2015 Citroen DS3 ESP

65
DS3_en_Chap02_ouvertures_ed01-2015
In the event of unwanted opening of the window   on   closing   (for   example   in   the  
p

resence   of   frost):
F

p
ress the switch beyond the point
of
  resistance   and   release   it;   the  
w

indow   opens   completely,
F
 
t
hen   immediately   pull   the   switch  
w

ithout   going   beyond   the   point   of  
r

esistance until the window closes
fully,
F

c
ontinue to hold the switch for
approximately
  one   second   after   the  
w

indow   has   closed.
The safety anti-pinch function is not
active during these operations.
Safety anti-pinch
On the  driver's  s ide,  t he  o ne-touch  f ront  e lectric  w
indow   has   a   safety   anti-pinch   function.
When
  the   window   rises   and   meets   an   obstacle,  
i

t   stops   and   partially   lowers   again.
Reinitialisation
Always remove t he  k ey  f rom  t he  i gnition  w
hen   leaving   the   vehicle,   even   for   a  
s

hort   time.
In
  the   event   of   contact   during   operation  
o

f   the   windows,   reverse   the   movement  
o

f   the   window.   To   do   this,   press   the  
c

orresponding
 s
witch.
When the driver operates the
passenger
  electric   window   switch,   they  
s

hould   ensure   that   no   one   is   preventing  
c

orrect   closing   of   the   window.
Be particularly aware of children when
operating
 t

he
 w
indows.
In
 
the
 
event
 
of
 
a
 
malfunction
 
you
 
have
 
to
 r
einitialise the operation of the electric
windows:
F
 
r

elease
 
the
 
switch
 
and
 
pull
 
it
 
again
 
until
 
the
 
w

indow
 
closes
 
completely,
F
 
h

old
 
the
 
switch
 
for
 
approximately
 
o

ne second
 
after
 
closing,
F

p

ress the switch to lower the window
automatically.
The safety anti-pinch function is not active
during these operations.
Access

77
DS3_en_Chap03_confort_ed01-2015
Rear seatsBench seat with fixed one-piece cushion and 1/3 - 2/3 split folding backrest to vary the load space in the boot.
F  
M
ove   the   corresponding   front   seat   for ward  
i

f   necessary.
F
 
C
heck   that   the   seat   belt   is   positioned  
c

orrectly   on   the   side   of   the   seat   backrest.
F

P
lace the head restraints in the low
position.
Folding the backrest
F Pull control 1 for wards to release the seat backrest 2.
F
 
F
old   the   seat   backrest   2   on   to   the   cushion.F
 
S
traighten   the   seat   backrest   2
 
and   secure   it.
F  
C
heck  
t
hat  
t
he  
r
ed  
i
ndicator,  
l
ocated  
n
ext  
t
o  
t

he control 1
,   is   no   longer   visible.
Repositioning the seat backrest
When repositioning the seat backrest, t
ake   care   not   to   trap   the   seat   belts.
Comfort

79
DS3_en_Chap03_confort_ed01-2015
Mirrors
Each fitted with an adjustable mirror glass permitting t he la teral r earward v ision n ecessary f

or   overtaking   or   parking.   They   can   also   be  
f

olded   for   parking   in   confined   spaces.
demisting - def rosting Adjustment
F Move control A
  to   the   right   or   to   the   left   to  s
elect   the   corresponding   mirror.
F

M
ove control B in all four directions to
adjust.
F

R
eturn control A   to   the   central   position.
door mirrors
The objects observed are, in reality, closer   than   they   appear.
Take
  this   into   account   in   order   to  
c

orrectly   judge   the   distance   of   vehicles  
a

pproaching   from   behind.
Folding
F From  outside:   lock   the   vehicle   using   the  r
emote   control   or   the   key.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
Unfolding
F From  outside:   unlock   the   vehicle   using   the  r
emote   control   or   the   key.
F
 
F
rom   inside:   with   the   ignition   on,   pull   the  
c

ontrol A   in   the   central   position   rear wards.
If
 
t
he  
m
irrors  
a
re  
f
olded  
u
sing  
c
ontrol 
A,
they will not unfold when the vehicle is
unlocked.   Pull   again   on   control   A
.
The   folding   and   unfolding   of   the   door  
m

irrors   using   the   remote   control   can   be  
d

eactivated by a CITROËN dealer or a
qualified
 w

orkshop.
If
  necessary   the   mirrors   can   be   folded  
m

anually.
If your vehicle is fitted with heated
mirrors,
 
the
 
demisting-defrosting
 
o

perates
 
by
 
switching
 
on
 
the
 
heated
 
re

ar
 sc

reen.
Refer
 
to
 
the
 
"Rear
 
screen
 
demist-defrost"
 
s

ection.
Comfort

DS3_en_Chap03_confort_ed01-2015
Digital air conditioningThe air conditioning operates when the engine is running, as well as in STOP mode with Stop & Start.
Automatic operation
1. Automatic "comfort" programme
Press the "AUTO"  button.  T
he "AUTO"  symbol   is   displayed. For
  your   comfort,   when   the   engine   is  
s

witched   off,   the   settings   are   retained  
u

ntil   the   engine   is   switched   on   again.
To   prevent   too   great   a   distribution   of  
c

old   air   when   the   engine   is   cold,   the   air  
f

low   will   only   reach   its   optimum   level  
g

radually.
2. Temperature adjustment
The value indicated on the display corresponds
to
  a   level   of   comfort   and   not   to   a   temperature   in  
d

egrees   Celsius   or   Fahrenheit. On
  entering   the   vehicle,   if   the   interior  
i

s very cold or hot, there is no need to
change   the   value   displayed   in   order  
t

o   reach   the   required   level   of   comfort.  
T

he   system   corrects   the   temperature  
d

ifference   automatically   and   as   quickly  
a

s   possible.
Press the " 5" and " 6" buttons to
change
  this   value.   A   setting   around  
t

he value 21
 
enables   optimum  
c

omfort   to   be   obtained.   However,  
d

epending   on   your   requirements,   a  
s

etting   between   18   and   24   is   usual.
3. Automatic "visibility" programme
The automatic comfort programme m
ay   not   be   sufficient   for   rapid  
d

emisting   or   defrosting   of   the  
w

indscreen and side windows
(humidity,
  several   passengers,   ice,  
e

t c .) .
With
  Stop   &   Start,   when   demisting   has  
b

een   activated,   the   STOP   mode   is   not  
a

vailable.
In
 
this
 
case,   select   the   automatic   visibility  
p

rogramme.   The   button   3   indicator   lamp  
comes
 
on.
The
 
system   automatically   controls   the   air  
c

onditioning   and   the   flow   of   air   and   provides  
o

ptimum
 
air   distribution   to   the   windscreen   and  
s

ide
 
windows.   It   deactivates   air   recirculation   5.
To
 
exit
 
this   programme,   press   button   3   again  
or "AUTO" ,
  the   indicator   lamp   on   the   button  
g

oes
 
off
 
and   "AUTO"
 
is   displayed.
We
 
recommend
 
that
 
you
 
use
 
this
 
mode.
 
I

t
 
provides
 
optimised
 
automatic
 
control
 
of
 
a

ll
 
of
 
the
 
following
 
functions:
 
passenger
 
c

ompartment
 
temperature,
 
air
 
flow,
 
air
 
d

istribution
 
and
 
air
 
intake,
 
in
 
accordance
 
with
 
t

he
 
comfort
 
value
 
that
 
you
 
have
 
chosen.
This
 
system
 
is
 
designed
 
to
 
operate
 
effectively
 
i

n
 
all
 
seasons,
 
with
 
the
 
windows
 
closed.

DS3_en_Chap04_conduite_ed01-2015
When you move the selector in the gate to select   a   position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.
R

everse
n. N

eutral
d

.
 D
rive   (Automatic   driving)
S.
Sport
 pro
gramme
T .
Snow
 pro
gramme
1 2 3 4.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
displays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
Moving off
If position n is selected inadvertently
w hile   driving,   allow   the   engine   to  
r

eturn to idle then select position d to
accelerate.
If
  the   ambient   temperature   is  
b

elow -23°C,   the   engine   should   be   left  
a

t   idle   for   four   minutes,   to   ensure   the  
c

orrect   operation   and   life   of   the   engine  
an

d
 g
earbox. When
  the   engine   is   running   at   idle,   with  
t

he   brakes   released,   if   position   R
, d or
M   is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When   the   engine   is   running,   never  
l

eave children in the vehicle without
supervision.
When   carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P
.
F
 
A

pply   the   parking   brake.
F

Sel
ect position P or n
.
F

 
S

tart   the   engine.
If this procedure is not followed, there is an
audible   signal,   accompanied   by   the   display   of  
a

n
 
warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R

elease   the   parking   brake.
F

Sel
ect position R
, d or M
.
F
 
G

radually   release   the   brake   pedal.
The
 
vehicle   moves   off   immediately.

11 5
DS3_en_Chap04_conduite_ed01-2015
Gear shift indicatorSystem which reduces fuel consumption by advising the driver to change up.
Operation
Example:
- Y ou   are   in   third   gear.
-
 
Y
ou   press   the   accelerator   pedal.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
The
  information   appears   in   the   instrument  
p

anel   in   the   form   of   an   arrow. The
  system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (slope,   load, ...)   and  
t

he   demands   of   the   driver   (power,  
a

cceleration,   braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear,
-
 
e
ngaging   a   lower   gear.
With
 
an
 
electronic
 
or
 
automatic
 
g

earbox,
 
the
 
system
 
is
 
only
 
active
 
in
 
m

anual
 m

ode.
On  vehicle   fitted   with   a   manual  
g

earbox,   the   arrow   may   be  
a

ccompanied   by   the   gear  
re

commended.
Depending
 
on
 
the
 
driving
 
situation
 
and
 
your
 v
ehicle's
 
equipment,
 
the
 
system
 
may
 
advise
 
y

ou
 
to
 
skip
 
one
 
(or
 
more)
 
gear(s).
 
You
 
can
 
f

ollow
 
this
 
instruction
 
without
 
engaging
 
the
 
i

ntermediate
 g

ears.
The
 
gear
 
engagement
 
recommendations
 
must
 
n

ot
 
be
 
considered
 
compulsory.
 
In
 
fact,
 
the
 
c

onfiguration
 
of
 
the
 
road,
 
the
 
amount
 
of
 
traffic
 
a

nd
 
safety
 
remain
 
determining
 
factors
 
when
 
c

hoosing
 
the
 
best
 
gear.
 
Therefore,
 
the
 
driver
 
r

emains
 
responsible
 
for
 
deciding
 
whether
 
or
 
not
 
t

o
 
follow
 
the
 
advice
 
given
 
by
 
the
 
system.
This
 
function
 
cannot
 
be
 
deactivated.
driving

DS3_en_Chap04_conduite_ed01-2015
System which prevents the vehicle from exceeding   the   speed   programmed   by   the  
d

river.
When
  the   programmed   speed   limit   is   reached,  
p

ressing   the   accelerator   pedal   in   the   normal  
m

anner   no   longer   has   any   effect.
The
  speed   limiter   is   switched on
 m
anually:
 it r

equires   a   programmed   speed   of   at   least  
20
  mph   (30   km/h).
The
  speed   limiter   is   switched off
 
by   manual  
o

peration   of   the   control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly.
To
  return   to   the   programmed   speed,   simply  
s

low   down   to   a   speed   below   the   programmed  
s

peed.
The
 
p
rogrammed  
s
peed  
r
emains  
i
n  
t
he  
m
emory  
w

hen   the   ignition   is   switched   off.
Speed limiter
The speed limiter cannot, in any circumstances,   replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A
.
1.
 S
peed   limiter   mode   selection   thumb   wheel.
2.
 V
alue   decrease   button.
3.
 V
alue   increase   button.
4.
 S
peed   limiter   on   /   off   button.
Steering mounted controls
The programmed information is grouped t
ogether   in   the   instrument   panel   screen.
5.
 S

peed   limiter   on   /   off   indication.
6.
 S

peed   limiter   mode   selection   indication.
7.
 P

rogrammed   speed   value.
displays in the instrument panel

DS3_en_Chap04_conduite_ed01-2015
Cruise control
System which automatically maintains the speed   of   the   vehicle   at   the   value   programmed  
b

y the driver, without any action on the
accelerator
 ped

al.
The cruise control is switched on
 m

anually:
 it r

equires   a   minimum   vehicle   speed   of   25   mph  
(

40   km/h),   as   well   as   the   engagement   of:
-
 
f
ourth   gear   on   a   manual   gearbox,
-
 
s
econd   gear   on   a   or   automatic   or   electronic  
g

earbox,   in   sequential   mode,
-
position A
  on   an   electronic   gearbox   or  
p

osition d  on   an   automatic   gearbox.
The cruise control is switched off
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal   or   on  
t

riggering   of   the   trajectory   control   systems   for  
s

afety   reasons.
It
  is   possible   to   exceed   the   programmed   speed  
t

emporarily   by   pressing   the   accelerator   pedal.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal.
Switching
  off   the   ignition   cancels   any  
p

rogrammed   speed   value. The
  controls   of   this   system   are   grouped  
t

ogether   on   stalk   A.
1.
 C

ruise   control   mode   selection   thumb   wheel.
2.
 V

alue   decrease   button.
3.
 V

alue   increase   button.
4.
 C

ruise   control   off/resume   button.Steering mounted controls
The cruise control cannot, in any
circumstances,  replace   the   need   to r

espect   speed   limits,   nor   can   it   replace   the
 n

eed   for   vigilance   on   the   part   of   the   driver.The
  programmed   information   is   grouped  
t

ogether   in   the   instrument   panel   screen.
5.
  C
ruise   control   off/resume   indication.
6.
  C
ruise   control   mode   selection   indication.
7.
  P
rogrammed   speed   value.
displays in the instrument panel