2015 Citroen C4 engine

213
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Petrol engines
The various caps and covers allow access for
checking  the   levels   of   the   various   fluids   and   for r

eplacing   certain   components.
1.
 P

ower
 s
teering
 r
eservoir.
2.
 S

creenwash   and   headlamp   wash   reservoir.
3.
 C

oolant
 r
eservoir.
4.
 B

rake   fluid   reservoir.
5.
 B

attery/Fuses.
6.
 F

usebox.
7.
 A

ir   filter.
8.
 E

ngine   oil   dipstick.
9.
 E

ngine   oil   filler   cap.
10
Checks

214
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
* According to engine.
Diesel engines
The various caps and covers allow access for
checking  the   levels   of   the   various   fluids,   for  
r

eplacing   certain   components   and   for   priming  
t

he   fuel   system.
1.
 P

ower
 s
teering
 r
eservoir.
2.
 S

creenwash   and   headlamp   wash   reservoir.
3.
 C

oolant
 r
eservoir.
4.
 B

rake   fluid   reservoir.
5.
 B

attery/Fuses.
6.
 F

usebox.
7.
 A

ir   filter.
8.
 E

ngine   oil   dipstick.
9.
 E

ngine   oil   filler   cap.
10.
 P

riming
 pu
mp*.
11.
 B

leed   screw*.
Checks

215
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Checking levels
The check is carried out either when the   ignition   is   switched   on   using   the  
o

il   level   indicator   in   the   instrument  
p

anel   for   vehicles   so   equipped,   or  
u

sing   the   dipstick.
Engine oil level
Checking using
the dipstick
Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless other wise indicated.
I f   a   level   drops   significantly,   have   the   corresponding   system   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
It
  is   normal   to   top   up   the   oil   level   between  
t

wo   services   (or   oil   changes).   CITROËN  
r

ecommends   that   you   check   the   level,   and   top  
u

p   if   necessary,   every   3   000   miles   (5   000   kms).A
  =   MA X
B
  =   MINIf you find that the level is above the A
  mark   or  
belo

w the B   mark,   do not star t the engine.
-

I
f the level is above the MAX
 
mark   (risk  
o

f   damage   to   the   engine),   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
-

I
f the level is below the MIN
 
mark,   you  
m

ust   top   up   the   engine   oil.
Oil grade
Before topping-up the oil or changing the oil, check   that   the   oil   is   the   correct   grade   for   your  
e

ngine   and   conforms   to   the   manufacturer's  
r

ecommendations.
Take
 
care
 
when
 
working
 
under
 
the
 
b

onnet,
 
as
 
certain
 
areas
 
of
 
the
 
engine
 
m

ay
 
be
 
extremely
 
hot
 
(risk
 
of
 
burns)
 
and
 
t

he
 
cooling
 
fan
 
could
 
start
 
at
 
any
 
time
 
(

even
 
with
 
the
 
ignition
 
off).
To
 
ensure
 
that
 
the
 
reading
 
is
 
correct,
 y
our
 
vehicle
 
must
 
be
 
parked
 
on
 
a
 
level
 
s

ur face
 
with
 
the
 
engine
 
having
 
been
 
off
 
f

or
 
more
 
than
 
30
 
minutes. Refer
 
to
 
the
 
"Petrol
 
engine"
 
or
 
"Diesel
 
engine"
 
s

ection
 
for
 
the
 
location
 
of
 
the
 
dipstick
 
in
 
the
 
e

ngine
 
compartment
 
of
 
your
 
vehicle.
F
 
T

ake
 
the
 
dipstick
 
by
 
its
 
coloured
 
grip
 
and
 
r

emove
 
it
 
completely.
F
 
W

ipe
 
the
 
end
 
of
 
the
 
dipstick
 
using
 
a
 
clean
 
n

on-fluffy
 
cloth.
F
 
R

efit
 
the
 
dipstick
 
and
 
push
 
fully
 
down,
 
then
 
p

ull
 
it
 
out
 
again
 
to
 
make
 
the
 
visual
 
check:
 
t

he
 
correct
 
level
 
is
 
between
 
the
 
marks
 
A
and B .
10
Checks

216
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Topping up the engine oil level
Refer to the "Petrol engine" or "Diesel engine" section for the location of the oil filler cap in the
engine
  compartment   of   your   vehicle.
F
 
U
nscrew   the   oil   filler   cap   to   reveal   the   filler  
a

perture.
F
 
A
dd   oil   in   small   quantities,   avoiding   any  
s

pills   on   engine   components   (risk   of   fire).
F
 
W
ait   a   few   minutes   before   checking   the  
l

evel   again   using   the   dipstick.
F
 
A
dd   more   oil   if   necessary.
F
 
A
fter   checking   the   level,   carefully   refit   the  
o

il   filler   cap   and   the   dipstick   in   its   tube.
After
  topping   up   the   oil,   the   check   when  
s

witching   on   the   ignition   with   the   oil   level  
i

ndicator   in   the   instrument   panel   is   not   valid  
d

uring   the   30   minutes   after   topping   up.
Engine oil change
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
In
  order   to   maintain   the   reliability   of   the   engine  
a

nd   emission   control   system,   never   use  
a

dditives   in   the   engine   oil.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
The
  brake   fluid   level   should   be   close  
t

o   the   "MA X"   mark.   If   it   is   not,   check  
t

he   brake   pad   wear.
Power steering
fluid level
The power steering fluid level should b
e   close   to   the   "MA X"   mark.   With   the e

ngine   cold,   unscrew   the   cap   to   check
 t

he   level.
Checks

217
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Screenwash / headlamp
wash fluid level
Specification of the fluid
To ensure optimum cleaning and to avoid freezing,   the   fluid   should   never   be   topped   up   or r

eplaced   by   plain   water.
In wintry conditions, the use of a fluid
with
  an   ethyl   alcohol   or   methanol   base   is  
re

commended.
To
 
check
 
the
 
level
 
or
 
top
 
up
 
the
 
f

luid
 
on
 
vehicle
 
fitted
 
with
 
headlamp
 
w

ashers,
 
immobilise
 
the
 
vehicle
 
and
 
s

witch
 
of
 
the
 
engine.
F
o
p

en the bonnet and secure it with the
st ay.
F
 
O

pen
 
the
 
screenwash
 
reservoir
 
filler
 
cap.
F
 
T

ake
 
and
 
pinch
 
the
 
level
 
gauge
 
to
 
block
 
its
 
b

reather.
F
 
R

emove
 
the
 
gauge
 
completely
 
from
 
t

he reservoir to read the level in the
transparent
 s

ection.
Coolant level
The coolant level should be close
to   the   "MA X"   mark   but   should   never  
e

xceed   it.
Fluid specification
The coolant must conform to the manufacturer's r ecommendations.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
When
  the   engine   is   warm,   the   temperature   of  
t

he   coolant   is   regulated   by   the   fan.
In   addition,   as   the   cooling   system   is  
p

ressurised, wait at least one hour after
switching   off   the   engine   before   carrying   out  
any   work.
To   avoid   any   risk   of   scalding,   unscrew   the   cap  
b

y   two   turns   to   allow   the   pressure   to   drop.  
W

hen   the   pressure   has   dropped,   remove   the  
c

ap   and   top   up   the   level. F  
T
op   up   if   necessary.
F
R
efit the filler cap to the reservoir and
close   the   bonnet.
10
Checks

219
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Checks
Particle filter (Diesel)
- fixed  illumination   of   the   particle  f
ilter   warning   lamp,   accompanied  
b

y   an   audible   signal   and   a  
m

essage   that   there   is   a   risk   of  
b

lockage   of   the   particle   filter.
The presence of this label, in particular with
the
 
Stop
 
&
 
Start
 
system,
 
indicates
 
the
 
use
 
of
 
a s

pecific 12 V lead-acid battery with special
technology
 
and
 
specification.
 
The
 
involvement
 
o

f
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop
 
i

s
 
essential
 
when
 
replacing
 
or
 
disconnecting
 
t

he
 
battery. As
 
soon
 
as   the   traffic   conditions   permit,  
r

egenerate   the   filter   by   driving   at   a   speed   of   at  
l

east
 
40
 
mph   (60   km/h)   until   the   warning   lamp  
g

oes
 
off.
If
 
the
 
warning   lamp   stays   on,   refer   to   the  
"

Additive
 
level"   section.
Unless
 
other wise
 
indicated,
 
check
 
these
 
components
 
in
 
accordance
 
with
 
the
 
manufacturer's
 
service
 
schedule
 
and   according   to   your   engine.
Other wise,
 
have
 
them
 
checked
 
by
 
a
 
CITROËN
 
dealer
 
or
 
a
 
qualified
 
workshop.
Air filter and passenger compartment filter
Refer to the manufacturer's s
ervice schedule for details of the
replacement
  intervals   for   these  
c

omponents.
Oil filter
Replace the oil filter each time the e ngine   oil   is   changed.
Refer
  to   the   manufacturer's  
s

ervice schedule for details of
the
  replacement   interval   for   this  
c

omponent.
12 V battery
The battery does not require any maintenance.
H owever,   check   that   the   terminals   are   clean a

nd   correctly   tightened,   particularly   in   summer
 a

nd   winter.
When carrying out work on the battery, refer to the "12 V battery" section for details of the
precautions
  to   be   taken   before   disconnecting  
t

he   battery   and   following   its   reconnection.Depending
  on   the   environment   (e.g.   dusty  a
tmosphere)   and   the   use   of   the   vehicle  
(e.g.
  city   driving),   replace them twice as often
if necessary .
A
  clogged   passenger   compartment   filter   may  
h

ave   an   adverse   effect   on   the   per formance  
o

f   the   air   conditioning   system   and   generate  
u

ndesirable
 o
dours.The start of saturation of the particle filter is
indicated
  by:
on a n

ew vehicle, the first operations of
regeneration
  of   the   particle   filter   may   be  
a

ccompanied   by   the   smell   of   "burning",  
w

hich   is   per fectly   normal.
Following
  prolonged   operation   of   the  
v

ehicle at very low speed or at idle,
you
  may,   in   exceptional   circumstances,  
n

otice   the   emission   of   water   vapour   at  
t

he   exhaust   on   acceleration.   This   does  
n

ot affect the behaviour of the vehicle
or
  the   environment.
10
Checks

221
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
adblue® additive and SCR system
f
or
 
BlueHDi   Diesel   engines
To assure respect for the environment and c
onformity   with   the   new   Euro   6   emissions  
s

tandard,   without   adversely   affecting   the  
p

er formance   or   fuel   consumption   of   Diesel  
e

ngines,   CITROËN   has   taken   the   decision   to  
e

quip   its   vehicles   with   an   effective   system   that  
a

ssociates   SCR   (Selective   Catalytic   Reduction)  
w

ith   a   particle   filter   (FAP)   for   the   treatment   of  
e

xhaust   gases.
Presentation of the SCR system
Using an additive called AdBlue® containing urea, a
 
catalytic
 
converter
 
turns
 
up
 
to
 
85%   of   nitrous o

xides
 
(NOx)
 
into
 
nitrogen
 
and
 
water,   which   are
 h

armless
 
to
 
health
 
and
 
the
 
environment.
The adblue® additive is held in a special
tank
 
located
  under   the   boot   at   the   rear   of  
t

he
 
vehicle.
 
It   has   a   capacity   of   17   litres:   this  
p

rovides
 
a
 
driving   range   of   about   12   500   miles  
(

20
 
000
 
km),
  after   which   an   alert   is   triggered  
w

arning
 
you
 
when   the   reserve   remaining   is  
e

nough
 
for
 
just   1   500   miles   (2   400   km).
During
 
each
  scheduled   service   of   your   vehicle  
b

y
 
a
 
CITROËN   dealer   or   a   qualified   workshop,  
t

he
a
d
blu

e
® additive tank is refilled in order to a
llow
 
normal   operation   of   the   SCR   system.
If
 
the
 
estimated   mileage   between   two   services  
i

s
 
greater
 
than   12   500   miles   (20   000   km),   we  
r

ecommend
  that   you   go   to   a   CITROËN   dealer  
o

r
 
a
 
qualified   workshop   to   have   the   necessary  
t

op-up
 
carried   out.
on
ce the a
dbl
ue
® tank is empty, a s
ystem
 
required
 
by   regulations   prevents  
s

tarting
 
of
 
the
 
engine.
If the SCR

is faulty, the level of
emissions
 
from
 
your   vehicle   will   no  
l

onger
 
meet
 
the
 
Euro   6   standard:   you  
v

ehicle
 
becomes
 
polluting.
In
 
the
 
event
 
of
 
a
 
confirmed   fault  
w

ith
 
the
 
SCR
 
system,   you   must   go  
t

o
 
a
 
CITROËN
 
dealer   or   a   qualified  
w

orkshop
 
as
 
soon   as   possible:   after  
a

 
running
 
distance   of   650   miles  
(

1 100
 
km),
 
a
 
system   will   be   triggered  
a

utomatically
 
to
 
prevent   engine   starting.
10
Checks

222
C4-2_en_Chap10_verification_ed01-2015
C4-2_en_Chap10_verification_ed01-2015
Range indicators
When switching on the ignition, an indicator gives   an   estimate   of   the   distance   that   can  
b

e   travelled   with   your   vehicle   before   engine  
s

tarting   is   automatically   prevented,   once   the  
v

ehicle   starts   using   the   reserve   of   AdBlue
® or
after
 
a
 
fault
 
is
 
detected
 
with
 
the
 
SCR
 
system.
In
 
the
 
event
 
of
 
simultaneous
 
system
 
fault
 
and  
l

ow
a
d
blu

e
® level, the shortest range is the one d
isplayed.
In the event of the risk of non-starting related to a lack of AdBlue®
Range greater than 1 500 miles (2 400 km)
W hen   the   ignition   is   switched   on,   no  
i

nformation   on   range   is   displayed   automatically  
i

n   the   instrument   panel.
Remaining range between 350 and 1500 miles (600 and 2 400 km)
When switching on the ignition, the UREA warning   lamp   comes   on,   accompanied   by   an  
a

udible   signal   and   the   temporary   display   in  
t

he   instrument   panel   of   "NO   START   IN"   and  
a

  distance,   indicating   the   remaining   range  
e

xpressed   in   miles   or   kilometres   before  
e

ngine   starting   is   prevented   -   (For   example  
"

NO START   IN   900   miles"   means   that   "Starting  
w

ill   be   prevented   in   900   miles).
When
  driving,   this   display   appears   every  
1

50 miles   (300   km)   until   the   additive   tank   has  
be

en
 t
opped-up.
Go
  to   a   CITROËN   dealer   or   a   qualified  
w

orkshop   to   have   the   AdBlue
® tank topped-up.
Y
ou
 
can
 
also
 
top-up
 
the
 
tank
 
yourself.
Refer
 
to
 
the
 
"Topping-up"
 
section.
The
 
engine
 
start
 
prevention
 
system
 
r

equired
 
by
 
regulations
 
is
 
activated
 
a

utomatically
 
once
 
the
 
AdBlue
® tank is e
m pt y.
Checks