16 Instruments and warning/indicator lights
authorized Audi dealer or qualified work
shop and have the brake system
inspected.
- Always keep in mind that after several
brake applications, you will need greater
pressure on the brake pedal to stop your
vehicle . Do not rely on stra ined brakes to
respond w ith maximum stopping power
in critical situations. You must a llow for
increased bra king distances. The extra
distance used up by fading brakes could
lead to an acc ident.
::.'!!JC®) Electromechan ical parking brake
The warning/indicator light monitors the
electromechanical parking brake.
If the indicator light. (USA models)/ .
(Canada models) turns on, the park ing brake
was set.
The warning/ind icator light will go out when
the park ing brake is released.
• (USA models) ;a (Canada models) Cau·
tion : Vehicle parked too steep
If the indicator light blinks and the message
appears, there is not enough braking power to
keep the vehicle from rolling. The brakes have
overheated. The vehicle could roll away even
on a small incli ne.
Press brake pedal to release parking brake
To release the parking brake, press the brake
pedal and press the button®> or start driving
with start ing ass ist at the same time
c:> page 79.
Please release parking brake
To release the parking brake manually, press
the brake peda l and press the button®) at
the same time. The parking brake only releas
es automatically if the driver's safety belt is
fastened.
Ill Parking brake!
If the Ill indicator light turns on and this
message appears, there is a parking brake
malfunction. Drive to your authorized Aud i dealer or qualified workshop immediately to
have the malfunction corrected.
,(f. Safety belts
This
warning/indicator light reminds you to
put on your safety belt.
T he . warn ing/ indicator light i llum inates
when the ignition is switched on to remind
the driver and (on USA models on ly) any front
passenger to put on the safety be lt. Addition
ally, an acoustic warning (gong) will also
sound.
For more Information
c:> page 123, Safety
belt warning light.
· 0 Battery
The . warning/indicator light illuminates
when you switch on the ignition and must go
out after the eng ine has started.
• Alternator fault: Battery is not being
charged
If the indicator light turns on and the mes
sage appears, there is a malfunction in the
generator or vehicle electrical system .
Drive to your authorized Audi dealer or quali
fied workshop immediate ly . Because the veh i
cle battery is discharging, turn off all unnec
essary electrical equipment such as the radio.
Seek professiona l assistance if the battery
charge level is too low .
(•] Low battery : Battery will be charged
while driving
If the indicator light turns on and the mes
sage appears, there may be limited sta rting
ability.
If this message turns off after a little while,
the battery charged enough while driving.
If the message does not turn off, have your
authorized Aud i dealer or qualified workshop
correct the malfunction.
