2015 MERCEDES-BENZ SLK-Class lock

[x] Cancel search: lock

Page 153 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual i
The ECO start/stop function is not avail-
able when reverse gear is engaged.
Further information on the ECO start/stop function (Y page 144). Shift recommendation
X
Shift gear according to gearshift

Page 154 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual Transmission positions
0045 Park position
Do not shift the transmission into
position P(Y page 151) unless the
vehicle is stationary. The parking
lock should not be used as a brake when parking. Alway

Page 160 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual Problems with the transmission
Problem
Possible causes/consequences and
0050
0050Solutions The transmission has
problems shifting gear. The transmission is losing oil.
X Have the transmission checked

Page 161 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual and, if applicable, the auxiliary heating before
refueling. G
WARNING
Fuel is poisonous and hazardous to health.
There is a risk of injury.
You must make sure that fuel does not come into contact with

Page 162 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual X
Switch the engine off.
X Remove the SmartKey from the ignition
lock.
X Press the fuel filler flap in the direction of
arrow 0043.
The fuel filler flap swings up.
X Turn the fuel filler flap counter-

Page 163 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual Problems with fuel and the fuel tank
Problem
Possible causes/consequences and
0050
0050Solutions Fuel is leaking from the
vehicle. The fuel line or the fuel tank is faulty.
G WARNING
Risk of explosion

Page 164 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual !
Always secure the vehicle correctly
against rolling away. Otherwise, the vehicle
or its drivetrain could be damaged.
To ensure that the vehicle is secured against rolling away unintentionally:
R the

Page 165 of 358

MERCEDES-BENZ SLK-Class 2015 R172 Owners Manual The function of the electric parking brake is
dependent on the on-board voltage. If the on-
board voltage is low or there is a malfunction in the system, it may not be possible to apply
the released p