2015 MAZDA MODEL 3 HATCHBACK tow

16
2.4.4 Manipulating the map
By touching and dragging any part of the map screen, it can be moved to \
a location close to
the currently displayed map.
In addition, the map operation button is displayed, and by touching each\
of the buttons, you
can zoom in and out of maps, change the map perspective and select a des\
tination.
Action Button(s)Description
Map movement
using touch and
dragNo buttons
You can move the map in any direction: select
and hold the map, and move your fi nger towards
the direction you want to move the map.
Zooming in and out
, Changes how much of the map is displayed on
the screen.
The navigation system uses high-quality vector
maps that let you examine the map at various
zoom levels, always with optimized content.
Map scaling has a limit in 3D map view mode.
If you zoom out further, the map switches to 2D
view mode.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Tilting up and down
,
Changes the vertical view angle of the map in 3D
mode.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Rotating left and
right
,
Changes the horizontal view angle of the map.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Compass
The direction of the compass shows North.
Select the button to switch to North-up view,
and then select again to rotate the map in the
previous direction.
Open/close
, The UMP (menu bar) is displayed on the lower
part of the screen.
Hides the displayed UMP if the UMP has been
displayed.
/"7"76#&JOEC







50
3.3.4 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings (page 59). 1. Select
after selecting on the MAP screen.
2. Select
.
3. Select any of the listed road types to modify the route. If needed, scro\
ll the list for all road types. You have the following options (their order depends on the selected vehi\
cle
type):
•
- You might need to avoid highways/freeways if you are towing
another vehicle.
•
- Charge roads are pay roads where you can purchase a pass
or vignette to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
•
- The navigation system includes toll roads (pay roads where
there is a per-use charge) in the routes by default. If you disable tol\
l roads, the
navigation system plans the best toll-free route.
•
- The navigation system includes ferries in a planned route by
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
•
- Setting in which routes with carpool lanes can be created or not
created.
•
- The navigation system excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually you cannot reach the\

speed limit on them.
•
- A border crossing may be a shorter route depending on the
route. For this function, you can select whether or not to cross a borde\
r when
planning the route.
4. The route has already been recalculated. Select
to return to the Map screen.
/"7"76#&JOEC







59
4.2.4 Route settings
These settings determine how routes will be calculated.
ButtonDescription
The route calculation can be optimized for different situations. See below
for details.
You might need to avoid highways/freeways if you are towing another
vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to
use the road for a longer period of time. They can be enabled or disabled
separately from toll roads.
The navigation system includes toll roads (pay roads where there is a
per-use charge) in the routes by default. If you disable toll roads, th\
e
navigation system plans the best toll-free route.
The navigation system includes ferries in a planned route by default.
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on
ferries.
Setting in which routes with carpool lanes can be created or not created\
.
The navigation system excludes unpaved roads by default: unpaved roads
can be in a bad condition and usually you cannot reach the speed limit o\
n
them.
A border crossing may be a shorter route depending on the route. For this\

function, you can select whether or not to cross a border when planning \
the route.
/"7"76#&JOEC