2015 CITROEN DS3 CABRIO ad blue

273
* The maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).
* *   For   Belgium.
Diesel engines
diesel engine BlueH d i 100BlueH d i 120
BlueH d i 115**
Gearbox Manual
(5-speed) Manual
(6-speed)
Model code:
SA... BHY0/SBHZ8/S
-**
Cubic
  capacity   (cc) 1 5601 560
Bore
  x   stroke   (mm) 75
  x   88.375
  x   88.3
Max
  power:   EU   standard   (kW)* 73 88
Max
  power   engine   speed   (rpm) 3 500 3 500
Max
  torque:   EU   standard   (Nm) 254 300
Max
  torque   engine   speed   (rpm) 1
  7501
  750
Fuel
die

sel
die
sel
Catalytic converter Ye sYe s
Particle
  filter   (FAP) Ye sYe s
Engine
  oil   capacity   (in   litres)   (with   filter  
r

eplacement) 3.75
3.75
Technical data

275
*  The  weight   of   the   braked   trailer   can   be   increased,   within   the   GTW   limit,   if   the   GV W   of   the   towing   vehicle   is   reduced   by   an   equal   amount.   Warning:  t
owing   using   a   lightly   loaded   towing   vehicle   may   have   an   adverse   effect   on   its   road   holding.
**
  For   Belgium.
Diesel weights and towed loads (in kg)
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each   additional   1   000   metres   of   altitude.
The
  speed   of   a   towing   vehicle   must   not   exceed   60   mph   (100   km/h)   (comply   with   the   legislation   in   force   in   your   country).
High
  ambient   temperatures   may   result   in   a   reduction   in   the   per formance   of   the   vehicle   to   protect   the   engine;   if   the   ambient   temperature   is   above   37   °C,  
l

imit   the   towed   load.
di
esel engine
BlueH d i 100
BlueH d i 120
BlueH d i 115**
Gearbox Manual
(5-speed) Manual
(6-speed)
Model code:
SA... BHY0/SBHZ8/S
-**
-  
U
nladen   weight
1 0851 150
-  
K
erb   weight
1 1601 225
-  
G
ross   vehicle   weight   (GV W)
1 633 1 653
-  
G
ross   train   weight   (GTW)  
 
o
n   a   12%   gradient
2 533
2 553
-  
B
raked   trailer   (within   GTW   limit)
 o

n   a   12%   gradient
900
900
-  
B
raked   trailer*   (with   load   transfer   with   the  
G

TW   limit)
1 150
1 150
-  
U
nbraked   trailer
570570
-  
R
ecommended   nose   weight
46 46
Technical data

Audio and telematics
This section covers emergency and assistance calls, as well as the f
unctions   of   the   audio-navigation   units,   such   as   MP3 -compatible   player,  
U

SB   player,   Bluetooth   system,   the   eMyWay   with   16/9   colour   screen,  
a

uxiliary   inputs,   Hi-Fi   audio   system.

285
The
 
system
 
is
 
protected
 
in
 
such
 
a
 
way
 
that
 
it
 
will
 
only
 
operate

 
in
 
your
 
vehicle.
eMyWay
01 First steps - Control panel
For safety reasons, the driver must only carry out operations
  which   require   prolonged   attention   while   the  
vehicle

  is   stationary.
When
  the   engine   is   switched   off   and   to   prevent  
discharging

  of   the   battery,   the   system   switches   off  
following

  the   activation   of   the   energy   economy   mode.
CONTENTS
02
Steering mounted
controls
03

General operation
04


Navigation
- Guidance
05

T
raffic information
06

Using
the telephone
07
Radio
08

Music media players
09


Audio
settings
10
Configuration
11

Screen menu
map p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
286
288
289
291
304
307
317
320
326
327
328
SATELLITE NAVIGATION SYSTEM
MULTIME
d IA BLUETOOTH
TELEPHONE AU
d IO SYSTEM
Frequently asked questions p.
332

05
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road
  closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
d

elay
n

o entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

RA d IO   to   display   the   menu.
Select "Service announcements" then
confirm.
Activate
  or   deactivate   "TA"
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.
TRAFFIC INFORMATION

06
307
Access to the "TELEPHONE" menu
"Telephone"" d ial"
"
d irectory of contacts"
"Contacts management "
"Phone functions "
"Bluetooth functions "
"Hang up "
Go
  from   the   list   to   the   menu   (left/right).
or
List
 
of
 
recent
 
calls
 
sent
 
and  
received

 
with
 
the
 
telephone  
connected

 
to
 
the
 
system.
Press
 
this
 
button.
To
 
make
 
a
 
call,
 
select
 
a
 
number
 
in
 
the
 
list
 
and
 
confirm
 
" OK"
to
 
start
 
the
 
call.
Connecting
 
a
 
different
 
telephone
 
deletes
 
the
 
list
 
of
 
recent

 
calls. No
  telephone   connected.
Telephone
  connected.
Incoming
  call.
Outgoing
  call.
Synchronisation of
contacts
  in   progress.
Telephone call in
progress.
In the top bar of the permanent
display
USING THE TELEPHONE

06USING THE TELEPHONE
Pairing a Bluetooth telephone
First connectionFor reasons of safety and because they require prolonged attention on  the   part   of   the   driver,   the   operations   for   pairing   the   Bluetooth  
mobile

  telephone   to   the   hands-free   system   of   the   audio   unit   must   be  
carried

  out   with   the  
vehicle stationary
.
In
 
the
 
Bluetooth
 
menu
 
of
 
your
 
telephone,
 
select
 
the
 
name

 
"C
ITR
o
Ë
n"
 
from
 
the
 
list
 
of
 
devices
 
detected. Press
  this   button.
Select "Bluetooth functions "
  and  
confirm.
Select "

Peripherals search "
  and  
confirm.
The

  list   of   peripheral   devices   detected  
is

  displayed.   Wait   until   the   "Connect"
button
  is   available.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone
 

at

 
www.citroen.co.uk
 
(services).
a

ctivate the telephone's b luetooth function
and
  ensure   that   it   is   "visible   to   all"   (telephone  
configuration).
Quick procedure from the telephone
Enter

 
a
 
minimum
 
4
 
figure
 
code
 
in
 
the
 
telephone
 
and
 
confirm. Enter

 
the
 
same
 
code
 
in
 
the
 
system,
 
select "

OK"
 
and
 
confirm. Procedure from the system

06
309
USING THE TELEPHONE
Select "Connect" and confirm.
The   system   offers   to   connect   the  
telephone:
-

 
in
  "Hands-free mode"   (telephone  
only),
-

 
in
  "Audio"   mode   (streaming:   playing  
music

  files   on   the   telephone),
-
 
or
  "All"   (for   selection   of   both  
modes).
Select "

OK"   and   confirm. Then
  accept   automatic   connection   on   the   telephone   to   allow   the  
telephone

  to   reconnect   automatically   every   time   the   vehicle   is  
started.
The

 
ability   of   the   system   to   connect   in   only   one   mode   depends   on  
the

 
telephone.  
The
  two   modes   may   both   connect   by   default.
The "Hands-free mode"
  should   be   used   in   preference   if  
"Streaming"

  is   not   desired.
The
 
services   available   depend   on   the   network,   the   SIM   card   and   the   compatibility   of   the   Bluetooth   telephone   used.   Check   the   telephone  
manual

 
and   with   your   network   provider   for   details   of   the   services   available   to   you.
Depending   on   the   type   of   telephone,   the   system   will   ask   you   to  
accept

  or   not   the   transfer   of   your   contacts.
On
  return   to   the   vehicle,the   last   telephone   connected  
automatically

  reconnects,   within   around   30   seconds   after  
switching

  on   the   ignition   (Bluetooth   activated   and   visible).
To
  modify   the   automatic   connection   mode,   remove   the   pairing  
and

  pair   the   telephone   again   with   the   desired   mode.
Enter
  a   minimum   4   figure   code   in   the   telephone  
and

  confirm.
Enter   the   same   code   in   the   system,  
select "

OK"   and   confirm.
Select
  the   name   of   the   desired  
peripheral

  from   the   list   of   devices  
detected

  then   confirm