Page 20 of 34
UNDER HOOD OVERVIEW - 2.0L ECOBOOST™
Engine coolant reservoir.A
Engine oil dipstick.B
Engine oil filler cap.C
Brake fluid and clutch fluid reservoir.D
Battery.E
Engine compartment fuse box.F
Engine air cleaner.G
Washer fluid reservoir.H
17Focus (CDH), enUSA, First PrintingMaintenanceE180866
Page 21 of 34
ENGINE OIL DIPSTICK
Minimum.A
Maximum.B
18Focus (CDH), enUSA, First PrintingMaintenanceE191444AB
Page 26 of 34
ENGINE SPECIFICATIONS
2.0L EcoBoost engineEngine
122Cubic inches
Minimum 87 octaneRequired fuel
1–3–4–2Firing order
Coil on plugIgnition system
9.3:1Compression ratio
0.027-0.031 in (0.70-0.80 mm)Spark plug gap
Drivebelt Routing
2.0L EcoBoost
A.Long drivebelt is on the first pulleygroove closest to the engine.
B.Short drivebelt is on the second pulleygroove farthest from the engine.
MOTORCRAFT PARTS
Part NumberComponent
FA-1908Air filter element
FL-910-SOil filter
BXT-96R-590Battery
23Focus (CDH), enUSA, First PrintingCapacities and SpecificationsE180867
Page 27 of 34
Part NumberComponent
CYFS12Y2Spark plugs
Lifetime filterEngine fuel filter
We recommend Motorcraft replacement parts available at your Ford dealer or atfordparts.com for scheduled maintenance. These parts meet or exceed Ford MotorCompany’s specifications and are engineered for your vehicle. Use of other parts mayimpact vehicle performance, emissions and durability. Your warranty may be void for anydamage related to use of other parts.
If a Motorcraft oil filter is not available, use an oil filter that meets industry performancespecification SAE/USCAR-36.
For spark plug replacement, contact an authorized dealer. Replace the spark plugs at theappropriate intervals.
24Focus (CDH), enUSA, First PrintingCapacities and Specifications
Page 29 of 34
Capacities
CapacityItem
5.7 qt (5.4 L)Engine oil
5.3 qt (5.0 L)Engine coolant
Between MIN and MAX on brake fluid reservoirBrake fluid
1.8 qt (1.7 L)*Manual transmission fluid
* Approximate dry fill capacity. Actual amount may vary during fluid changes.
Specifications
Materials
SpecificationName
WSS-M2C946-ARecommended motor oil (U.S.):Motorcraft SAE 5W-30 Premium Synthetic BlendMotor OilXO-5W30-QSP
WSS-M2C946-ARecommended motor oil (Canada):Motorcraft SAE 5W-30 Super Premium Motor OilCXO-5W30-LSP12
WSS-M2C946-AOptional motor oil (U.S.):Motorcraft SAE 5W-30 Full Synthetic Motor OilXO-5W30-QFS
WSS-M2C946-AOptional motor oil (Canada):Motorcraft SAE 5W-30 Full Synthetic Motor OilCXO-5W30-LFS12
WSS-M97B44-D2Engine coolant (U.S.):Motorcraft Orange Antifreeze/Coolant PredilutedVC-3DIL-B
26Focus (CDH), enUSA, First PrintingCapacities and Specifications
Page 30 of 34

SpecificationName
WSS-M97B44-D2Engine coolant (Canada):Motorcraft Orange Antifreeze/Coolant PredilutedCVC-3DIL-B
WSS-M6C65-A2Brake fluid:Motorcraft DOT 4 Low Viscosity (LV) High Perform-ance Motor Vehicle Brake FluidPM-20
WSS-M2C200-D2Manual transmission fluid:Motorcraft Dual Clutch Transmission FluidXT-11-QDC
If you use oil and fluids that do not meetthe defined specification and viscositygrades this may lead to:
•Component damage which may not becovered by the vehicle Warranty.
•Longer engine cranking periods.
•Increased emission levels.
•Reduced engine performance.
•Reduced fuel economy.
•Degraded brake performance.
We recommend Motorcraft motor oil foryour vehicle. If Motorcraft oil is notavailable, use motor oils of therecommended viscosity grade that meetAPI SN requirements and display the APICertification Mark for gasoline engines. Donot use oil labeled with API SN servicecategory unless the label also displays theAPI certification mark.
An oil that displays this symbol conformsto current engine, emission system andfuel economy performance standards ofthe International Lubricant Standardizationand Approval Committee (ILSAC).
Do not use supplemental engine oiladditives because they are unnecessaryand could lead to engine damage that maynot be covered by your vehicle warranty.
Note:Ford recommends using DOT 4 LowViscosity (LV) High Performance Brake Fluidor equivalent meeting WSS-M6C65-A2. Useof any fluid other than the recommendedfluid may cause degraded brakeperformance and not meet the Fordperformance standards. Keep brake fluidclean and dry. Contamination with dirt,water, petroleum products or othermaterials may result in brake systemdamage and possible failure.
27Focus (CDH), enUSA, First PrintingCapacities and SpecificationsE142732
Page 32 of 34

A
About This Supplement.................................3At a Glance..........................................................5Engine Specifications............................................7Suspension Specifications.................................8Vehicle Specifications...........................................6
B
Base Warranty.................................................28
C
Capacities and Specifications..................26Capacities...............................................................26Specifications........................................................26
D
Driving Hints......................................................15
E
Engine Oil Dipstick..........................................18Engine Overboost...........................................15Engine Overspeed...........................................15Engine Specifications...................................23Drivebelt Routing..................................................23
I
Instrument Cluster...........................................9Introduction........................................................3
M
Maintenance......................................................17Manual Transmission......................................11Operating at High Speeds...................................11Recommended Shift Speeds for MaximumFuel Economy.....................................................11Using the Clutch.....................................................11Motorcraft Parts..............................................23
P
Product History..................................................4GLOBAL PERFORMANCE VEHICLES .............4TEAM RS HISTORY................................................4
R
Roadside Assistance.....................................16Roadside Emergencies.................................16
S
Stability Control...............................................13
T
Technical SpecificationsSee: Capacities and Specifications...............23Tires......................................................................19Optional All-Season Tires................................20Tire Pressure...........................................................19TiresSee: Wheels and Tires.........................................19Transmission Code Designation...............25Transmission......................................................11TransmissionSee: Transmission..................................................11
U
Under Hood Overview - 2.0LEcoBoost™.....................................................17Using Stability Control..................................13Enhanced Torque Vectoring Control..............14Using Winter Tires..........................................20
W
Warning Lamps and Indicators...................9Gauges........................................................................9Warranty Terms and Conditions..............28Wheels and Tires............................................19Technical Specifications.....................................21Winter TiresSee: Using Winter Tires......................................20
29Focus (CDH), enUSA, First PrintingIndex