2015 MITSUBISHI iMiEV display

Instrument cluster 5-38 Features and controls
5
2. Give the reset button (D) a long push (at least 2 seconds) to make the spanner mark(A) start flashing. (If you do not touch the reset button for about 10 seconds while the spanner mark is
flashing, the display
will revert to its
original indication.)
3. Give the reset butt
on (D) a gentle push
while the spanner mark is flashing. The “------” indication (B) will change to “cLEAr” (C). 4. The driving distance or number of months remaining until the ne
xt periodic inspec-
tion will be shown.
N00572600019
Each time you press the dash lights illumina-tion button (B), the brightness of the instru- ments changes.
N00572700036
This displays the approximate cruising range (how many more miles
or kilometres you can
drive). When the cruising range becomes short, the indicatio
n changes to “---”.
CAUTIONThe customer is responsible for making sure that regular inspections
and maintenance are
performed. Inspections and mainte
nance must be per-
formed to prevent accidents and malfunc-tions.NOTE
 It is not possible to re
set the “------” indica-
tion (B) with the electric motor switch in the “ON” position.  When a certain distance has been driven and a certain period has elapsed after appearance of the “------” indicati
on (B), the indication
is automatically re
set and the number of
months until the next
periodic inspection is
shown.
 If you accidentally rese
t the display, consult
a certified i-MiEV dealer for assistance.
Dash lights brightness indicator A- Brightness display B- Dash lights illumination button
NOTE
Bright Dim
NOTE
 You can adjust to 4 different levels for when the parking lights or
headlights are illumi-
nated and 4 for when they are not.  If you press and hold the button for longer than about 1 second, the brightness automati-cally scrolls through its different levels, and stops scrolling when you release the button. Select your desired
level of brightness.
 When the combination headlights and dim- mer switch is in the “AUTO” position, themeter illumination switches automatically to the adjusted bright
ness, depending on the
brightness outside the vehicle.  The brightness level
of the instruments is
stored when the electric motor switch isturned off.  If the 12V starter battery is disconnected for a long time, these level of brightness will be reset.
Cruising range indicator
BK0209800US.book 38 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Instrument cluster
Features and controls 5-39
5
N00573000010
This value (A) shows the outside temperature of the vehicle.
If the outside temperature drops below approximately 37 °F (3 °C), the alarm sounds and the outside air temperature warning indi- cator (B) flash for a
pproximately 10 seconds
to show there is a danger the road might be icy.
N00573100011
When the electric motor switch is in the “ACC” or “ON” position,
pressing the selec-
tor button (A) for more than 2 seconds will switch the outside temperature unit between °F and °C.
NOTE
 The cruising range is
displayed based on the
past drive data. It ma
y vary depending on the
driving condition (roa
d condition, driving
situation, etc.) and
air conditioning operation
status. For example, the cruising range can be short-ened by driving on congested roads, by driv- ing uphill, by repeated ha
rd acceleration, and
by use of the air c
onditioner and heater.
When the 12V starter battery terminal is dis- connected, the power
consumption data of
the main drive lithium-ion battery in the pastis deleted. A different
value from before may
be displayed. Be sure
to use the display only
for reference.  When the main drive lithium-ion battery is charged, the approximate cruising range isupdated.
Outside temperature display
NOTE
 The outside temperatur
e can be displayed
from -40 °F (-40 °C) to 122 °F (50 °C).  When the outside temperature is over 122 °F (50 °C) or below -40 °F (-40 °C), the displaywill remain 122 °F (50 °C) or -40 °F (-40 °C).  The outside temperatur
e displayed may dif-
fer from the actual temperature on account of surrounding conditions,
driving conditions,
etc.
CAUTION Even when the outside air temperature warn- ing indicator (B) indica
tions do not flash, the
road may be icy, so please take care when driving.
Change of the outside temperature unit
BK0209800US.book 39 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tune
d radio with CD player
7-12 Comfort controls
7
N00711900716 N00712000408
Turn the VOLUME knob clockwise to increase the volume; counterclockwise todecrease the volume.
The status will be displayed in the display.
N00712100672
1. Press the button repeatedly to select the tone, balance and SCV (Speed Com-pensated Volume) function control to change. The order is: BASS
 TREBLE
 FADER
 BALANCE
 SCV

Audio adjust mode OFF
2. Press the SEEK button to change the tone, balance and SCV function setting.The status will be di
splayed in the display.
If the audio system is damaged by foreign objects, water, or fi
re, have the system
checked at a certif
ied i-MiEV dealer.
Volume and tone control panel 1- VOLUME (Volume control) knob 2- SEEK (Audio adjust) button 3- Display4- POWER (On-Off) button 5- (Mode change) buttonTo adjust the volume
NOTE
NOTE
 The volume control mode will shut off auto- matically if the anothe
r mode is selected, or
if no adjustment is ma
de within about 2 sec-
onds.
To adjust the tone
A- Adjust mode B- Adjust levelAdjust Mode
AdjustLevel
SEEK button opera-
tion
BASS
-6 to 6
Stronger Weaker
TRE- BLE
Stronger Weaker
FADER
F11 to R11
F (Front) increases
R (Rear) increases
BAL- ANCE
L11 to R11
R (Right) increases
L (Left) increases
BK0209800US.book 12 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tuned radio with CD player
Comfort controls 7-13
7
To select the desired bass level. To select the desi
red treble level.
To balance the volume from the F (front) and the R (rear) speakers.
To balance the volume from the L (left) and the R (right) speakers. Speed Compensated Volume function is a feature that automatically adjusts the VOL- UME, BASS and TREBLE
settings in accor-
dance with the vehicle speed.The effects of the SCV function can be selected either of three levels (LOW, MID and HIGH). Select the degree of your choiceby pressing the SEEK button. If you want to stop th
e SCV function, select
the OFF.
N00734900902 N00735000913
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used. Press the RADIO button to turn ON theradio. 2. Press the RADIO but
ton to select the
desired band (AM/FM1/FM2).
SCV
HIGH, MID, LOW, OFF
HIGH  MID LOW  OFF
HIGH  MID LOW  OFF
BASS (Bass tone control) TREBLE (Treble tone control) FADER (Front/Rear balance con- trol) Adjust Mode
AdjustLevel
SEEK button opera-
tion
BALANCE (Left/Right balance control) SCV (Speed Compensated Vol- ume) function
NOTE
 The audio adjust mode will automatically shut off when another m
ode is selected, or if
no adjustment is made within about 10 sec-onds.
Radio control panel and display 1- FM (FM1/FM2) indicator 2- RADIO (AM/FM selection) button3- MEMORY (Memory selection) button 4- POWER (On-Off) button 5- SCAN button6- SEEK (Up-seek) button 7- SEEK (Down-seek) buttonTo listen to the radio
BK0209800US.book 13 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tune
d radio with CD player
7-14 Comfort controls
7
3. Press the SEEK button
to tune to a station,
or press the MEMORY button either or to tune in to a station memorized. Refer to “Automatic tuning”, “Manualtuning” or “To enter frequencies into the memory”.
After pressing the SEEK button, a receivable station will be automatically selected andreception of the st
ation will begin.
Press the SCAN button.
The radio will tune
consecutively to each
available station for
about 5 seconds per stat
ion. If you want to
stop scanning, press the SCAN button again. The frequency display of the current stationflashes once per second during SCAN. The frequency changes every time the SEEK button is pressed. Press the button to select the desired station.
As many as 6 AM and 12 FM stations can be entered into the memory. To store a frequency in the memory, follow these steps: 1. Press the SEEK button to tune to the fre- quency you wish to keep in the memory. 2. Press the MEMORY button either or
until it beeps. The sound will be momentarily inter- rupted while the frequency is beingentered into the memory. 3. To recall a frequency
that has been saved
in memory, press the MEMORY button briefly for no longer than about 1 second.
N00735300743
Automatic tuning SCAN functionManual tuning
To enter frequencies into the mem- ory
NOTE
 Disconnecting the 12V st
arter battery cables
erases all the radio stat
ion settings stored in
the memory.
CD control panel and display 1- Disc loading slot 2- Eject button3- CD (CD mode changeover) button 4-
TRACK (Fast-forward/Track up) button
5-
TRACK (Fast-reverse/Track down) button
6- CD indicator 7- SEL (Select mode) indicator 8- FOLDER indicator9- TRACK indicator 10- Display 11- RDM/F-RDM indicator
BK0209800US.book 14 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tuned radio with CD player
Comfort controls 7-15
7
N00735502097
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used. 2. Insert the disc with the label facing up.When a disc is inserted, the CD indicator will come on and the CD player will begin playing even if the radio is being used.The CD player will also begin playing when the CD button is pressed with a disc set in the CD player or in the disc loadingslot, even if the radio is being used.
When the eject button is pressed, the disc automatically stops and is ejected. The sys-tem automatically switches to radio mode.
Push the CD button if a disc is already in the CD player. The audio
system will enter CD
mode and start playba
ck. The track number
and the playing time wi
ll appear on the dis-
play. The tracks in the disc will be played consecutively a
nd continuously.
This CD player allows you to play MP3 (MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (recordable CDs), andCD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc may have a maximum of 16 trees, 100folders and 255 files.
During MP3 playback,
the unit can display ID3 tag information. For information concerning ID3 tag, refer to “CD
12- RPT/F-RPT indicator 13- SELECT knob 14- POWER (On-Off) button/PAGE (Title
scroll) button
15- DISP (Title display) button 16- MENU button17- SCAN button 18-
SEEK (Up-seek) button/ (Return) button
19-
SEEK (Down-seek) button/ (Select) button
To listen to a CD To set a disc
NOTE
 For information concerning the adjustment of volume and tone, refer to “To adjust thevolume” on page 7-12 and “To adjust thetone” on page 7-12.  3 inches (8 cm) compact disc cannot be played on this CD player.  For information concerning the handing of the compact discs, re
fer to “Handling of
compact discs” on page 7-20.
To eject a disc
NOTE
 If you do not remove an ejected disc before 15 seconds have elapse
d, the disc will be
reloaded.
To listen to a music CD To listen to an MP3 CD
BK0209800US.book 15 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tune
d radio with CD player
7-16 Comfort controls
7
text and MP3 title di
splay” on page 7-19.
Push the CD button if a disc is already in the CD player.The display shows “READING”, then play- back begins. The folder number, the track number and the playing
time will appear on
the display.
To fast forward or fast
reverse the disc, press
the TRACK button or the TRACK but- ton.
NOTE
 While listening to a
disc on which CD-DA
(CD-Digital Audio) a
nd MP3 files have both
been recorded, you can switch between read- ing of the CD-DA, reading of the MP3 files,and the external audi
o input mode by press-
ing the CD button for 2 seconds or longer (until you hear a beep).  With a disc that contains both CD-DA and MP3 files, the CD-DA files are automati-cally played first.
 The playback sound quality differs depend- ing on the encoding software and the bit rate.For details, refer to
the user manual of your
encoding software.  Depending on file/folde
r configurations on a
disc, it may take some
time before playback
starts.  MP3 encode software and writing software are not supplied with this unit.  You may encounter trouble in playing an MP3 or displaying the information of MP3 files recorded with certain writing softwareor CD recorders (CD-R/RW drivers).  If you record too many folders or files other than MP3 onto a disc, it
may take some time
before playback starts.  This unit does not record MP3 files.  For information concerning CD-Rs/RWs, refer to “Notes on CD-Rs/RWs” on page 7-21.CAUTION Attempting to play a fi
le not in the MP3 for-
mat which has the “.mp3” file name may produce noise from the speakers and speakerdamage, and can damage your hearing.NOTE
Folder selection order/MP3 file playback order (Example) Folder selection In the order File selection In the orderTo fast forward/reverse the disc
Root folder (Root directory)
Tree 1 Tree 2 Tree 3 Tree 4
BK0209800US.book 16 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tuned radio with CD player
Comfort controls 7-17
7
You can fast-forward the disc by pressing the TRACK button. While the button is kept pressed, the disc w
ill be fast-forwarded.
You can fast reverse th
e disc by pressing the
TRACK button. While the button is kept pressed, the disc w
ill be fast-reversed.
You can select your desired track by using the TRACK button. Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP
3 CD, keep pressing
the button to continue
to move up tracks.
Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP
3 CD, keep pressing
the button to continue
to move down tracks.
Operate the following buttons or the SELECT knob to select
desired file.
When this mode is activated by pressing the
button, the SEL indicator will be dis-
played in the display.
N00771500013
1. Press the MENU button until beeps. 2. Press the SEEK / button repeatedly to select the mode. 3. Press the MENU button until you hear a beep. The selected
mode will operate.
Fast forward Fast reverseTo select a desired track Tr a c k u p Tr a c k d o w n
NOTE
 Pressing the TRACK button once during the song will ca
use the CD player to restart
playback from the beginning of the song.
To find a file (MP3 CDs only)
button
:Press the button to start this mode or cancel
the selection.
SELECT knob :Turn the knob to show the
folder or file.
button
:Press the button to select the folder or file.
NOTE
 If no operation is perfo
rmed for 10 seconds
or more or other butt
on is operated after the
SELECT knob has been turned, searching ofthe desired file is canceled.  If no operation is performed for 5 seconds or more after the file is
displayed, playback
starts.
 When the SEL indicator is not shown on the display and the SELECT knob is operated,the volume adjustment is effective.
To select the playing mode
NOTE(MP3 CDs only) (MP3 CDs only)
BK0209800US.book 17 ページ ２０１４年１月１４日　火曜日　午前９時２６分