2062-2. Instrument cluster
LX570_OM_OM60L96U_(U) ■
System check display
After turning the “ENGINE START STOP ” switch to IGNITION ON mode,
“LEXUS” is displayed while system operation is checked. When the system check
is complete, the normal screen will return.■
Turn-by-turn navigation
The turn-by-turn navi gation appears only
while route guidance of the navigation sys-
tem is being performed. When a turn
approaches, the distance to the turn and the
turn direction are displayed.
Turn direction
Distance to the next turn
The image shown may differ from the
actual intersection.
2072-2. Instrument cluster
2
When driving
LX570_OM_OM60L96U_(U) ■
Outside temperature display
In the following situations, the correct ou tside temperature may not be displayed, or
the display may take longer than normal to change: ●
When stopped, or driving at low speeds (less than 12 mph [20 km/h]) ●
When the outside temperature has change d suddenly (at the entrance/exit of a
garage, tunnel, etc.)■
When “--” or “E” is displayed
The outside temperature display may be ma lfunctioning. Take your vehicle to your
Lexus dealer. ■
When disconnecting and reconnecting battery terminals
The following information data will be reset: ●
Average fuel consumption after refueling ●
Average fuel consumption ●
Average vehicle speed
CAUTION■
The information displa y at low temperatures
Allow the interior of the vehicle to warm up before using the information display. At
extremely low temperatures, the information display monitor may respond slowly,
and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear number
appearing on the display. This lag could ca use the driver to downshift again, causing
rapid and excessive engine br aking and possibly an accident resulting in death or
serious injury.
