B). For quick defrosting 1. Set the mode selection dial to the “ ” position. 2. Turn the temperature control dial clock- wise or counterclockw
ise to the desired
temperature between middle (
) and “H”
position. 3. Press the MAX switch (A).
N00733700323
1. Park the vehicle in the shade whenever possible. Parking in the hot sun makes thevehicle interior extremely hot which then requires more time to cool. If it is neces- sary to park in the sun, open the windowsfor the first few minutes of air condition- ing to expel the hot air. 2. Afterwards, keep the windows closedwhen the air conditioning is in use. The entry of outside air through open windows will reduce cooling efficiency.
3. When running the air conditioning, make sure the air intake, which is located infront of the windshield, is free of obstruc- tions such as leaves. Leaves collected in the air-intake chamber may reduce airflow and plug the water drains.
If the air conditioning seems less effective than usual, the cause might be a refrigerant leak. Have the system inspected by a certified i-MiEV dealer.
NOTE
 When the mode selection dial is set to the “ ” position, the air conditioning com- pressor runs automatically. Outside air intro-duction will also be se
lected automatically.
 When defrosting, do not set the temperature control dial to the
maximum cool position.
This would blow c
ool air on the window
glass and fog it up.  Since defogging or defrosting with the MAX switch consumes a la
rge amount of power,
stop the switch after
defogging or defrosting.
Use the MAX setting for a long time decreases the cruising range.
Important air conditioning operating tips
Air conditioning system refrig- erant and lubricant recommen- dations
BK0209800US.book 10 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tune
d radio with CD player
7-12 Comfort controls
7
N00711900716 N00712000408
Turn the VOLUME knob clockwise to increase the volume; counterclockwise todecrease the volume.
The status will be displayed in the display.
N00712100672
1. Press the button repeatedly to select the tone, balance and SCV (Speed Com-pensated Volume) function control to change. The order is: BASS
 TREBLE
 FADER
 BALANCE
 SCV

Audio adjust mode OFF
2. Press the SEEK button to change the tone, balance and SCV function setting.The status will be di
splayed in the display.
If the audio system is damaged by foreign objects, water, or fi
re, have the system
checked at a certif
ied i-MiEV dealer.
Volume and tone control panel 1- VOLUME (Volume control) knob 2- SEEK (Audio adjust) button 3- Display4- POWER (On-Off) button 5- (Mode change) buttonTo adjust the volume
NOTE
NOTE
 The volume control mode will shut off auto- matically if the anothe
r mode is selected, or
if no adjustment is ma
de within about 2 sec-
onds.
To adjust the tone
A- Adjust mode B- Adjust levelAdjust Mode
AdjustLevel
SEEK button opera-
tion
BASS
-6 to 6
Stronger Weaker
TRE- BLE
Stronger Weaker
FADER
F11 to R11
F (Front) increases
R (Rear) increases
BAL- ANCE
L11 to R11
R (Right) increases
L (Left) increases
BK0209800US.book 12 ページ ２０１４年１月１４日　火曜日　午前９時２６分