13
Trip Computer
When the button
1 is pressed, the following
modes will appear on the vehicle information
display
2:
•
MPG – Displays the current fuel consumption.
•
MPG/MPH – Displays the average fuel consumption
and speed since the last reset.
—
To reset the elapsed mpg/mph, press and hold
the
button 3 for more than 1 second. Both
elapsed mpg/mph will reset at the same time.
•
TIME/MILES – Displays the elapsed time and
total distance the vehicle has been driven since
the last reset.
—
To reset the elapsed time and total distance,
press and hold the
button 3 for more than 1 second. Both elapsed time and
total distance will reset at the same time.
•
RANGE – Displays the estimated distance to empty (dte) the vehicle can b\
e driven
before refueling.
•
OUTSIDE TEMP – Displays the exterior air temperature including a low temperature \
warning feature.
•
SETTING – Allows you to set reminders for alerts and maintenance intervals o\
r change the
language and units used in the system.
—
Press the button
3 to cycle through the various setting modes.
—
Press the button
1 to choose the selected mode.
•
WARNING – Displays when a warning is present.
Push the button 3 for approximately 1 second to reset the currently displayed trip
odometer to zero.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
1
3
system guide
2
1811809_15b_Infiniti_Q40_QRG_091014.indd 139/10/14 3:42 PM
