2015 LEXUS LX570 change time

5693-3. Using the audio system
3
Interior features
LX570_OM_OM60L96U_(U) ■
iPod functions ●
When the iPod connected to the system includes iPod video, the system can
only output the sound by touching “Video” on the “iPod” screen.●
Depending on the iPod, the video so und may not be able to be heard.●
When an iPod is connected and the audi o source is changed to iPod mode, the
iPod will resume play from the same point in which it was last used. ●
Depending on the iPod that is connected to the system, certain functions may
not be available. If a function is unavailable due to a malfunction (as opposed to
a system specification), disconnecting the device and reconnecting it once
again may resolve the problem.■
When using an iPod
You maybe unable to use the instrument panel power outlet if the iPod is con-
nected to the USB port at the same time. ■
Battery charge
When an iPod is connected using a genuine iPod cable, the iPod starts charging its
battery. ■
Error messages for iPod
“iPod Error”: This indicates a proble m in the iPod or its connection.
“No music files found.”: This indicates that there is no music data in the iPod.
“Please check the iPod firmware version.”:
This indicates that the software version is not compati-
ble. Perform the iPod fir mware updates and try again.
“iPod authorization failed.”: This indicates th at it failed to authorize the iPod. Please
check your iPod.

6393-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L96U_(U) ■
Call history list ●
If you make a call to or receive a call from a number registered in the phone
book, the name is displayed in the call history. ●
If you make multiple calls to the same number, only the last call made is dis-
played in the call history. ●
Number-withheld calls are also memorized in the system.■
When driving
The functions “Dialing”, “Dialing from the phonebook”, and “Dialing from history”
(except for call using the 25 most recently called numbers shown by “All” tab) are
unavailable. ■
When calling by registered name in the phonebook ●
When “Call ” on the “S hortcut Menu” screen is dimmed, the
phonebook’s voice command recognition cannot be used. Check the Blue-
tooth ®
connection and if the contacts have been transferred to the system.●
Short or abbreviated names in the phonebook may not be recognized. Change
names in the phonebook to full names. ●
Sometimes a voice recognition result co nfirmation screen will be displayed.
After confirming the result, say “Yes” or “No”. ●
When the system recognizes multiple names from the phonebook, a name can-
didate list will be displayed on the screen. If the desired name is not displayed on
the top of the screen, say the number of the name from the candidate list (num-
ber 1 and number 2) to select a name from the candidate list. ●
When a contact has multiple phone numbers registered in the phonebook, a
candidate list will be displayed. If the desired phone number is not displayed on
the top of the screen, say the number of the desired phone number from the
candidate list (number 1 and number 2) to select a phone number from the can-
didate list.

6813-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L96U_(U) ■
Editing the “Device Name”
If you change a device name, the name registered in your cellular phone is not
changed. ■
About “Device Address”
The address peculiar to the system. It cannot be changed. If you have registered
two Bluetooth ®
phones with the same device na me and you cannot distinguish one
from the other, refer to this address. ■
“My Phone Number”:
The phone number of the Bluetooth ®
phone is displayed on the screen. Depending
on the type of phone, the phon e number may no t be displayed.■
“Profiles”:
The compatibility profile of the Bluetooth ®
device is displayed on the screen.■
“Connect Portable Player from”:
There are 2 portable player connection se ttings available; “Vehicle” and “Portable
Player”. ■
When you delete a Bluetooth ®
phone
The phonebook data will be deleted at the same time.

6893-6. Using the interior lights
3
Interior features
LX570_OM_OM60L96U_(U) Luggage compartment light
Off
Door position■
Illuminated entry system
The lights automatically tu rn on/off according to “ENGINE START STOP” switch
mode, the presence of the electronic ke y, whether the doors are locked/unlocked,
and whether the doors are open/closed. ■
To prevent battery discharge
If the interior lights remain on when the “ENGINE START STOP” switch is turned
off, the lights will go off automatically after 20 minutes. ■
Customization
Settings (e.g. Time pe riod before the interior lights turn off.) can be changed.
(Customizable features  P. 912) Luggage compartment light

5
When trouble arises
8755-2. Steps to take in an emergency
LX570_OM_OM60L96U_(U) ■
Stopping the engine
Shift the shift lever to “P ” and press the “ENGINE START STOP” switch as you nor-
mally do when stopping the engine. ■
Replacing the key battery
As the above procedure is a temporary meas ure, it is recommended that the elec-
tronic key battery be replaced immediately when the battery is depleted.
(  P. 784)■
Changing “ENGINE START STOP” switch modes
Within 10 seconds of the buzzer sounding, release the brake pedal and press the
“ENGINE START STOP” switch.
The engine does not start and modes will be changed each time the switch is
pressed. (  P. 178)■
Alarm
Using the mechanical key to lock th e doors will not set the alarm system.
If a door is unlocked using the mechanical key when the alarm system is set, the
alarm may be triggered. (  P. 121)
CAUTION■
When using the mechanical key and operating the power windows and moon
roof
Operate the power window or moon roof after checking to make sure that there is
no possibility of any passenger having any of their body parts caught in the window
or moon roof.
Also, do not allow children to operate the mechanical key. It is possible for children
and other passenger s to get caught in power window and moon roof.

9206-2. Customization
LX570_OM_OM60L96U_(U) * 1
: In this case, the power back door operat ion will be made only by push and hold.
* 2
: The back door can be opened using th e wireless remote control after unlock-
ing the back door.
* 3
: The settings can be changed when the mechanical key linked operation of the
power window is set to ON.
* 4
: The settings can be changed when th e wireless remote control linked opera-
tion of the power window is set to ON.
* 5
: The settings can be changed when the entry function linked operation of the
power window is set to ON.
* 6
: Vehicles sold outside CanadaTurn signal
lever
(  P. 189) Time of flashing of
the lane change
signal flashers 3 Off
O — O5
7
9
11
Eco Driving
Indicator
Light
(  P. 168) Eco Driving
Indicator Light On Off — O OItem Function Default
setting Customized
setting