7-69
7
Maintenance
Type B
(1) Stop/Tail lamp (LED)
(2) Stop lamp (Bulb)
(3) Turn signal lamp
(4) Reverse lamp
Stop/Tail lamp
If the LED lamp does not operate,
have the vehicle checked by an
authorised HYUNDAI dealer.
Turn signal lamp
1.Open the boot lid.
2.Remove the service cover by turn-
ing the lock anticlockwise and then
pulling it out.3. Remove the socket from the
assembly by turning the socket
anticlockwise until the tabs on the
socket align with the slots on the
assembly.
4. Remove the bulb from the socket
by pressing it in and rotating it
anticlockwise until the tabs on the
bulb align with the slots in the
socket. Pull the bulb out of the
socket.
5. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
OLF074062OLF074063NTurn Signal lamp
OLF074060
7-70
Maintenance
6. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
Reverse lamp
1. Open the boot.
2. Loosen the retaining screw of the
boot lid cover and then remove the
cover.
3. Disconnect the connector and
then remove the socket by turning
the socket anticlockwise.4. Remove the bulb by pulling it
straight out.
5. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
6. Install the socket into the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
7. Reinstall the boot lid cover by
pushing in the screw.
OLF074064OLF074065N
Reverse lamp
