2015 DODGE VIPER tires

[x] Cancel search: tires

Page 264 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual Tire Repair
If your tire becomes damaged, it may be repaired if it
meets the following criteria:
•The tire has not been driven on when flat.
•The damage is only on the tread section of your tire
(

Page 265 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual Summer tires do not contain the all season designation or
mountain/snowflake symbol on the tire sidewall. Use
summer tires only in sets of four; failure to do so may
adversely affect the safety and ha

Page 266 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual While studded tires improve performance on ice, skid
and traction capability on wet or dry surfaces may be
poorer than that of non-studded tires. Some states pro-
hibit studded tires; therefore, local

Page 269 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual Tire Spinning
When stuck in mud, sand, snow, or ice conditions, do not
spin your vehicle’s wheels above 30 mph (48 km/h) or
for longer than 30 seconds continuously without stop-
ping.
Refer to “Fr

Page 270 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual These indicators are molded into the bottom of the tread
grooves. They will appear as bands when the tread depth
becomes a 1/16 of an inch (2 mm). When the tread is
worn to the tread wear indicators,

Page 271 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual wear and correct cold tire inflation pressures. The manu-
facturer strongly recommends that you use tires equiva-
lent to the originals in size, quality and performance
when replacement is needed. Ref

Page 272 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual WARNING!(Continued)
•Never use a tire with a smaller load index or
capacity, other than what was originally equipped
on your vehicle. Using a tire with a smaller load
index could result in tire over

Page 273 of 400

DODGE VIPER 2015 VX / 3.G Owners Manual tires. Rotation will increase tread life, help to maintain
mud, snow, and wet traction levels, and contribute to a
smooth, quiet ride.
Refer to the “Maintenance Schedule” for the proper
maintenanc