2015 MERCEDES-BENZ GLC SUV buttons

[x] Cancel search: buttons

Page 9 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual Axle load, permissible (trailer tow-
ing)
...................................................... 492 B
Bag hook ............................................ 397
Ball coupling
Swinging in .............

Page 23 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual Service products
AdBlue ®
special additives .............. 484
Brake fluid .....................................4 86
Coolant (engine) ............................ 487
Engine oil .....................

Page 99 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual between the key and the corresponding door
handle must not be greater than 1 m.
A brief radio connection between the vehicle and the key determines whether a valid key isin, or in the direct vicinity

Page 100 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual The KEYLESS-GO function is changed as fol-
lows:
X To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
X To unlock centrally: touch the inner sur-
fac

Page 101 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual Mercedes-Benz recommends that you have
the batteries replaced at a qualified specialist workshop.
Checking the battery X
Press the &or% button.
The battery is working properly if battery
check lamp :l

Page 105 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual X
To unlock: press button :.
X To lock: press button ;.
When the front-passenger door is closed,
the vehicle is locked.
This does not lock or unlock the fuel filler flap. You cannot unlock the vehicle

Page 124 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual The seat belt should:
R fit snugly across your body
R be routed across the middle of your shoul-
der
R be routed across your hips in the pelvic
area
X Before starting off, adjust the rear-view mir-
ro

Page 130 of 497

MERCEDES-BENZ GLC SUV 2015  Owners Manual Problems with the seat heating
Problem
Possible causes/consequences and
M
MSolutions The seat heating has
switched off prema-
turely or cannot be
switched on. The on-board voltage is too low because t
Page:   1-8 9-16 next >