2015 Citroen DS3 RHD ad blue

49
Touch screen tablet
This system gives access to:
-  m enus   for   adjusting   settings   for   vehicle  
f

unctions   and   systems,
-
 
a
udio   and   display   configuration   menus,
-
 
a
udio   system   and   telephone   controls   and  
t

he   display   of   associated   information,
-
 
t
he   display   of   alert   messages,
-
 
t
he   display   of   ambient   temperature   (a   blue  
s

now   flake   appears   if   there   is   a   risk   of   ice),
-
 
t
he   trip   computer.
And,
  depending   on   equipment,   it   allows:
-
 
t
he   display   of   the   visual   parking   sensors  
i

nformation,
-
 
a
ccess   to   the   controls   for   the   navigation  
s

ystem   and   Internet   services,   and   the  
d

isplay   of   associated   information. After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
As
  a   safety   measure,   some   functions  
c

an   only   be   viewed   when   stationary.  
T

heir   display   is   interrupted   as   soon   as  
t

he   vehicle   moves   off.general operation
Recommendations
It is necessary to press firmly, particularly for "flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  screen   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
Do
  not   touch   the   touch   screen   tablet   with   wet  
han

ds.
Uses a soft clean cloth to clean the touch
screen
 t

ablet.
Principles
Press the " MEn U" button for access to the
different   menus,   then   press   the   virtual   buttons  
i

n   the   touch   screen   tablet.
Each
  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
Use the " OPTIO
nS"

  button   to   go   to   the  
s

econdary
 pag
e.
Use this button for access to
additional
  information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm.
Use this button to return to the
primary
  page   or   to   quit.
Monitoring

The heating / ventilation or air conditioning systems operates with the engine running, as well as in STOP mode with Stop & Start.
1. Temperature adjustment
F Turn  the   dial   from   blue  (
cold)   to   red   (hot)   to   adjust  
t

he   temperature   to   your  
r

equirements.
2. Air flow adjustment
F Turn   the   dial   from   position   1
to position 5 to obtain a
comfortable
  air   flow.
F

I

f you place the air flow control
in position 0
  (deactivation   of   the  
s

ystem),   the   temperature   is   no  
l

onger   maintained   at   a   comfortable  
l

evel.   However,   a   slight   flow   of   air,  
d

ue  
t
o  
t
he  
m
ovement  
o
f  
t
he  
v
ehicle,  
c

an   still   be   felt.
3. Air distribution adjustment
Windscreen and side windows.
W indscreen,   side   windows   and  
f

ootwells.
Footwells.
Central
  and   side   vents.
The
  air   distribution   can   be  
a

dapted   by   placing   the   dial  
i

n   an   intermediate   position.
4. Air intake / Air recirculation
The intake of exterior air avoids the formation of   mist   on   the   windscreen   and   side   windows.
The recirculation of interior air insulates the
passenger
  compartment   from   exterior   odours  
a

nd   smoke.
Return
  to   exterior   air   intake   as   soon   as   possible  
t

o   prevent   deterioration   of   the   air   quality   and  
t

he   formation   of   mist.
Manual control panel F
 
M
ove   the   manual   control   to  
t

he   left   to   be   in   the   "recycling  
i

nterior   air"   position.
F
 
M
ove   the   manual   control   to   the  
r

ight   to   return   to   the   "fresh   air  
i

ntake"   position.

91
It is possible to adjust one or more functions manually   while   leaving   the   other   functions   in  
a

utomatic   mode.
The "AUTO"
 

symbol   switches   off.
To
  return   to   automatic   mode,   press   the   "AUTO"
button.
Manual override
4. Air conditioning on/off
For maximum cooling or heating of the c abin,   it   is   possible   to   go   beyond   the  
m

inimum   14   or   maximum   28   values.
F

P
ress the blue button 2 until "LO"
is
  displayed   or   the   red   button   2
until
"HI"
 
is   displayed. Press this button to switch off the air
conditioning.
Stopping
  the   air   conditioning   may   cause
 s

ome   problems   (humidity,   misting).
5. Air intake / Air recirculation
Press this button for recirculation of
the
  interior   air.   The   air   recirculation  
s

ymbol
 5
  is   displayed.
Avoid
  prolonged   recirculation   of  
i

nterior   air   (risk   of   condensation   or  
d

eterioration   of   the   air   quality).
Switching
 
to
 
manual
 
mode
 
may
 
not
 
be
 
s

uitable
 
(temperature,
 
humidity,
 
odour,
 
c

ondensation)
 
and
 
does
 
not
 
provide
 
o

ptimum
 c

omfort. Automatic
 
operation
 
of
 
the
 
air
 
conditioning
 
is
 
r

esumed
 
when
 
the
 
button
 
is
 
pressed
 
again.
 

The
 
symbol
 
"A /C "
 

is
 
displayed. Air
 
recirculation   enables   the   passenger  
c

ompartment   to   be   isolated   from   exterior  
o

dours
 
and   smoke.
Press
 
this
  button   again   or   press   the   "AUTO"
button
 
to
 
resume   automatic   management   of  
t

he
 
intake
  of   air.   The   air   recirculation   symbol   5
goes
 
off.
Comfort

Reversing camera
The reversing camera cannot in any c
ircumstances   be   a   substitute   for  
v

igilance   on   the   part   of   the   driver.
Clean
  the   reversing   camera   regularly  
u

sing   a   soft,   dry   cloth.
A
 
reversing   camera   is   activated   automatically  
w

hen
 r
everse
 g
ear
 i
s
 enga
ged.
The
 
colour   image   is   provided   in   the   navigation  
sc

reen. The space between the blue lines represents the
width   of   your   vehicle   except   for   the   door   mirrors.
The   blue   lines   represent   the   general   direction  o
f   the   vehicle.
The   red   line   represents   a   distance   of   about  
3

0   cm   beyond   the   edge   of   your   vehicle's  
r

ear   bumper.   The   audible   signal   becomes  
c

ontinuous   from   this   limit.
The
  green   lines   represent   distances   of   about  
1
  and   2   metres   beyond   the   edge   of   your  
v

ehicle's   rear   bumper.

191
Running out of fuel (Diesel)If your vehicle has an HDi engine, the fuel system must be primed if you run out of fuel.
T his   system   consists   of   a   priming   pump   and   a   transparent   pipe   under   the   bonnet.
F
 
F
ill   the   fuel   tank   with   at   least   five   litres   of  
D

iesel.
F
 
O
pen   the   bonnet.
F
 
D
epending   on   version,   unclip   the   cover   to  
g

ain   access   to   the   priming   pump.
F
 
S
queeze   and   release   the   priming   pump  
u

ntil   resistance   is   felt   (could   be   from   the  
f

irst   application)   and   fuel   appears   in   the  
t

ransparent   pipe   with   the   green   connector.
F
 
O
perate   the   starter   until   the   engine   starts.
F
 
D
epending   on   version,   put   the   cover   back  
i

n   position   and   clip   it   in   place.
F
 
C
lose   the   bonnet.
BlueHdi 100 engine
F Fill  the   fuel   tank   with   at   least   five   litres   of  D
iesel.
F
 
S
witch   on   the   ignition   (without   starting   the  
e

ngine).
F
 
W
ait   around   6   seconds   and   switch   off   the  
ig

nition.
F
 
R
epeat   the   operation   10   times.
F
 
O
perate   the   starter   to   run   the   engine.
If
 
the
 
engine
 
does
 
not
 
start
 
at
 
the
 
first
 
a

ttempt,
 
do
 
not
 
try
 
again.
Operate
 
the
 
priming
 
pump
 
again,
 
then
 
t

he
 
starter.
Practical information

AdBlue® additive and SCR system
f
or
 
BlueHDi   Diesel   engines
To assure respect for the environment and c
onformity   with   the   new   Euro   6   emissions  
s

tandard,   without   adversely   affecting   the  
p

er formance   or   fuel   consumption   of   Diesel  
e

ngines,   CITROËN   has   taken   the   decision   to  
e

quip   its   vehicles   with   an   effective   system   that  
a

ssociates   SCR   (Selective   Catalytic   Reduction)  
w

ith   a   particle   filter   (FAP)   for   the   treatment   of  
e

xhaust   gases.
Presentation of the SCR system
Using an additive called AdBlue® containing u
rea, a catalytic converter turns up to
85% of
 
nitrous
 
oxides
 
(NOx)
 
into
  nitrogen  
a

nd
 
water,
 
which
 
are
 
harmless
 
to   health   and  
t

he environment. The
  AdBlue
® additive is held in a special t
ank
 
located
  under   the   boot   at   the   rear   of  
t

he
 
vehicle.
 
It   has   a   capacity   of   17   litres:   this  
p

rovides
 
a
 
driving   range   of   about   12   500   miles  
(

20
 
000
 
km),
  after   which   an   alert   is   triggered  
w

arning
 
you
 
when   the   reserve   remaining   is  
e

nough
 
for
 
just   1   500   miles   (2   400   km).
During
 
each
  scheduled   service   of   your   vehicle  
b

y
 
a
 
CITROËN   dealer   or   a   qualified   workshop,  
t

he
 
AdBlue
® additive tank is refilled in order to a
llow
 
normal   operation   of   the   SCR   system.
If
 
the
 
estimated   mileage   between   two   services  
i

s
 
greater
 
than   12   500   miles   (20   000   km),   we  
r

ecommend
  that   you   go   to   a   CITROËN   dealer  
o

r
 
a
 
qualified   workshop   to   have   the   necessary  
t

op-up
 
carried   out. Once
  the   AdBlue
® tank is empty, a
 
system
 
required
  by   regulations  
p

revents
 
starting
 
of   the   engine.
If the SCR

is faulty, the level of
emissions
 
from
 
your   vehicle   will   no  
l

onger
 
meet
 
the
 
Euro   6   standard:   you  
v

ehicle
 
becomes
 
polluting.
In
 
the
 
event
 
of
 
a
 
confirmed   fault  
w

ith
 
the
 
SCR
 
system,   you   must   go  
t

o
 
a
 
CITROËN
 
dealer   or   a   qualified  
w

orkshop
 
as
 
soon   as   possible:   after  
a

 
running
 
distance   of   650   miles  
(

1 100
 
km),
 
a
 
system   will   be   triggered  
a

utomatically
 
to
 
prevent   engine  
s

tarting.

193
Range indicators
Once the AdBlue® tank is on reserve or after d
etection
 
of
 
a
 
fault   with   the   SCR   emissions  
c

ontrol
 
system,
 
when   the   ignition   is   switched  
o

n,
 
an
 
indicator
 
displays   an   estimate   of   the  
d

istance
 
that
 
can
 
be   covered,   the   range,   before  
e

ngine
 
starting
 
is
 
prevented.
In
 
the
 
event
 
of
 
simultaneous   system   fault   and  
l

ow
 
AdBlue
® level, the shortest range figure is t
he
 
one
 
displayed. The
  engine   start   prevention   system  
r

equired   by   regulations   is   activated  
a

utomatically   once   the   AdBlue
® tank i
s
 
empty.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
When   the   ignition   is   switched   on,   no  
i

nformation   on   range   is   displayed   automatically  
i

n   the   instrument   panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning   lamp   comes   on,   accompanied  
b

y   an   audible   signal   and   the   display   of   a  
m

essage   (e.g.:   "Top   up   emissions   additive:  
S

tarting   prevented   in   900   miles")   indicating  
t

he   remaining   range   expressed   in   miles   or  
k

ilometres.
When
  driving,   the   message   is   displayed   every  
2

00   miles   (300   km)   until   the   additive   tank   has  
be

en
 t
opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Refer
 
to
 
the
 
"Topping-up"
 
section.
Practical information

When switching on the ignition, the SERVICE warning   lamp   comes   on   and   the   UREA   warning  
l

amp   flashes,   accompanied   by   an   audible  
s

ignal   and   the   display   of   a   message   (e.g.   "Top  
u

p   emissions   additive:   Starting   prevented   in  
3

50   miles")   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres.
When
  driving,   the   message   is   displayed   every  
3

0   seconds   until   the   additive   tank   has   been  
t

opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Refer
 
to
 
the
 
"Topping-up"
 
section.
Other wise you will not be able to restart your
engine.
Remaining range between 0 and 350 miles (0 and 600 km)
When switching on the ignition, the SERVICE w arning   lamp   comes   on   and   the   UREA   warning  
l

amp   flashes,   accompanied   by   an   audible  
s

ignal   and   the   display   of   the   message   "Top   up  
e

missions   additive:   Starting   prevented".
The
 Ad

Blue
® tank is  empty:  t he  s ystem  r equired  b
y
 
regulations   prevents   engine   starting.
Breakdown related to a lack of AdBlue® additive
To be able to start the engine, w
e   recommend   that   you   call   on  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop   for   the   top-up   required.   If  
y

ou   carry   out   the   top-up   yourself,   it   is  
e

ssential   to   add   at   least   3.8   litres   of  
Ad

Blue
® to the tank.
R
efer
 
to
  the   "Topping-up"   section.