Page 272 of 420
270
Dipped beam headlamps
(halogen model)
F Remove the protective plastic cover by p
ulling the tab.
F
P
ush the connector.
F
R
emove the bulb and change it.
For
reassembly, carry out these operations in
r
everse
o
rder.
Main beam headlamps
(halogen model)
F Turn the protective plastic cover to remove it.
F
D
isconnect the connector.
F
R
elease the clips.
F
R
emove the bulb and change it.
For
reassembly, carry out these operations in
r
everse
o
rder.
Daytime running lamps / sidelamps
For the replacement of this type of LED lamp and lighting guides, contact a CITROËN dealer
o
r a qualified workshop.
A
replacement kit for the LEDs is available from
C
ITROËN dealers.
Practical information
Page 273 of 420
271
The direction indicator bulb is located below the front lamp.
F
T
urn the bulb holder a quarter turn anti-
clockwise.
F
R
emove the bulb holder.
F
C
hange the failed bulb.
For
reassembly, carry out these operations in
r
everse
o
rder.
Direction indicators Front foglamps
F Unclip the finisher by pulling at the top.
F R emove the two screws to remove the unit.
F
T
urn the bulb holder a quarter turn.
F
R
emove the bulb holder.
F
C
hange the failed bulb.
For
reassembly, carry out these operations in
r
everse order, pressing on the finisher to refit it.
Faster
flashing
of
a
direction
indicator
w
arning
lamp
(left
or
right)
indicates
a
f
ailed
bulb
on
that
side.
Direction indicators (light
emitting diodes - LED)
For the replacement of this type of lamp, c ontact a CITROËN dealer or a qualified
w
orkshop.
7
Practical information
Page 274 of 420
272
You should contact a CITROËN dealer or a qualified workshop for the replacement of the
l
ight emitting diode - LED.
Door mirror spotlamps
Integrated direction indicator
side repeaters
You should contact a CITROËN dealer or a qualified workshop for the replacement of these
b
ulbs. 1.
D
irection indicator (PY21W amber).
2.
S
idelamp / foglamp (P21/5W).
Rear lamps
Light emitting diodes-LEDs
For replacement, contact a CITROËN d
ealer or qualified workshop.
3.
B
rake
lamp
/
sidelamp
(light
emitting
d
iodes-LED).
4.
R
eversing
lamp
(W16W).
5.
D
irection
indicator
(PY21W).Model with LED lamps
3. Brake lamp / sidelamp (P21/5W).
4. R eversing lamp (W16W).
5.
D
irection indicator (PY21W).
Model with conventional bulb lamps
Practical information
Page 276 of 420
274
1. Direction indicator (PY21W amber).
2. S idelamp / foglamp (P21/5W).
Rear lamps
3. Sidelamp (light emitting diodes-LED).
4. B rake lamp (light emitting diodes-LED).
5.
D
irection indicator (PY21W).
6.
R
eversing lamp (light emitting
diodes-LED).
Model with LED lamps
3. Sidelamp (P21/5W).
4. B rake lamp / sidelamp (P21/5W).
5.
D
irection indicator (PY21W).
6.
R
eversing lamp (P21W).
Model with conventional bulb lamps
Light emitting diodes-LEDs
For replacement, contact a CITROËN dealer or qualified workshop.
Practical information
Page 278 of 420
276
Direction indicator, sidelamp and
foglamp
Access is by passing a hand under the bumper.
F T urn the bulb holder a quarter of a turn and
p
ull it out.
F
C
hange the bulb.
For
reassembly carry out these operations in
r
everse
o
rder.
You
can also contact a CITROËN dealer or a
q
ualified workshop for the replacement of these
b
ulbs. For
the replacement of this type of lamp, c
ontact a CITROËN dealer or a qualified
w
orkshop.
Third brake lamp (light emitting
diodes-LED)Number plate lamps
(W5W)
To refit, press on the lens to clip it in place.
F
I
nsert a thin screwdriver into one of the
c
utouts in the the lens.
F
P
ush it outwards to unclip it.
F
R
emove the lens.
F
C
hange the faulty bulb.
Practical information
Page 296 of 420

294
Driving advice
Distribution of loads
F Distribute the load in the trailer so that the h
eaviest items are as close as possible to t
he axle and the nose weight approaches the
m
aximum permitted without exceeding it.
Air
density decreases with altitude, thus
r
educing engine per formance. Above
1 0
00 metres, the maximum towed load must
b
e reduced by 10 % for every 1 000 metres of
al
titude.
Side wind
F Take into account the increased sensitivity t
o side wind.
Cooling
Towing a trailer on a slope increases the temperature of the coolant.
As
the fan is electrically controlled, its cooling
c
apacity is not dependent on the engine speed.
F
T
o lower the engine speed, reduce your
s
peed.
The
maximum towed load on a long incline
d
epends on the gradient and the ambient
t
emperature.
In
all cases, keep a check on the coolant
t
emperature. F
I
f the warning lamp and the
S
TOP
warning lamp come on,
s
top the vehicle and switch off
t
he engine as soon as possible.
Braking
Towing a trailer increases the braking distance.
T o avoid overheating of the brakes on a long
m
ountain type of descent, the use of engine
b
raking is recommended.
Ty r e s
F Check the tyre pressures of the towing v
ehicle and of the trailer, observing the
re
commended
p
ressures.
Lighting
F Check the electrical lighting and signalling o
n the trailer.
Refer
to
the
"Technical
data"
section
for
details
o
f
the
weights
and
towed
loads
which
apply
to
y
our
vehicle.
When
not
towing
a
trailer,
remove
the
q
uickly-detachable
tow
ball
before
d
riving. The
rear parking sensors will be
d
eactivated automatically if a genuine
C
ITROËN towbar is used.
Practical information
Page 299 of 420
297
Very cold climate screen*
Removable protective screen which prevents the accumulation of snow at the radiator cooling fan.
F
O
ffer up the very cold climate screen to
t
he front of the lower section of the front
b u m p e r.
F
P
ress around its edge to engage its fixing
c
lips one by one.
F
U
se a screwdriver as a lever to release
e
ach fixing clip in turn.
Do
not forget to remove the very cold climate
s
creen
w
hen:
-
t
he ambient temperature exceeds 10 °C,
-
tow
ing,
-
d
riving
a
t
s
peeds
a
bove
7
5
m
ph
(
120 km/h).
Removal Fitting
360 Vision system
The pre-cut zone must be removed before fitting the screen to the front
b
umper, to allow operation of the
c
amera.
When
the very cold climate screen
i
s fitted, the image provided by the
c
amera is slightly different.
*
Depending
on
the
country
of
sale.
7
Practical information
Page 315 of 420

313
Brake wear depends on the style of driving, particularly in the case
o
f vehicles used in town, over short
d
istances. It may be necessary to
h
ave
the
condition of the brakes checked, even
b
etween
v
ehicle
s
ervices.
Unless
there is a leak in the circuit, a drop in
t
he
brake
fluid level indicates that the brake
p
ads
are
worn.
Brake pads
For information on checking brake d isc wear, contact a CITROËN dealer
o
r a qualified workshop.
Brake disc wear
Only use products recommended by CITROËN or products of equivalent
q
uality
an
d
sp
ecification.
In
order to optimise the operation of
u
nits as important as those in the
b
raking system, CITROËN selects and
o
ffers very specific products.
After
washing the vehicle, dampness,
o
r in wintry conditions, ice can form
o
n the brake discs and pads: braking
e
fficiency may be reduced. Make light
b
rake applications to dry and defrost
t
he brakes.
Electric parking brake
For more information, refer to the "Electric parking brake - Operating faults" section.
This
system does not require any
r
outine servicing. However, in the
e
vent of a problem, have the system
c
hecked by a CITROËN dealer or a
q
ualified
w
orkshop.
Manual gearbox
The gearbox does not require any m
aintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for the checking interval for
t
his
c
omponent.
Electronic gearbox
The gearbox does not require any maintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for details of the checking
i
nterval for this component.
Automatic gearbox
The gearbox does not require any maintenance (no oil change).
Refer
to the manufacturer's service
s
chedule for details of the level
c
hecking interval for this component.To
avoid damaging the electrical units,
n
ever use a high pressure jet wash in
t
he engine compartment.
8
Checks