2015 Citroen C5 ECU

20
C5_en_Chap01_controle-de-marche_ed01-2014
Return to the main
instrument panel screen
display
Successive rotations of the left-hand thumb
wheel on the steering wheel allow you to return
to the main instrument panel screen display
(vehicle speed), via the navigation information
screen, then the screen displaying only the
total mileage and the trip mileage (bottom of
screen).You can display navigation information in the
instrument panel screen by rotating the left-
hand thumb wheel on the steering wheel.This function allows you to display the log of
alerts.
F

P
ress on button A.
The following messages appear consecutively
on the instrument panel screen:
-

R
eminder of the state of the tyre pressures.
-

S
ervice indicator reminder.
-

D
isplay of message alerts.
-

O
il level check.
Check function
Display of navigation
information on instrument
panel screen
Monitoring

61
C5_en_Chap03_ergo-et-confort_ed01-2014
Storing driving positions
System which stores the settings of the driver's
seat. Up to two positions can be stored using
the buttons on the side of the driver's seat.
When storing a driving position, the air
conditioning settings are also memorised.
Storing a position
Using buttons M / 1 / 2
F Switch on the ignition.
F A djust your seat.
F

P
ress button M , then press button 1 or 2
within four seconds.
A

n audible signal confirms that the settings
have been stored.
Storing a new position cancels the previous
position.
Welcome function
The welcome function assists entry and leaving
the vehicle.
After switching off the ignition and opening
the driver’s door, the seat moves back
automatically and then stays in this position,
ready for the next entry to the vehicle.
When switching on the ignition, the seat moves
for ward to the memorised driving position.
When moving the seat, take care that no
person or object hinders the automatic
movement of the seat.
This function is deactivated by default. You may
activate or deactivate this function using the
"Main Menu" on the instrument panel screen.
To do so, select " Vehicle parameters/Comfort /
Driver welcome".
To adjust the air conditioning, refer to
the "Air conditioning" section.For your safety, avoid storing a driving
position while driving.
Recalling a stored position
Ignition on or engine running
F briefly press button 1 or 2 to recall the
corresponding position.
A

n audible signal indicates the end of the
adjustment.
When the ignition is on, after a few consecutive
position recalls, the function will be deactivated
until the engine is started, to prevent
discharging of the battery.
3
Ease of use and comfort

65
C5_en_Chap03_ergo-et-confort_ed01-2014
Rear seats
Bench seat, the left-hand (2/3) or right-hand (1/3) section of which can be folded to adapt the boot load space.
F
M
ove the corresponding front seat for ward
if necessary.
F

R
aise the front of the seat cushion 1 .
F

T
ilt the seat cushion 1 fully against the front
seat.
F

R
emove the seat cushion 1 from its fixings
by pulling upwards.
Refitting the seat cushion
F Position the seat cushion 1 vertically in its fixings.
F

F
old down the seat cushion 1 .
F

P
ress on the seat cushion to secure it.
Removing the seat cushion
3
Ease of use and comfort

66
C5_en_Chap03_ergo-et-confort_ed01-2014
Rear head restraints
The rear head restraints can be removed and
have two positions:
-
h
igh, position for use,
-

l
ow, storage position.
To raise a head restraint, pull it upwards.
To lower it, press the lug then the head
restraint.
To remove it, place it in the high position, push
the lug and pull it upwards.
To refit it, engage the head restraint rods in the
holes taking care to remain in line with the seat
back.
Never drive with the head restraints
removed, they must be in place and
correctly adjusted.
Returning the seat backrest
to its original position
When returning the rear seat to its original position:
F put the seat backrest 2 in the upright position and
secure it,
F fold the seat cushion 1 ,
F
refit the head restraints or put them back in place.When returning the rear seat to its original
position, take care not to trap the seat belts and
ensure that their buckles are positioned correctly.
The red indicator on the control 3 should no
longer be visible; if it is, push the seat fully
back.
Folding the seat
In order to fold a rear seat without any risk of
damage, always start with the seat cushion,
never with the seat backrest:
F

m
ove the corresponding front seat for ward
if necessary,
F

r
aise the front of the seat cushion 1 ,
F

t
ilt the seat cushion 1 fully against the front
seat,
F

c
heck that the seat belt is positioned
correctly on the side of the seat backrest,
F

l
ower or remove the head restraints if
necessary,
F

p
ull the control 3 for ward to release the
seat backrest 2 ,
F

t
ilt the seat backrest 2 .
The seat cushion 1 can be removed to increase
the load volume.
Ease of use and comfort

90
C5_en_Chap03_ergo-et-confort_ed01-2014
Side blinds
F Pull on the tab A and position the blind on the hook B .
Rear blind (Saloon)
F Pull on the tab C to unreel the blind,
F
p osition the blind on the hooks D .
Ski flap
A flap in the backrest, located to the rear of the
armrest, facilitates the carrying of long objects.
To o p e n
F Lower the rear armrest.
F
P ull the flap handle down.
F

L
ower the flap.
F

L
oad the objects from inside the boot.
Ensure that the objects are well secured
and that they do not impede the
operation of the gear lever.
Ease of use and comfort

91
C5_en_Chap03_ergo-et-confort_ed01-2014
Boot fittings (Saloon)
1. Boot floor (spare wheel storage).2. B oot lamp.
3. L ocation for 6 CD changer.
Luggage securing rings
F Use the 4 securing rings on the boot floor to secure your luggage.
For safety reasons in the event of sharp
braking, you are advised to place heavy objects
as far for ward in the boot as possible.
3
Ease of use and comfort

92
C5_en_Chap03_ergo-et-confort_ed01-2014
Boot fittings (Tourer)
1. Hook
F or shopping bags.
2.
T

o r c h
T

o recharge, return it to its storage
position.
3.
Sto

rage net 1. L
uggage-cover blind
(
see details on following page)
2.
L

uggage securing rings
U

se the 4 stowing rings provided on the
boot floor to secure your loads.
F

or safety reasons in the event of sharp
braking, you are advised to place heavy
objects as far for wards as possible.
3.
Hoo

ks
T

hese allow a cargo net to be fitted (see
details on following page). 1. B
oot lamp
2. 1 2 V accessories socket
(100 W maximum)
C

igarette lighter type 12 volt socket. It is
located on the rear right-hand trim.
3.
L

oading height control
Y

ou can change the height of the vehicle to
make loading or unloading easier.
4.
Hoo

k
F

or shopping bags.
5.
Sto

rage net or closed housing
L

ocation for the 6 CD changer.
Ease of use and comfort

93
C5_en_Chap03_ergo-et-confort_ed01-2014
Luggage cover (Tourer)
To reel in
F Press the handle (PRESS) gently. The luggage cover reels in automatically.
The moving part A
can be folded along the rear
bench seat backrest.
To remove
F Compress the control 1 and lift the luggage cover on the right then on the left to
remove it.
To install
F Position the left-hand end of the luggage cover roller in its location B behind the rear
bench seat.
F

C
ompress the roller control 1 and put the
roller in place in its location C on the right.
F

R
elease the control to secure the luggage
c ove r.
F

U
nreel it to its fastening on the rear pillar.
3
Ease of use and comfort