2015 AUDI Q5 ESP inoperative

Opening and closing
Locking and unlocking the vehicle from
inside
Fig. 32 Drive r's door : power lo ckin g sw it ch
• Press the button 0 to unlock the vehicle
~ fig. 32.
• Press the button Qj to lock the vehicle ~.&, .
You will find a power locking switch in each door .
You can
lo ck and unlock the veh icle using the
sw itches in the driver's or passenger's door
¢
fig. 32. You can only lo ck the veh icle using the
switches in the rear doors. If you lock the vehicle
using the power locking switch , please note the
following:
- You cannot open the doors o r the rear lid from
the
outside (increased security, for example
when you are stopped at a red light) .
- The diodes in the power locking switches illumi­
nate when all the doors are closed and locked.
- Front doors: yo u can un lock and open the doors
from the inside by pulling on the door handle.
- Rear doo rs: pull the door handle
once to re­
lease the lock. Pull the hand le
again to open
the door.
- If you have a crash and the airbag is act ivated,
the doors automatically un lock.
A WARNING
- The power locking sw itch works with the ig­
nition off and automatically locks the entire
vehicle when it is actuated.
- On a vehicle locked from the outs ide the
power locking system switch is inoperative.
- Locked doors make it more difficu lt for
emergency workers to get into the vehicle,
which puts lives at risk. Do not leave anyone
behind in the vehicle, especially children.
42
@ Tips
Your vehicle is locked automatica lly at a speed
of 9 mph ( 15 km/h) (Auto locking)¢
page 38.
You can unlock the vehicle again using the
opening function in the power locking system
switch .
Emergency locking of the doors
Each door mus t be locked separately if the pow­
er locking sys tem fails.
Fig. 33 Door : Emerge ncy lo ckin g
An emergency lock is located on the front end of
the passenger's door and the rear doors (only
visible when door is open).
• Take the mechanical key out of the master key
¢page 37 .
• Pull the cover cap out of the opening ¢ fig. 33.
• Insert the key in the inside slot and turn it all
the way to the right (right door) or left (left
door) .
Once the door has been closed, it can no longer
be opened from the outside. The door can be
opened from th e inside by pulling the door han­
dle. If the child safety lock in a rear door is acti­
vated , you must first pull the door handle on the
inside . T hen you can open the door from the out­
s ide .

M N
co
a:
co
,...., \!) ..,.,
N ..,., ,....,
In addition to the setting for the drive r's seat ,
the exterior rear view mirror setting can be stor­
ed and reca lled through seat memory if the veh i­
cle is properly equipped.
Storin g and recallin g se tting s
With the help of the memory buttons 1 and 2
¢ fig. 65 the settings for two different drivers
can be stored and reca lled
r::!> page 65.
The cu rrent settings are also a utomat ica lly as ­
signed to the remote control key being used
when the vehicle is locked . When the vehicle is
un locked, the settings assigned to the remote
contro l key being used are automatica lly recalled .
Turnin g seat m emo ry on and off
If the IO FF I sw itch is depressed, the seat memory
is inoperative . When the Memory function is off,
the LED in the button lights up.
All the stored settings a re retained. We recom­
mend using the
I O FF I sw itch and de activating the
seat memory if the vehicle is only go ing to be
used
temporarily by a driver whose settings are
not going to be stored .
Storing and recalling settings
Applies to vehicles: with seat memory
Storing settings
~ Adjust the driv er's seat.
~ Adjust the two exter ior mirrors.
~ Press the !SET I button. The light in the button
will come on.
~ Now p ress a memory button (III or~). If the
stor ing procedure is correct, a confirmation
tone w ill sound .
Recall ing setting s
~ If the dr iver 's door is open and the ignit ion is
switched off, tap the correspond ing memory
button br iefly .
~ If the dr iver's door is closed or the ignit ion is
switched on, p ress the approp riate memo ry
button until the s to red pos ition is rea ched .
Successful storage is confirmed audibly and by
the light in the
ISET I button illum inat ing
r::!> page 64, fig . 65.
S eat s and stor age
When the vehicle is lo cked , the current settings
are stored and assigned to the remote contro l
key . But the settings stored on memory buttons
1 to 2 are not deleted . They can be recalled at
any time . When the vehicle is
unlocked , the set­
t ings assigned to the remote control key a re re ­
stored .
If your vehicle is driven by other persons using
your remote control key, you should save your in­
dividua l seat position on one of the memory but ­
tons . You can recall your settings again simply
and conveniently by p ress ing the corresponding
memo ry butto n. When the vehicle is locked,
these settings are automatica lly re-assigned to
the remote control key and stored .
& WARNING
- For safety reasons, the seat setting can only
be recalled when the vehicle is stationary -
otherwise you risk hav ing an accident.
- In an emergency the recall proced ure can be
cancelled by pressing the
I OFF I switch or by
tapp ing of the memory buttons.
Activating remote control key memory
Applies to vehicles: wit h seat memory
To assign the dr iver 's seat settings to the remote
control key when locking the vehicle, the function
must be activated in the radio or MMI*.
~ Select: ! CAR I function button > Seat adju st­
ment > Dri ver's seat > Key mem. p ro fi le > On .
Or
~ Select: !CARI function button> Car sy ste ms*
cont ro l butto n > Vehicl e se tting s > Seats >
Driver 's seat > Remote control ke y> On .
(j) Tips
If you do not want anothe r driver's sett ings to
be assigned to the remote control key, switch
off the memory function usi ng the rad io or
M MI* or t he
I OFF I button r::!> page 64.
65