General Information
This device complies with part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:
•This device may not cause harmful interference.
•This device must accept any interference received,
including interference that may cause undesired op-
eration.
The tire pressure sensors are covered under one of the
following licenses:
United StatesMRXC4W4MA4
Canada2546A-C4W4MA4
FUEL REQUIREMENTS
3.6L Engine
This engine is designed to meet all emis-
sions regulations and provide excellent
fuel economy and performance when us-
ing high-quality unleaded “regular” gaso-
line having an octane rating of 87. The use
of premium gasoline is not recommended, as it will not
provide any benefit over regular gasoline in these en-
gines.
Light spark knock at low engine speeds is not harmful to
your engine. However, continued heavy spark knock at
high speeds can cause damage and immediate service is
required. Poor quality gasoline can cause problems such
as hard starting, stalling, and hesitations. If you experi-
ence these symptoms, try another brand of gasoline
before considering service for the vehicle.
5
STARTING AND OPERATING 525
E-85 Usage In Non-Flex Fuel Vehicles
Non-Flex Fuel Vehicles (FFV) are compatible with gaso-
line containing 10% ethanol (E10). Gasoline with higher
ethanol content may void the New Vehicle Limited
Warranty.
If a Non-FFV vehicle is inadvertently fueled with E-85
fuel, the engine will have some or all of these symptoms:
•Operate in a lean mode.
•OBD II “Malfunction Indicator Light” on.
•Poor engine performance.
•Poor cold start and cold drivability.
•Increased risk for fuel system component corrosion.
To fix a Non-FFV vehicle inadvertently fueled once with
E-85 perform the following:
•Drain the fuel tank (see your authorized dealer).
•Change the engine oil and oil filter.
•Disconnect and reconnect the battery to reset the
engine controller memory.
More extensive repairs will be required for prolonged
exposure to E-85 fuel.
MMT In Gasoline
Methylcyclopentadienyl Manganese Tricarbonyl (MMT)
is a manganese-containing metallic additive that is
blended into some gasoline to increase octane. Gasoline
blended with MMT provides no performance advantage
beyond gasoline of the same octane number without
MMT. Gasoline blended with MMT reduces spark plug
life and reduces emissions system performance in some
vehicles. The manufacturer recommends that gasoline
without MMT be used in your vehicle. The MMT content
of gasoline may not be indicated on the gasoline pump,
5
STARTING AND OPERATING 527
therefore, you should ask your gasoline retailer whether
the gasoline contains MMT. MMT is prohibited in Federal
and California reformulated gasoline.
Materials Added To Fuel
All gasoline sold in the United States is required to
contain effective detergent additives. Use of additional
detergents or other additives is not needed under normal
conditions and they would result in additional cost.
Therefore, you should not have to add anything to the
fuel.
Fuel System Cautions
CAUTION!
Follow these guidelines to maintain your vehicle’s
performance:
(Continued)
CAUTION!(Continued)
•The use of leaded gas is prohibited by Federal law.
Using leaded gasoline can impair engine perfor-
mance and damage the emissions control system.
•An out-of-tune engine or certain fuel or ignition
malfunctions can cause the catalytic converter to
overheat. If you notice a pungent burning odor or
some light smoke, your engine may be out of tune
or malfunctioning and may require immediate ser-
vice. Contact your authorized dealer for service
assistance.
•The use of fuel additives, which are now being
sold as octane enhancers, is not recommended.
Most of these products contain high concentrations
of methanol. Fuel system damage or vehicle perfor-
mance problems resulting from the use of such
fuels or additives is not the responsibility of the
manufacturer.
528 STARTING AND OPERATING
FLUIDS, LUBRICANTS AND GENUINE PARTS
Engine
ComponentFluid, Lubricant, or Genuine Part
Engine CoolantWe recommend you use MOPAR® Antifreeze/Coolant
10 Year/150,000 Mile Formula OAT (Organic Additive
Technology) or equivalent meeting the requirements of
Chrysler Material Standard MS-12106.
Engine OilWe recommend you use API Certified SAE 5W-20
Engine Oil, meeting the requirements of Chrysler Ma-
terial Standard MS-6395 such as MOPAR®, Pennzoil®,
and Shell Helix®. Refer to your engine oil filler cap for
correct SAE grade.
Engine Oil FilterWe recommend you use MOPAR® Engine Oil Filter or
equivalent.
Spark PlugsWe recommend you use MOPAR® Spark Plugs.
Fuel Selection87 Octane
7
MAINTAINING YOUR VEHICLE 647
Flashers
Hazard Warning........................560
Turn Signal...........................103
Flash-To-Pass............................170
Flooded Engine Starting....................422
Fluid, Brake.............................649
Fluid Capacities..........................646
Fluid Leaks.............................103
Fluid Level Checks........................625
Engine Oil............................588
Manual Transmission....................623
Power Steering.........................465
Fluids, Lubricants and Genuine Parts...........647
Fog Lights..............................170
Fog Light Service.........................644
Fold and Tumble Rear Seat..................161
Folding Rear Seat.........................163
Folding Windshield........................291
Four-Way Hazard Flasher...................560
Four Wheel Drive.........................441
Four Wheel Drive Operation.................441
Freeing A Stuck Vehicle.....................574
Front Axle (Differential).....................625
Fuel...................................525
Adding..............................530
Additives.............................528
Clean Air.............................526
Ethanol..............................526
Filler Cap (Gas Cap).....................530
Gasoline..............................525
Gauge...............................306
Materials Added........................528
Methanol.............................526
Octane Rating..........................525
Requirements..........................525
Specifications..........................647
Tank Capacity..........................646
Fueling................................530
678 INDEX
Automatic Dimming.....................112
Electric Powered........................113
Electric Remote.........................113
Heated...............................114
Outside..............................112
Rearview.............................111
Vanity...............................114
Modifications/Alterations, Vehicle...............9
Modular Hard Top........................203
Monitor, Tire Pressure System................513
MOPAR® Parts...........................586
MTBE/ETBE............................526
New Vehicle Break-In Period..................98
Occupant Restraints........................48
Octane Rating, Gasoline (Fuel)................525
Odometer...............................314
Tr i p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..313
Oil Change Indicator.......................317
Oil Change Indicator, Reset..................317
Oil, Engine..............................588
Capacity.............................646
Change Interval........................331
Dipstick..............................588
Disposal..............................590
Filter................................591
Filter Disposal.........................590
Identification Logo......................589
Materials Added to......................590
Pressure Warning Light...................307
Recommendation.......................589
Synthetic.............................590
Viscosity.............................590
Oil Filter, Selection........................591
Oil Pressure Light.........................307
Onboard Diagnostic System..................584
Operating Precautions......................58410
INDEX 683