2015 Citroen C4 light

27
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Passenger's
airbag systemfixed
  in   the   seat   belt  a
nd   passenger's   front  
a

irbag
 w
arning
 lam
ps
 d

isplay.The control switch, located in the glove box,   has   been   placed   in   the   "ON"
position.
The
  passenger's   front   airbag   is   activated.
In this case, do not install a "rear ward
facing"
  child   seat.Move the control switch to the "OFF" position to
deactivate   the   passenger's   front   airbag.
In
  this   case,   you   can   install   a   "rear ward   facing"   child  
sea

t.
Warning
/indicator lampis on Cause Action/Observations
Stop & Star t fixed. When
 
the
 
vehicle
 
stops
 
(red
 
lights,
 t

raffic
 
jams,
 
...)
 
the
 
Stop
 
&
 
Start
 
system
 h

as
 
put
 
the
 
engine
 
into
 
STOP
 
mode. The
  warning   lamp   goes   off   and   the   engine   restarts  
a

utomatically   in   START   mode,   as   soon   as   you   want   to  
m

ove   off.
flashes for a few
seconds,
 
then
 
goes
 
o

f f. STOP
 
mode
 
is
 
temporarily
 
u

navailable.
or
START
 
mode
 
is
 
invoked
 
au

tomatically. For
  more   information   on   special   cases   with   STOP  
m

ode   and   START   mode,   refer   to   the   "Stop   &   Start"  
s

ection.
Automatic
wiping
fixed.
The wiper control is pushed
downwards. Automatic  front   wiping   is   activated.
To   deactivate   automatic   wiping,   operate   the   control  
s

talk   downwards   or   put   the   stalk   into   another   position.
Lighting dimmer fixed. The
 
lighting
 
dimmer
 
is
 
making
 
an
 
adj

ustment.
You  can   adjust   the   level   of   illumination   of   the  
i

nstruments   between   1   and   16.
1
Monitoring

35
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
Permits manual adjustment of the brightness of the   instruments   and   controls   to   suit   the   ambient  
l

ight   level.   Only   operates   when   the   vehicle  
l

ighting   is   on   in   night   mode.
Lighting dimmer
Activation
F Press  this   button   to   change   the   brightness  o
f   the   instruments   and   controls.
F
 
W
hen   the   lighting   reaches   the   minimum  
s

etting,   release   this   button,   then   press  
a

gain   to   increase   it.
or
F
 
W
hen   the   lighting   reaches   the   maximum  
s

etting,   release   this   button,   then   press  
a

gain   to   reduce   it.
F
 
W
hen   the   lighting   reaches   the   level   of  
b

rightness   required,   release   this   button.
Deactivation
When the vehicle lighting is off, or in day mode (daytime  running  lamps  on),  pressing  the  button d

oes   not   have   any   effect.
This
 
indicator
 
and
 
the
 
lighting
 
v

alue
 
appear
 
in
 
the
 
middle
 
of
 
the
 
i

nstrument
 
panel
 
during
 
adjustment
 
t

o
 
show
 
the
 
setting
 
from
 
the
 
16
 
levels
 
a

vailable.
1
Monitoring

36
C4-2_en_Chap01_controle-de-marche_ed01-2015
C4-2_en_Chap01_controle-de-marche_ed01-2015
In the instrument panel, you can change the colour   of   its   dials   (button   A)
  independently   from  
t

hat   of   the   screens   (button   B).
There
  are   five   colour   variants,   from   white   to  
b

lue.
F
 
P
ress   the   appropriate   button   as   many  
t

imes   as   needed   to   obtain   the   desired  
c

o l o u r.
Customising the instrument
panel colours
System allowing certain screens to be switched off   for   night   driving.
The
  instrument   panel   remains   on   with   the  
v

ehicle   speed,   electronic   or   automatic   gearbox  
g

ear   selected,   cruise   control   or   speed   limiter  
i

nformation,   if   in   use,   and   the   low   fuel   alerts   as  
a

ppropriate.
If
  there   is   an   alert   or   a   change   in   a   function  
o

r   to   a   setting,   the   black   panel   mode   is  
i

nterrupted.
Black panel (black screen)
Activation
F With   the   vehicle   lighting   on,   press   this  b
utton   again   to   activate   the   black   panel.
F
 
P
ress   once   more   to   illuminate   on   the  
v

arious   screens   again.
Monitoring

38
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Once the "TRIP COMPUTER" menu has been selected,   you   can   start   diagnostics   of   the   status  
o

f   the   equipment   (active,   not   active,   faulty).
Trip computer Date and time
Once the "DATE AND TIME" menu has been s
elected,   you   have   access   to   the   following  
se

ttings:
-
year,
-
 
m
onth,
-


d ay,
-
hours,
-
 m

inutes,
-
 
1
2   or   24   hour   mode.
F
 
O
nce   you   have   selected   a   setting,   press  
t

he "7" or " 8"
  buttons   to   change   its   value.
F

P
ress the " 5" or " 6" buttons to switch
respectively
  to   the   previous   or   next   setting.
F

P
ress the "OK" button to record the
change
  and   return   to   the   normal   display   or  
p

ress the "Back"
 
button   to   cancel.
Languages
Once the "LANGUAGES" menu has been selected,   you   can   choose   the   language   used   by  
t

he   display,   from   a   pre-defined   list.
Vehicle parameters
Once the " VEHICLE PAR AM" menu has been selected, you can activate or deactivate the
following
 e

quipment:
-
 
"
PARK  
B
R AKE"  
(
Automatic  
e
lectric  
p
arking  
b

rake;   refer   to   the   "Driving"   section),
-
 
"
BEND   LIGHTING"   (Directional   lighting;  
r

efer   to   the   " Visibility"   section),
-
 
"
AUTO   HEADLAMPS"   (Automatic  
i

llumination   of   headlamps;   refer   to   the  
"

Visibility"
 s
ection),
-
 
"
REAR   WIPE   ACT"   (Rear   wiper   coupled  
w

ith   reverse   gear;   refer   to   the   " Visibility"  
s

ection),
-
 
"
GUIDE  
L
AMPS"  
(
Guide-me-home  
l
ighting;  
r

efer   to   the   " Visibility"   section),
-
 
"
ELECTRIC   BOOT"   (Selective   unlocking  
o

f   the   boot;   refer   to   the   "Access"   section),  
"A

c c ess"),
-
 
"
CABIN   SELECT"   (Selective   unlocking;  
r

efer   to   the   "Access").
For
  safety   reasons,   configuration   of   the  
m

ultifunction   screen   by   the   driver   must  
o

nly   be   done   when   stationary.
Multifunction screens

41
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
"Personalisation-
configuration" menu
This menu gives access to the following functions:
-
 
"
Define   the   vehicle   parameters",
-
 
"
Choice   of   language",
-
 
"
Display   configuration".
Define the vehicle parameters
- "Vehicle  lighting"   (see   the   " Visibility"  s
ection):
●
 
"
Directional   headlamps"   (Main   /  
a

dditional
 d
irectional
 l
ighting),
-
 
"
Interior   lighting"   (see   the   " Visibility"  
s

ection):
●
 
"
Follow-me-home   headlamps"  
(

Automatic   operation   of   headlamps   after  
s

witching   off   the   ignition),
●
 
"
Welcome   lighting"   (Exterior   and   interior  
w

elcome   lighting).
This
 
menu
 
allows
 
you
 
to
 
activate
 
or
 
deactivate
 t
he
 
following
 
equipment,
 
classified
 
in
 
different
 
c

ategories:
-
 
"

Access
 
to
 
the
 
vehicle"
 
(see
 
the
 
"Access"
 
s

ection):
●
 
"

Plip
 
action"
 
(Selective
 
unlocking
 
of
 
the
 
d

river's
 do

or),
●
 
"

Unlocking
 
boot
 
only"
 
(Selective
 
u

nlocking
 
of
 
the
 
boot).
-
 
"

Driving
 
assistance":
●
 
"

Parking
 
brake
 
automatic"
 
(Automatic
 
e

lectric
 
parking
 
brake;
 
see
 
the
 
"Driving"
 
s

ection),
●
 
"

Rear
 
wipe
 
in
 
reverse
 
gear"
 
(Rear
 
w

iper
 
coupled
 
to
 
reverse
 
gear;
 
see
 
the
 
"

Visibility"
 s

ection),
●
 
"

Speeds
 
memorised"
 
(Memorising
 
s

peeds;
 
see
 
the
 
"Driving"
 
section).
2
Multifunction screens

42
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Choice of language
F Press the "7" or " 8" buttons to set the
value   required   (15,   30   or   60   seconds),   then  
p

ress the "OK"
 
button   to   confirm.
F

P
ress the " 5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
F

P

ress the " 5" or " 6" buttons to select
the
 
"Interior
 
lighting"
 
line,
 
then
 
the
 
"O

K"  button;
 
then
 
follow
 
the
 
same
 
p

rocedure
 
to
 
select
 
the
 
"Follow-me-home
 
h

eadlamps"
 l

ine.
For example: setting of the duration of the " follow-me-home" l ighting
F

P
ress the " 7" or " 8" buttons, to select the
"Define
  the   vehicle   parameters"   menu,  
t

hen the " OK"
  button. Once
  this   menu   has   been   selected,   you   can  c
hoose   the   language   used   by   the   display   from  
a

  pre-defined   list.
Multifunction screens

44
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
Touch screen tablet
General operation
Principles
Press the virtual buttons in the touch screen
tablet.
Each  menu   is   displayed   over   one   or   two   pages  
(

primary   page   and   secondary   page).
For reasons of safety, the driver
should only carr y out operations
that require close attention, with the
vehicle stationary.
Some
 
functions
 
are
 
not
 
accessible
 
w

hen
 d

riving.
This
 
system
 
gives
 
access
 
to:
-
 
m

enus
 
for
 
adjusting
 
settings
 
for
 
vehicle
 f
unctions
 
and
 
systems,
-
 a
udio
 
and
 
display
 
settings
 
menus,
-
 
a

udio
 
system
 
and
 
telephone
 
controls
 
and
 
t

he
 
display
 
of
 
associated
 
information.
-
 
t

he
 
display
 
of
 
alert
 
messages,
-
 
t

he
 
display
 
of
 
the
 
ambient
 
temperature
 

(a
 
blue
 
snowflake
 
appears
 
if
 
there
 
is
 
a
 
risk
 
o

f
 
ice),
-
 
t

he
 
display
 
of
 
the
 
trip
 
computer.
And,
 
depending
 
on
 
equipment,
 
it
 
also
 
allows:
-
 
t

he
 
display
 
of
 
visual
 
parking
 
sensors
 
i

nformation,
-
 
a

ccess
 
to
 
the
 
controls
 
for
 
the
 
navigation
 
s

ystem
 
and
 
Internet
 
services,
 
and
 
the
 
d

isplay
 
of
 
associated
 
information.
Recommendations
It is necessary to press firmly, particularly for " flick"   gestures   (scrolling   through   lists,   moving  
t

he
 m
ap...).
A
  light   wipe   is   not   enough.
The
  screen   does   not   recognise   pressing   with  
m

ore   than   one   finger.
This
  technology   allows   use   at   all   temperatures  
a

nd   when   wearing   gloves.
Do
  not   use   pointed   objects   on   the   touch   screen  
t

ablet.
do n

ot touch the touch screen tablet with wet
hands.
Uses
  a   soft   clean   cloth   to   clean   the   touch  
s

creen
 t
ablet. Use
  this   button   to   go   to   the  
s

econdary
 pag
e.
After
  a   few   moments   with   no   action   on  
t

he   secondary   page,   the   primary   page  
i

s   displayed   automatically.
Use
  this   button   to   return   to   the  
p

rimary
 pag
e.
Use
  this   button   for   access   to  
a

dditional   information   and   to   the  
s

ettings   for   certain   functions.
Use
  this   button   to   confirm.
Use
  this   button   to   quit.
Multifunction screens

46
C4-2_en_Chap02_ecran-multifonction_ed01-2015
C4-2_en_Chap02_ecran-multifonction_ed01-2015
"Driving" menu
ButtonCorresponding function Comments
Speed settings Memorisation
  of   speeds   for   use   with   the   speed   limiter   or   cruise   control.
Vehicle settings Access
  to   other   functions   with   settings   that   can   be   adjusted.   The   functions   are   grouped  
t

ogether   under   three   tabs:
-
"[Driving assistance ]"
-
 
"
[Automatic  
p
arking  
b
rake]"  
(
Automatic  
e
lectric  
p
arking  
b
rake;  
s
ee  
t
he  
"
Driving"  
s
ection),
-
 
"
[Automatic   rear   wiper   in   reverse]"   (Activation   of   rear   wiper   coupled   to   reverse   gear;   see  
t

he   " Visibility"   section)
-
"[Lighting ]"
-
 
"
[Guide-me-home   lighting]"   (Automatic   guide   me   home   lighting;   see   the   " Visibility"  
s

ection),
-
 
"
[Welcome   lighting]"   (Exterior   welcome   lighting;   see   the   "[ Visibility]"   section),
-
 
"
[Adaptive   lighting]"   (Main   /   additional   directional   lighting;   see   the   " Visibility"   section).
-
"[Vehicle access ]"
-
 
"
[Driver   plip   action]"   (Selective   unlocking   of   the   driver's   door;   see   the   "[Access]"  
s

ection).
-
 
"
[Unlocking   boot]"   (Selective   unlocking   of   the   boot;   see   the   "Access"   section).
Select
  or   deselect   the   tabs   at   the   bottom   of   the   screen   to   display   the   functions   required.
Diagnostic List
  of   current   alerts.
The
  systems   with   settings   that   can   be   adjusted   are   detailed   in   the   table   below.
Multifunction screens