2015 Citroen C4 warning light

151
C4-2_en_Chap08_securite_ed01-2015
C4-2_en_Chap08_securite_ed01-2015
Group of supplementary systems which help you   to   obtain   optimum   braking   in   complete  
s

afety   in   emergency   situations:
-
 
a
nti-lock   braking   system   (ABS),
-
 
e
lectronic   brake   force   distribution   (EBFD),
-
 
e
mergency   braking   assistance   (EBA).
Anti-lock braking system
and electronic brake force
distribution
Linked systems which improve the stability and manoeuvrability   of   your   vehicle   when   braking,   in p

articular   on   poor   or   slippery   sur faces.
Activation
The anti-lock braking system comes into operation   automatically   when   there   is   a   risk   of  
w

heel   lock.
Normal
  operation   of   the   ABS   may   make   itself  
f

elt   by   slight   vibration   of   the   brake   pedal.
Operating fault
If this warning lamp comes on, accompanied   by   an   audible   signal  
a

nd   a   message   in   the   screen,   it  
i

ndicates   a   malfunction   of   the   anti-
lock
  braking   system   which   could  
r

esult in loss of control of the vehicle
when
 b

raking.
If
  this   warning   lamp   comes   on,
 t

ogether   with   the   STOP and ABS
warning
  lamps,   accompanied   by   an
 a

udible   signal   and   a   message   in   the
 s

creen,   it   indicates   a   malfunction   of
 t

he   electronic   brake   force   distribution
 w

hich could result in loss of control of
the
  vehicle   when   braking.
Emergency braking
assistance
System which, in an emergency, enables you to   obtain   the   optimum   braking   pressure   more  
q

uickly,   thus   reducing   the   stopping   distance.
Activation
It is triggered by the speed at which the brake pedal   is   pressed.
The effect of this is a reduction in the
resistance of the pedal and an increase in
braking
 e

fficiency.
You must stop as soon as it is safe to do so.
In either case, contact a CITR
oËn

dealer or a
qualified
 w

orkshop.
When
 
braking
 
in
 
an
 
emergency,
 
press
 
v

ery
 
firmly
 
without
 
releasing
 
the
 
p

ressure. When
  braking   in   an   emergency,   press  
f

irmly   without   releasing   the   pressure.
When
 
replacing
 
wheels
 
(tyres
 
and
 
r

ims),
 
ensure
 
that
 
they
 
conform
 
to
 
the
 
ma

nufacturer's
 r

ecommendations.
Braking assistance systems
8
Safety

157
C4-2_en_Chap08_securite_ed01-2015
C4-2_en_Chap08_securite_ed01-2015
The driver must ensure that passengers use the seat belts correctly and that they are all
restrained
  securely   before   setting   off.
Wherever you are seated in the vehicle,
always fasten your seat belt, even for short
journeys.
Do
  not   interchange   the   seat   belt   buckles   as  
t

hey   will   not   fulfil   their   role   fully.
The seat belts are fitted with an inertia reel
permitting
  automatic   adjustment   of   the   length  
o

f   the   strap   to   your   size.   The   seat   belt   is  
s

towed   automatically   when   not   in   use.
be

fore and after use, ensure that the seat belt
is
  reeled   in   correctly.
The
  lower   part   of   the   strap   must   be   positioned  
a

s   low   as   possible   on   the   pelvis.
The
  upper   part   must   be   positioned   in   the  
h

ollow   of   the   shoulder.
The
  inertia   reels   are   fitted   with   an   automatic
 l

ocking   device   which   comes   into   operation   in
 t

he   event   of   a   collision,   emergency   braking
 o

r   if   the   vehicle   rolls   over.   You   can   release
 t

he   device   by   pulling   the   strap   firmly   and   then
 r

eleasing   it   so   that   it   reels   in   slightly.In
  order   to   be   effective,   a   seat   belt   must:
-  b e   tightened   as   close   to   the   body   as  
p

ossible,
-
 
b
e   pulled   in   front   of   you   with   a   smooth  
m

ovement,   checking   that   it   does   not  
t

wist,
-
be

used to restrain only one person,
-
 n

ot   bear   any   trace   of   cuts   or   fraying,
-
 
n
ot   be   converted   or   modified   to   avoid  
a

ffecting
 it
s
 p
erformance.
In accordance with current safety
regulations,
  for   all   repairs   on   your   vehicle's  
s

eat   belts,   go   to   a   qualified   workshop   with  
t

he   skills   and   equipment   needed,   which   a  
C

ITROËN   dealer   is   able   to   provide.
Have
  your   seat   belts   checked   regularly   by  
a

  CITROËN   dealer   or   a   qualified   workshop,  
p

articularly   if   the   straps   show   signs   of  
d

amage.
Clean the seat belt straps with soapy
water
  or   a   textile   cleaning   product,   sold   by  
C

ITROËN   dealers.
After
  folding   or   moving   a   seat   or   rear   bench  
s

eat, ensure that the seat belt is positioned
and
  reeled   in   correctly.Recommendations for children
Use a suitable child seat if the passenger is less than 12 years old or shorter than one
and
  a   half   metres.
Never
  use   the   same   seat   belt   to   secure   more  
t

han   one   person.
Never
  allow   a   child   to   travel   on   your   lap.
For
  more   information,   refer   to   the   "Child  
sea

ts"
 se
ction.
In the event of an impact
Depending on the nature and seriousness
of the impact ,
  the   pretensioning   device   may  
b

e deployed before and independently of the
airbags.
  Deployment   of   the   pretensioners  
i

s   accompanied   by   a   slight   discharge   of  
h

armless   smoke   and   a   noise,   due   to   the  
a

ctivation   of   the   pyrotechnic   cartridge  
i

ncorporated   in   the   system.
In
  all   cases,   the   airbag   warning   lamp  
comes
  on.
Following
  an   impact,   have   the   seat   belts  
s

ystem   checked,   and   if   necessary   replaced,  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop.
8
Safety

166
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Starting-switching off the engine with the 
" Keyless   Entry   and   Starting"   system
Starting the engine
F Place  the   gear   selector   lever   at   N for
vehicles   with   an   electronic   gearbox,   P or N
with
  an   automatic   gearbox,   or   neutral   with  
a m

anual
 g
earbox.
F
 
W
ith   the   electronic   key   inside   the   vehicle  
(

it   is   not   necessary   to   put   it   in   the   reader),  
p

ress   the   brake   pedal   for   vehicles   with  
a

n   electronic   or   automatic   gearbox,   or  
f

ully   declutch   for   vehicles   with   a   manual  
g

earbox. F
b
r
iefly press the "
START/STOP"
button.
 T
he   steering   column   unlocks  
a

nd   the   engine   starts   more   or  
l

ess   instantly   (see   the   advice   for  
D

iesel
 v
ersions).
If   this   warning   lamp   comes   on   after  
p

ressing   "START/STOP",   you   should  
h

old   the   brake   or   clutch   pedal   down  
u

ntil   the   warning   lamp   goes   off   and  
d

o   not   press   the   START/STOP   button  
ag

ain.
If
  one   of   the   starting   conditions   is   not
 m
et,   a   reminder   message   appears   in t
he   instrument   panel   screen.   In   some c

ircumstances,   it   is   necessary   to   turn
 t

he   steering   wheel   slightly   while   pressing
 t

he   "START/STOP"   button   to   assist
 u

nlocking   of   the   steering;   a   message
 w

arns   you   when   this   is   needed.If
  the   electronic   key   is   not   detected   in  
t

he   zone,   a   message   is   displayed.   Move  
t

he   electronic   key   into   the   zone   so   that  
t

he   engine   can   be   started.
The presence of the "
ke
yless Entry and
Starting"
  system   electronic   key   in   the  
r

ecognition   zone   is   essential.
For safety reasons, do not leave this
zone
  with   the   vehicle   running.For Diesel vehicles
, in
temperatures   below   zero   the  e
ngine   will   not   start   until   the  
p

reheater   warning   lamp   has  
g

one   off.
driving

187
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
When the ignition is on, the lighting   of   this   warning   lamp,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   in   the   multifunction  
s

creen,   indicates   a   gearbox  
m

alfunction.
Operating fault
You risk damaging the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f  
y
ou  
f
orce  
t
he  
l
ever  
f
rom  
p
osition P
to another position when the
battery
  is   flat.
To
  reduce   fuel   consumption   when  
s

tationary   for   long   periods   with   the  
e

ngine   running   (traffic   jam...),   position  
t

he   gear   lever   at   N and apply the
parking
  brake,   unless   it   is   programmed  
i

n   automatic   mode.
In
 
this
 
case,
 
the
 
gearbox
 
switches
 
to
 
back-up
 
m

ode
 
and
 
is
 
locked
 
in
 
3rd
 
gear.
 
You
 
may
 
feel
 
a

 
substantial
 
knock
 
when
 
changing
 
from
 
P
to R
 
and
 
from
 
N to R .
 
This
 
will
 
not
 
cause
 
any
 
d

amage
 
to
 
the
 
gearbox.
Do
 
not
 
exceed
 
60
 
mph
 
(100
 
km/h),
 
local
 
speed
 
r

estrictions
 p

ermitting.
Have
 
it
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
This
 
warning
 
lamp
 
may
 
also
 
come
 
on
 
if
 
a
 
door
 
i

s
 ope

ned.
9
Driving

192
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
Stop & Start
Operation
Going into engine STOP mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , at speeds below
12
 
m

ph  
(
20  
k
m/h),  
o
r  
v
ehicle  
s
tationary  
w
ith  
P

ureTech   130   petrol   and   BlueHDi   Diesel  
v

ersions,   when   you   put   the   gear   lever   into  
n

eutral and release the clutch pedal,
If your vehicle is fitted with the
system,
  a   time   counter   calculates
 t

he   sum   of   the   periods   in   STOP
 m

ode   during   a   journey.   It   resets
 i

tself   to   zero   every   time   the
 i

gnition   is   switched   on   with   the
 k

ey   or   the   "START/STOP"   button.
-

w

ith an electronic gearbox , at a speed
below
  5   mph   (8   km/h),   when   you   press  
t

he
 
brake   pedal   or   put   the   gear   lever   into  
p

osition N .
Special cases: STOP mode
unavailable
STOP mode is not invoked when:
-  t he   vehicle   is   on   a   steep   slope   (up   or  
d

ow n),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   (using  
t

he   key   or   the   "   START/STOP"   button),
-
 
t
he   electric   parking   brake   is   applied   or  
be

ing
 a
pplied,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning   lamp  
f

lashes for a few seconds, then
goes
  off.
This operation is perfectly normal.
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
temporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
stops
 
in
 
the
 
traffic   (red   lights,   traffic   jams,   or   other...).  
The
 
engine
 
restarts
 
automatically
 
-
 
START
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
off.
 
The
 
restart
 
takes
 
place   instantly,   quickly   and   silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
reduces
 
fuel
 
consumption
 
and
 
exhaust
 
emissions
 
as
 
well
  as   the   noise   level   when   stationary.
Never
 
refuel
 
with
 
the
 
engine
 
in
 
STOP
 
m

ode;
 
you
 
must
 
switch
 
off
 
the
 
ignition
 
w

ith
 
the
 
key
 
or
 
the
 
"START/STOP"
 
b

utton.
With
 
an
 
electronic
 
gearbox,
 
for
 
your
 
c

omfort
 
during
 
parking
 
manoeuvres,
 
S

TOP
 
mode
 
is
 
not
 
available
 
for
 
a
 
few
 
s

econds
 
after
 
coming
 
out
 
of
 
reverse
 
g

e a r.
STOP
 
mode
 
does
 
not
 
affect
 
the
 
f

unctionality of the vehicle, such as
braking,
 
power
 
steering,
 
for
 
example.
driving

197
C4-2_en_Chap09_conduite_ed01-2015
C4-2_en_Chap09_conduite_ed01-2015
No alert will be given in the following situations:
-  i n   the   presence   of   immobile   objects  
(

parked   vehicles,   barriers,   street   lamps,  
r

oad
 s
igns...),
-
 
w
ith   vehicles   moving   in   the   opposite  
d

irection,
-
 
d
riving   on   a   sinuous   road   or   a   sharp  
c

o r n e r,
The
 
alert
 
is
 
given
 
by
 
a
 
warning
 
lamp
 
which
 
c

omes
 
on
 
in
 
the
 
door
 
mirror
 
on
 
the
 
side
 
in
 
q

uestion
 
as
 
soon
 
as
 
a
 
vehicle
 
-
 
car,
 
lorry,
 
c

ycle -
 
is
 
detected
 
and
 
the
 
following
 
conditions
 
a

re
 
fulfilled:
-
 
a

ll
 
the
 
vehicles
 
must
 
be
 
moving
 
in
 
the
 
sa

me
 d

irection,
-
 
t

he
 
speed
 
of
 
your
 
vehicle
 
is
 
between
 
7
 
and
 
7

5
 
mph
 
(12
 
and
 
140
 
km/h),
-
 
w

hen
 
you
 
overtake
 
a
 
vehicle
 
with
 
a
 
speed
 
d

ifference
 
of
 
less
 
than
 
6
 
mph
 
(10
 
km/h),
-
 
w

hen
 
a
 
vehicle
 
overtakes
 
you
 
with
 
a
 
speed
 
d

ifference
 
of
 
less
 
than
 
15
 
mph
 
(25
 
km/h),
-
 
t

he
 
traffic
 
must
 
be
 
flowing
 
normally,
-
 
i

n
 
the
 
case
 
of
 
an
 
overtaking
 
manoeuvre,
 i
f
 
this
 
is
 
prolonged
 
and
 
the
 
vehicle
 
being
 ov
ertaken
 
remains
 
in
 
the
 
blind
 
spot,
-
 
y

ou
 
are
 
driving
 
on
 
a
 
straight
 
or
 
slightly
 
c

urved road,
-
 
y

our
 
vehicle
 
is
 
not
 
pulling
 
a
 
trailer,
 
a
 
c

aravan... -
 w hen   overtaking   (or   being   overtaken   by)   a  v
ery   long   vehicle   (lorry,   coach...)   which   is  
a

t   the   same   time   detected   at   the   rear   in   the  
b

lind   spot   angle   and   present   in   the   driver's  
f

orward field of vision,
-
 
i
n   very   heavy   traffic:   vehicles   detected   in  
f

ront and behind are confused with a lorry
or
  a   stationary   object,
-
 
w
hen   overtaking   quickly.
9
driving

266
C4-2_en_Chap11_info-pratique_ed01-2015
C4-2_en_Chap11_info-pratique_ed01-2015
F If  the   warning   lamp   and   the  S
TOP  warning   lamp   come   on,  
s

top the vehicle and switch off
the
  engine   as   soon   as   possible.
Braking
Towing a trailer increases the braking distance.
T o   avoid   overheating   of   the   brakes   on   a   long  
m

ountain   type   of   descent,   the   use   of   engine  
b

raking   is   recommended.
Ty r e s
F Check   the   tyre   pressures   of   the  
towing   vehicle   and   of   the   trailer,   observing  
t

he
 re
commended
 p
ressures.
Lighting
F Check  the   electrical   lighting   and   signalling  o
n   the   trailer.
The
  rear   parking   sensors   will   be  
d

eactivated   automatically   if   a   genuine  
C

ITROËN   towbar   is   used.
Cooling
Towing a trailer on a slope increases the temperature   of   the   coolant.
As
  the   fan   is   electrically   controlled,   its   cooling  
c

apacity   is   not   dependent   on   the   engine   speed.
F
 
T
o   lower   the   engine   speed,   reduce   your  
s

peed.
The
  maximum   towed   load   on   a   long   incline  
d

epends   on   the   gradient   and   the   ambient  
t

emperature.
In
  all   cases,   keep   a   check   on   the   
c
oolant  
t

emperature.
Practical information

277
C4-2_en_Chap12_caracteristique_ed01-2015
C4-2_en_Chap12_caracteristique_ed01-2015
* The kerb weight is equal to the unladen weight + driver (75 kg).
* *   T he   weight   of   the   braked   trailer   can   be   increased,   within   the   GTW   limit,   if   the   GV W   of   the   towing   vehicle   is   reduced   by   an   equal   amount.  
Warning:
  towing   using   a   lightly   loaded   towing   vehicle   may   have   an   adverse   effect   on   its   road   holding.
Petrol weights and towed loads (in kg)
The GTW and towed load values indicated are valid up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each   additional   1   000   metres   of   altitude.
When
  towing,   the   maximum   authorised   speed   is   reduced   (comply   with   the   legislation   in   force   in   your   country).
High
  ambient   temperatures   may   result   in   a   reduction   in   the   per formance   of   the   vehicle   to   protect   the   engine;   if   the   ambient   temperature   is   above   37   °C,  
l

imit   the   towed   load.
Petrol engine
VTi 95Puretech 110 V Ti 120
Gearbox Manual

(5 - speed) Manual

(5 - speed) Manual

(5 - speed) Automatic

(4 - speed)
Model code:
NC... 8FR0HNZ6
HNZ6/1 -/2 5FS05FS9

5FS9/D
-  
U
nladen   weight
1 2001 200 1 205 1   270
-  
K
erb   weight*
1   275
1   275
1   280
1   345
-  
G
ross   vehicle   weight   (GV W)
1   720
1   770
1   765
1   755
-  
G
ross   train   weight   (GTW)  

o
n   a   12   %   gradient
2   920
2   970
3   065
3   055
-  
B
raked   trailer   (within   the   GTW   limit)  

o
n   a   12   %   gradient
1 200
1 2001   300
1   300
-  
B
raked   trailer**   (with   load   transfer   within   the  
G

TW   limit)
1 450
1 4501 550 1 550
-  
U
nbraked   trailer
635635640 670
-  
R
ecommended   nose   weight
75757575
12
Technical data