FLUID CAPACITIES
SystemsU.S. Metric
Power Electronics Cooling System 3.6Quarts 3.5 Liters
Battery Thermal Management Cooling System 7.0Quarts 6.7 Liters
Single-Speed Transmission 0.8 Quart 750 ml
FLUIDS, LUBES, AND GENUINE PARTS
Component Fluid, Lubricant, or Genuine Part
Coolant
MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile For-mula OAT (Organic Additive Technology) or equivalentmeeting the requirements of Chrysler Material StandardMS.90032.
Brake Master CylinderMOPAR® DOT 3, SAE J1703 should be used.If DOT 3, SAEJ1703 brake fluid is not available, then DOT 4 is acceptable.Use only recommended brake fluids or equivalent.
Refrigerant MOPAR® R134a
Compressor LubricantMOPAR® POE Oil or Equivalent meeting the require-ments of Chrysler Material Standard MS-12727
Single-Speed Transmission Castrol BOT 533
CAUTION!
•Mixing of coolant (antifreeze) other than specified Organic Additive Technology
(OAT) coolant (antifreeze), may result in cooling system damage and may decrease
corrosion protection.Organic Additive Technology (OAT) coolant is different and
should not be mixed with Hybrid Organic Additive Technology (HOAT) coolant
(antifreeze).If a non-OAT coolant (antifreeze) is introduced into the cooling sys-
tem in an emergency, it should be replaced with the specified coolant (antifreeze)
as soon as possible.
•Do not use water alone or alcohol-based coolant (antifreeze) products.Do not
use additional rust inhibitors or antirust products, as they may not be compatible
with the radiator coolant and may plug the radiator.
•This vehicle has not been designed for use with propylene glycol-based coolant
(antifreeze).Use of propylene glycol-based coolant (antifreeze) is not recom-
mended.
MAINTAINING YOUR VEHICLE
78
