2015 FORD FOCUS ELECTRIC Owners Manual

Page 297 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual If your vehicle is equipped with Navigation,
press the I (Information) button. If your
vehicle is not equipped with Navigation,
press the green tab on your touchscreen. To use the touchscreen select:

Page 298 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual Action and Description
Voice Command
category, residential addresses by street
address or by name or specific street inter-
sections. Operator Assist is a feature of your
SYNC Services subscription. F

Page 299 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual SYNC Services Voice Commands
If your vehicle is equipped with
Navigation, SYNC Services
downloads your requested
destination to the navigation system. The
navigation system then calculates the
route a

Page 300 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual Action and Description
Menu Item
Touch these buttons to identify traffic incidents on your route,
nearby your vehicle ’s current location or near any of your
favorite places, if programmed.
Traffic

Page 301 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual This screen displays any system messages
(such as an SD card fault).
Note:
The system alerts you to any
messages by turning the information icon
yellow. After you read or delete the
messages, the icon

Page 302 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual If your vehicle is equipped with
Navigation, touch the I (Information)
button to access these features. If your
vehicle is not equipped with
Navigation, touch the corner of the
touchscreen with the gr

Page 303 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual 911 Assist May Not Work If:
•
Your cellular phone or 911 Assist
hardware sustains damage in a crash.
• The vehicles battery or the SYNC
system has no power.
• The phones(s) previously paired or

Page 304 of 369

FORD FOCUS ELECTRIC 2015 3.G Owners Manual If you want to run a report by using the
touchscreen, select:
Message
Apps
Vehicle Health Report You can also run a vehicle health
report by voice command.
Press the voice button and when
prompted say