2015 CITROEN DS3 CABRIO fold seats

Access to the rear seats
F Pull  the   control   upwards   to   fold   the   seat  b
ack   and   move   the   seat   for ward. No
  person   or   object   should   prevent   the  s
eat   slide   from   returning   to   its   initial  
p

osition;   the   return   to   this   position   is  
n

ecessary
 fo
r
 l
ongitudinal
 l
ocking.
Check
  that   the   seat   belt   has   reeled   in  
c

orrectly   so   as   to   not   impede   access   to  
t

he   rear   seats   for   passengers.
Grab handle
This easy to use handle, located at the top of the   side   trim:
-
 
p
rovides   a   means   of   support   for   the   outer  
r

ear
 p
assengers
 w
hen
 m
oving,
-
 
p
rovides   a   hand   hold   to   ease   access   to   the  
r

ear seats,
-
 
f
acilitates   exit   from   the   rear   seats.
If
 
any
 
difficulty
 
is
 
encountered,
 
s

imultaneously
 p

ush
 r

earwards
 t

he
 s

eat
 
backrest
 
angle
 
control
 
lever
 
(

located
 
at
 
the
 
bottom
 
of
 
the
 
backrest)
 
a

nd
 
the
 
backrest.
Ensure that you use only the
appropriate
 
control
 
lever,
 
located
 
at
 
the
 
t

op
 
of
 
the
 
backrest. F

T

o return the seat to its initial position, push
the
 
backrest
 
rear wards.

Additional adjustments
Access to rear seats
F Pull  the   handle   for wards   to   fold   the   seat  b
ackrest   and   move   the   seat   for wards.
 O

n   repositioning,   the   seat   returns   to   its  
in

itial
 p
osition.
Grab handle
This ergonomic grab handle, located at the top of   the   side   trim,   serves:
-
 
a
s   a   handle   to   steady   rear   passengers  
w

hen
 d
riving,
-
 
a
s   a   grip   to   improve   access   to   the   rear  
sea

ts,
-
 
t
o   facilitate   exit   from   the   rear   seats.
No
 
person
 
or
 
object
 
must
 
prevent
 
the
 
s

eat
 
slide
 
from
 
returning
 
to
 
its
 
initial
 
p

osition;
 
return
 
to
 
this
 
position
 
is
 
n

ecessary
 
for
 
the
 
seat
 
to
 
lock
 
in
 
place.
Ensure that the seat belt reels in
correctly
 
to
 
avoid
 
hindering
 
access
 
for
 
t

he
 
passengers
 
to
 
the
 
rear
 
seats.

83
Rear seatsBench seat with fixed one-piece cushion and 1/3 - 2/3 split folding backrest to adapt the load space in the boot.
F  
M
ove   the   corresponding   front   seat   for ward  
i

f   necessary.
F
 
C
heck   that   the   seat   belt   is   positioned  
c

orrectly   on   the   side   of   the   seat   backrest.
F
 
P
lace   the   head   restraints   in   the   low   position.
Folding the backrest
F Pull control 1  for wards   to   release   the   seat  b
ackrest 2.
F
 
F
old   the   seat   backrest   2   on   to   the   cushion.F
 
S
traighten   the   seat   backrest   2
 
and   secure   it.
F  
C
heck  
t
hat  
t
he  
r
ed  
i
ndicator,  
l
ocated  
n
ext  
t
o  
t

he control 1
,   is   no   longer   visible.
Repositioning the seat backrest
When repositioning the seat backrest, t
ake   care   not   to   trap   the   seat   belts.
Comfort

15Practical information
Changing a fuse
 To unclip the upper boot trim, pull it down, starting on the left.  Remove the trim by tipping it downwards.  Change the fuses. To reassemble, carry out these operations in reverse order, starting at the back of the boot.
Fuse under the bonnet
(maxi-fuse)
Fuse N°RatingFunctions
-20 A Soft top roof
-20 A Soft top roof
If the roof is in zone B when a fuse fails, it is then not possible to open the boot. To be able to open the boot and proceed with fuse replacement, first close the roof manually from inside the boot (by folding the rear seats).
There are three fuses for the soft top roof.
Fuses under the rear shelf
Fuse N°RatingFunctions
MF0840 A Soft top roof
The maxi-fuses provide additional protection for the electrical systems. All work on the maxi-fuses must be carried out by a CITROËN dealer or a qualified workshop.