2015 MAZDA MODEL 3 HATCHBACK towing

50
3.3.4 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings (page 59). 1. Select
after selecting on the MAP screen.
2. Select
.
3. Select any of the listed road types to modify the route. If needed, scro\
ll the list for all road types. You have the following options (their order depends on the selected vehi\
cle
type):
•
- You might need to avoid highways/freeways if you are towing
another vehicle.
•
- Charge roads are pay roads where you can purchase a pass
or vignette to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
•
- The navigation system includes toll roads (pay roads where
there is a per-use charge) in the routes by default. If you disable tol\
l roads, the
navigation system plans the best toll-free route.
•
- The navigation system includes ferries in a planned route by
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
•
- Setting in which routes with carpool lanes can be created or not
created.
•
- The navigation system excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually you cannot reach the\

speed limit on them.
•
- A border crossing may be a shorter route depending on the
route. For this function, you can select whether or not to cross a borde\
r when
planning the route.
4. The route has already been recalculated. Select
to return to the Map screen.
/"7"76#&JOEC







59
4.2.4 Route settings
These settings determine how routes will be calculated.
ButtonDescription
The route calculation can be optimized for different situations. See below
for details.
You might need to avoid highways/freeways if you are towing another
vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to
use the road for a longer period of time. They can be enabled or disabled
separately from toll roads.
The navigation system includes toll roads (pay roads where there is a
per-use charge) in the routes by default. If you disable toll roads, th\
e
navigation system plans the best toll-free route.
The navigation system includes ferries in a planned route by default.
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on
ferries.
Setting in which routes with carpool lanes can be created or not created\
.
The navigation system excludes unpaved roads by default: unpaved roads
can be in a bad condition and usually you cannot reach the speed limit o\
n
them.
A border crossing may be a shorter route depending on the route. For this\

function, you can select whether or not to cross a border when planning \
the route.
/"7"76#&JOEC