2015 Citroen C4 ECO mode

313
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Level 1Level 2 Level 3 Comments
Navigation Settings
Navigation Enter destination
Display recent destinations.
Calculatory criteria
Fastest
Choose the navigation criteria.
The   map   displays   the   route   chosen   according   to   these  
criteria.
Shortest
Time/distance
Ecological
Tolls
Ferries
Strict - Close
Show
  route   on   map
Display the map and start navigation.
ConfirmSave the options.
SaveSave the current address.
Stop navigationDelete the navigation information.
VoiceChoose the volume for voice and announcement of street names.
DiversionDetour from your initial route by a certain distance.
Navigation
Display in text mode.
Zoom   in.
Zoom
  out.
Display
  in   full   screen   mode.
Use
  the   arrows   to   move   the   map.
Switch
  to   2D   map.

05
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Street names are visible on the map from the 100 m scale.
Configure
Select "
Aspect". Select:
- ""Day" map colour"   to   have   the   map  
always

  in   day   mode.
- ""Night" map colour
"   to   have   the   map  
always

  in   night   mode.
- "Automatic day/night
" to have
the   brightness   of   the   map   adjusted  
automatically

  according   to   the   ambient   light  
level.
 This

  mode   makes   use   of   the   vehicle's  
sunshine

  sensor   or   by   manual   operation   of  
the

  vehicle's   lighting.
Select "Map settings". Press on Navigation
 
to
 
display
 
the
 
primary
 
page

 
then
 
go
 
to
 
the
 
secondary
 
page.
MAP
Then "Confirm" to save the modifications.
330

08
347
C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
Depending on your telephone, you may be asked to accept automatic  connection   every   time   the   ignition   is   switched   on.
Depending
  on   the   type   of   telephone,   the   system  
will

  ask   you   to   accept   or   not   the   transfer   of   your  
contacts. The
  services   available   depend   on   the   network,   the   SIM   card   and   the  
compatibility

  of   the   Bluetooth   telephone   used.   Check   the   telephone  
manual

  and   with   your   network   provider   for   details   of   the   services  
available

  to   you.
On   return   to   the   vehicle,   the   last   telephone   connected   automatically  
reconnects,

  within   around   30   seconds   after   switching   on   the   ignition  
(Bluetooth

  activated).
To
  modify   the   automatic   connection   mode,   select   the   telephone   in  
the

  list   then   select   the   desired   profile.
The
  telephone   is   added   to   the   list.
BLUETOOTH
If not, select "
Update".
The   ability   of   the   system   to   connect   with   only   one   profile   depends   on  
the

  telephone.  
The
  two   profiles   may   both   connect   by   default.
Visit   www.citroen.co.uk   for   more   information   (compatibility,   additional  
help,

  ...).
Automatic reconnection
Connecting a Bluetooth peripheral
On switching on the ignition, the telephone connected when the ignition
  was   last   switched   off   is   automatically   reconnected,   if   this  
connection

  mode   had   been   activated   during   the   pairing   procedure.
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.
Press on Telephone
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Manual connection
Select "Bluetooth" to display the list of paired
peripherals.
Select
  the   peripheral   to   connect.
Press on "Search".
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
354
q
UESTION
ANSWER SOLUTION
Some   contacts   are  
duplicated

  in   the   list.
The   options   for   synchronizing   contacts   are   synchronizing   the   contacts  
on

  the   SIM   card,   the   contacts   on   the   telephone,   or   both.   When   both  
synchronizations

  are   selected,   some   contacts   may   be   duplicated.
Select " d isplay SIM card contacts" or " d isplay
telephone   contacts".
Contacts are not shown
in   alphabetical   order.
Some   telephones   offer   display   options.   Depending   on   the   settings  
chosen,

  contacts   can   be   transferred   in   a   specific   order.
Modify   the   display   setting   in   the   telephone  
directory

.
The system does not receive
 SMS  text  messages.The Bluetooth mode does not permit sending SMS text messages to the system.
CD, MP3
The
 
CD
 
is
 
ejected
 
automatically

 
or
 
is
 
not
 
played

 
by
 
the
 
player. The C
d is inserted upside down, is unplayable, does not contain any
audio
  data   or   contains   an   audio   format   which   the   player   cannot   play.-
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 Check

  the   content   in   the   case   of   a   recorded
 CD:

  refer   to   the   advice   in   the   "AUDIO"   section.
-

The audio system's CD player does not play DVDs.
- Some recorded CDs will not be played by the audio system  because   they   are   not   of   the   correct   quality.
The CD has been recorded in a format that is not compatible with the player  (udf,...).
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   system.
There is a long waiting period  following   the   insertion of a C

d or connection of a
USB
  memory   stick.When a new medium is inserted, the system reads a certain amount of data  (directory,   title,   artist,   etc.).  This   may   take   from   a   few   seconds   to   a  
few

  minutes. This
  phenomenon   is   normal.
The C
d
player sound is
poor. The
  CD   used   is   scratched   or   of   poor   quality. Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   equipment   settings   (bass,   treble,   ambiences)   are   unsuitable. Set   the   treble   or   bass   level   to   0,   without   selecting  
an

  ambience.

C4-2_en_Chap13b_SMEGplus_ed01-2015
C4-2_en_Chap13b_SMEGplus_ed01-2015
FREqUENTLY ASKED q UESTIONS
357
q

UESTION
ANSWER SOLUTION
With
 
the
 
engine
 
off,
 
the
 
system

 
switches
 
off
 
after
 
a

 
few
 
minutes
 
of
 
use.
When
 
the
 
engine
 
is
 
switched
 
off,
 
the
 
system's
 
operating
 
time
 
depends
 
on
 
the

 
battery
 
charge.
The
 
switch-off
 
is
 
normal:
 
the
 
system
 
switches
 
to
 
economy
 
mode
 
and
 
switches

 
off
 
to
 
prevent
 
discharging
 
of
 
the
 
vehicle's
 
battery.
Start
 
the
 
vehicle's
 
engine
 
to
 
increase
 
the
 
battery  
charge.
USB, portable player

, connection key
Playback
 
of
 
my
 
USB
 
memory

 
stick
 
starts
 
only
 
after

 
a
 
very
 
long
 
wait
 
(around

 
2
 
to
 
3
 
minutes).
Some
 
files
 
supplied
 
with
 
the
 
memory
 
stick
 
may
 
greatly
 
slow
 
down
 
access
 
to

 
reading
 
the
 
memory
 
stick
 
(multiplication
 
by
 
10
 
of
 
the
 
catalogue
 
time).
Delete
 
the
 
files
 
supplied
 
with
 
the
 
memory
 
stick
 
and

 
limit
 
the
 
number
 
of
 
sub-folders
 
in
 
the
 
file
 
structure

 
on
 
the
 
memory
 
stick.
When
 
I
 
connect
 
my
 
iPhone as telephone and
to

 
the
 
USB
 
port
 
at
 
the
 
same

 
time,
 
I
 
am
 
unable
 
to

 
play
 
the
 
music
 
files.
When
 
the
 
iPhone
 
connects
 
automatically
 
as
 
a
 
telephone,
 
it
 
forces
 
the
 
streaming

 
function.
 
The

 
streaming
 
function
 
takes
 
the
 
place
 
of
 
the
 
USB
 
function which is then not useable, there is a period without sound of t\
he
track

 
being
 
played
 
with
 
Apple® players.
Disconnect   and   reconnect   to   the   USB   port   (the  
USB

  function   takes   priority   over   streaming).

05

381
C4-2_en_Chap13c_RD5_ed01-2015
C4-2_en_Chap13c_RD5_ed01-2015
In the contextual menu:
-
select "
Telephone mode " to
transfer
  the   call   to   the   telephone.
-

deselect "
Telephone mode" to
transfer
  the   call   to   the   vehicle.
In
 
certain
 
cases,   the   combined   mode   has   to   activated   from   the  
telephone.
If

 
the
 
contact   has   been   cut   off,   when   you   reconnect   on   returning   to  
the

 
vehicle,
 
the   Bluetooth   connection   will   be   restored   automatically  
(depending

 
on   the   compatibility   of   the   telephone).
Combined mode
(to
 
leave
 
the
  vehicle   without   ending   the   call)
USING THE TELEPHONE
From the contextual menu, select
"DTMF tones"   and   confirm   to  
use

  the   digital   keypad   to   navigate   in  

the

  interactive   voice   response   menu.
From
  the   contextual   menu,  
select

"Switch"   and   conform   to   return  
to

  a   call   left   on   hold.
Interactive voice response
Consultation call

389
C4-2_en_Chap13c_RD5_ed01-2015
C4-2_en_Chap13c_RD5_ed01-2015
FREqUENTLY ASKED q UESTIONS
qUESTION ANSWER SOLUTION
The
 
quality   of   reception  
of the radio station
listened

  to   gradually  
deteriorates or the stored
stations do not function
(no

 
sound,   87.5 MHz   is  
displayed...). The

  vehicle   is   too   far   from   the   transmitter   used   by   the   station   listened  
to

  or   there   is   no   transmitter   in   the   geographical   area   through   which   the  
vehicle

  is   travelling. Activate
  the   RDS   function   to   enable   the   system  
to

  check   whether   there   is   a   more   powerful  
transmitter

  in   the   geographical   area.
The
  environment   (hills,   buildings,   tunnels,   basement   car   parks...)   block  
reception,

  including   in   RDS   mode.This
  phenomenon   is   normal   and   does   not   indicate  
a

  failure   of   the   audio   equipment.
The
  aerial   is   absent   or   has   been   damaged   (for   example   when   going  
through

  an   automatic   car   wash   or   in   an   underground   car   park).Have
  the   aerial   checked   by   a   CITROËN   dealer.
Sound cut-outs of 1 to
2 seconds
  in   radio   mode.During
  this   brief   sound   cut-out,   the   RDS   searches   for   another   frequency  
giving

  better   reception   of   the   station.Deactivate
  the   RDS   function   if   the   phenomenon   is  
too

  frequent   and   always   on   the   same   route.
The
 
traffic   announcement  
(T

A)
 
is
  displayed.   I   do  
not

 
receive   any   traffic  
information. The

  radio   station   does   not   broadcast   traffic   information.Tune
  to   a   radio   station   which   broadcasts   traffic  
information.
The stored stations are
not

 
found   (no   sound,  

87.5

 
MHz   is   displayed...). An
  incorrect   waveband   is   selected. Press the
band button to return to the waveband
on
  which   the   stations   are   stored.

392
C4-2_en_Chap13c_RD5_ed01-2015
C4-2_en_Chap13c_RD5_ed01-2015
FREqUENTLY ASKED q UESTIONS
qUESTION ANSWER SOLUTION
With
 
the   engine   off,   the  
audio

 
system   switches  
of

f
 
after   a   few   minutes  
of

 
use. When
  the   engine   is   switched   off,   the   audio   system   operating   time  
depends

  on   the   battery   charge.
The
  switch-off   is   normal:   the   audio   system   switches   to   economy   mode  
and

  switches   off   to   prevent   discharging   the   vehicle's   battery.Start
  the   vehicle's   engine   to   increase   the   battery  
charge.
The

 
message   "the   audio  
system

  is   overheated"  
appears

  on   the   display. In
  order   to   protect   the   installation   if   the   surrounding   temperature   is   too  
high,

  the   audio   system   switches   to   an   automatic   thermal   protection   mode  
leading

  to   a   reduction   of   the   volume   or   stopping   of   the   playing   of   the   CD.Switch
  the   audio   system   off   for   a   few   minutes   to  
allow

  the   system   to   cool.