M N ai
"' ~
-"' "' N
"' .....
different tire speeds. For this rea
son, in case of emergency, only
use a spare tire* that is the same
circumference as the regular tires.
A WARNING -
-Only use tire/rim combina
tions and suitable wheel bolts
that have been approved by
Audi. Otherwise, damage to
the vehicle and an accident
could result.
-For technical reasons, it is not possible to use tires from oth
er vehicles - in some cases,
you cannot even use tires from
the same vehicle model.
-Make sure that the tires you select have enough clearance
to the vehicle . Replacement
tires should not be chosen
simply based on the nominal
size, because tires with a dif
ferent construction can differ greatly even if they are the
same size. If there is not
enough clearance, the tires or
the vehicle can be damaged
and this can reduce driving
safety and increase the risk of
an accident.
-Only use tires that are more
than 6 years old when abso-
Wheels
lutely necessary and drive
carefully when doing so.
-Do not use run-flat tires on your vehicle . Using them when
not permitted can lead to ve
hicle damage or accidents.
-If you install wheel covers on
the vehicle, make sure they al low enough air circulation to
cool the brake system. If they
do not, this could increase the
risk of an accident.
Tire wear/damage
Fig. 205 Tir e profi le : Treadwear indica
tor
Tire wear
Check the tires regularly for wear.
-Inflation pressure that is too low
or high can increase tire wear
considerably .
-Driving quickly through curves,
rapid acceleration and heavy
braking increase tire wear.
-Have an authorized Audi dealer or authorized repair facility
243
...
M N
co
a:
co
,...., \!) ..,.,
N ..,., ,....,
also reduces fuel efficiency and tire tread life,
and may affect the vehicle's handling and stop
ping ability .
Please note that the TPMS is not a substitute for
proper tire maintenance, and it is the driver's re
sponsibility to maintain correct tire pressure,
even if under-inflation has not reached the level
to trigger illumination of the TPMS low tire pres
sure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the sys
tem is not operating properly. The TPMS mal
function indicator is combined with the low tire pressure telltale . When the system detects a
malfunct ion, the telltale will flash for approxi
mately one minute and then remain continuously
illuminated. This sequence will continue upon
subsequent veh icle start-ups as long as the mal
function exists.
When the malfunction indicator is illuminated,
the system may not be able to detect or signal
low tire pressure as intended. TPMS malfunctions
may occur for a variety of reasons, including the
installation of replacement or alternate tires or
wheels on the vehicle that prevent the TPMS
from functioning properly. Always check the
TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure
that the replacement or alternate tires and
wheels allow the TPMS to continue to function properly.
Wheels
If the Tire Pressure Monitoring System
indicator appears
Appl ies to vehicles : wi th t ir e p ress ure mo nito rin g system
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too low
or if there is a system malfunction.
Fig. 208 Instrument cluster: i ndicator light with message
Using the ABS sensors, the tire pressure monitor
ing system compares the tire tread circumference
and vibration characteristics of the individual
tires .
If the pressure changes in one or more
tires, this is indicated in the instrument cluster
display with an indicator light
RIJ and a message
¢fig. 208. If only one tire is affected, the loca
tion of that tire will be indicated.
The tire pressures must be stored in the Infotain
ment system again each time the pressures
change (switching between partial and full load
pressure) or after changing or replacing a tire on
your vehicle ¢
page 254. The tire pressure moni
toring system only monitors the tire pressure you have stored. Refer to the tire pressure label for
the recommended tire pressure for your vehicle
¢ page 245, fig . 207.
Tire tread circumference and vibration character
istics can change and cause a tire pressure warn
ing if:
- the tire pressure in one or more tires is too low .
- the tire has structural damage.
- the tir e was replaced or the tire pressure
changed and it was not stored again
c:!;> page 254.
-the collapsible spare* tire is installed.
253
M N
co ~ co
rl I.O
"' N
"' rl
Emergency assistance
Vehicle jack, vehicle tool kit and collapsible spare
tire
Onboard tool kit and vehicle jack
The vehicle tools ond vehicle jack* are stored in
the luggage compartment under the floor cover.
Fig. 209 Luggage compartme nt: on board tool kit and vehi·
cle jack
The vehicle jack* is stored under the on board tool
ki t¢ fig.
209.
Hybrid drive*: the storage location of the on
board too l kit varies ¢
page 105.
The on board tool kit includes:
- Hook for removing wheel covers*
- Plastic hook to remove wheel bolt covers*
- Alignment p in for cha nging wheels
- Wheel bolt wrench
- Folding chocks
- Screwdriver w ith reversible blade
- Socket (removable Torx socket)*
- 10 x 13 open ended wrench (for disconnecting
the battery cables)
- Towing eye
Befo re storing the jack*, make sure it is wound
back down as far as it will go.
A WARNING
Improper use of the vehicle jack* can cause
ser ious personal injuries.
- Never use the jack* supplied with your Audi
on another vehicle, particularly on a heav ier
-
Emergen cy assistance
one. The jack * is only suitable for use on the
veh icle it came with.
- Using a bumper jack to raise the vehicle will
damage the bumper system. The jack may
slip, causing injury.
- Never support your vehicle on c inder b locks,
bricks or other objects. These may not be
able to support the load and could cause in·
jury when they fa il.
- Never start or run the engine while the vehi
cle is supported by the jack*.
- If you must work under the vehicle, always
use safety stands specifically designed for
this purpose.
- Never use the hexagonal socket in the han
dle of the screwdriver to loosen or tighten
the wheel bolts.
- Always make sure the inflatable spare tire*
and even a flat tire are secured in place and
not loose, otherwise they could fly forward,
causing personal injury to passengers in the
veh icle in an acc ident or sudden maneuver.
(D Tips
Some of the on board items listed above are
provided on certain models only or are option
al extras.
Folding chocks
The folding chocks are part of the on board tool
kit.
--.. ,..
Fig. 210 Open ing foldi ng chock s
To use the chocks, you first have to rais e the sup ·
port plate r::!,>
fig. 210 (!) and then i nsert the lock
ing plate with the two "tabs" into the e longated
holes in the base pl ate@¢
A. .,.
255
Emergency assistance
_& WARNING
- The chock cannot fulfil its funct io n and may
lose its stability if the "tabs" on the support
plate are not inserted correctly into the
elongated holes in the base plate. If th is
happens, the vehicle may start to
move
wh ile a wheel is being changed .
- Never use the folding chocks if they are
damaged o r if they have not been assem
bled correct ly.
Removing bass box
Applies to veh icles: w ith bass box
Before the inflatable spare tire* can be taken
ou t, the bass box must be removed.
F ig . 211 Spare whee l well: Ba ss box
Removing bass box
" Lift up the cargo floor using the hand le .
" Squ eeze the lock ing tabs
q fig. 211 (D of the
con nector.
" Disconne ct the connector @and place the lead
to one side .
"T urn the large screw co unter -clockwise.
" Carefu lly remove the bass box.
Installing bass box
" Carefully place the b ass box in t he wheel. The
inscription " FRON T" on the bass box mus t face
forward .
" Reconnect the connector that was removed .
" Secure the bass box with the large screw.
" Fo ld the cargo floor back down.
256
Inflatable spare tire
Applies to vehicles: with inflatable spare tire
The inflatable spare tire expands to its full diam
eter when it is inflated .
Fig. 212 In flatable spa re tir e with compressor
Removing inflatable spare tire
" Lift up the cargo floo r using t he h andle .
" Remove the dirt tray .
" Tu rn the large screw
q fig . 212 co unter -clock-
w ise .
" Remove the bass box as required
q page 256 .
"Take out the inflatable spare tire.
" Always store the vehicle tool kit, the jack* and
the replaced t ire in the luggage c ompa rtment
q page 140.
Stowing the inflatable spare tire
" Release the air by unscrewing the valve stem.
" Screw the
valve stem back in afterwards.
" Wait a few hours befo re p lacing the wheel in
the spare wheel well
9 & .
"Insta ll the bass box as required qpage 256.
" Sec ure t he wheel with the large screw .
" Place the dirt tray back in.
" Fold the cargo floo r ba ck down .
After using the inflatable spare wheel
The inflatab le spare tire can be re-used as lo ng as
i t is not damaged and is not worn down to the
tread wear indicators
q &, .
When you let the a ir out of the inf latab le spare
t ir e, it does not assume its folded shape aga in for
several hours. Until then, it ca nnot be placed
back in the spare wheel we ll and stowed se cu rely . .,.
M N
co ~ co
rl I.O
"' N
"' rl
Left cockpit fuse assignment
Fig. 224 Left side of the cockpit: fuse panel with plastic
clip
Fuse panel @ (black )
No. Equipment
1 Dynamic steering
2 ESC control module
A/C system pressure sensor, electrome-
3 chanical park
ing brake, Homelink, auto-
matic dimming interior rearview mirror, air
quality/outside air sensor, ESC button
5 Sound
actuator/exhaust sound tuning
6 Headlight range contro l/cornering light
7 Headlight (cornering light)
Control modu les (e lectromechanical park-
8 ing brake, shock absorber, quattro Sport,
trailer hitch), DCDC converter
9
Adaptive cruise control or high voltage
battery (hybrid drive)
11 Side assist
12 Headlight range control, parking system
13 Airbag
14 Rear w iper
15 Auxi
liary fuse (instrument panel)
1 6 Auxiliary fuse terminal 15 (engine area) Fuses
and bulbs
Fuse panel @ (brown)
No . Equipment
1 Electric exhaust door
2 Brake light sensor or brake pedal
move-
ment sensor (hybr id drive)
3 Fuel pump
4 AdBlue pumps
or brake booster power
supply (hybrid dr ive)
5 Left seat heating with/without seat venti-
lation
6 ESC
7 Horn
8 Left
front door (window regulator, central
locking, mirror, switch, lighting)
9 Wiper motor
10 ESC
11 Left
rear door (window regu lator, switch,
lighting)
12 Rain and light sensor
Fu
se panel © (re d)
No . Equipment
3 Lumbar support
4 Dynamic steering
5 Climatized cupholder
6 Windshie
ld washer system, headlamp
washer system
7 Vehicle electr ical system control module 1
8 Vehicle e
lectrica l system control module 1
9 Panorama sunroof
10 Vehicle e lectrica l system control module 1
11 Sun shade (pano rama sunroof)
12 Anti-theft a
larm system
267
Emergency situation s
When it is no longer needed, unscrew the towing
loop and put it back into the vehicle toolkit . Be
sure to have the tow ing loop stored in the vehicle
at all times .
When re -insta lling the cover be su re to first in
sert the tabs on the cover into the retainers near
the radiator grille . T hen install the other side of
the cover and push it into the retainers
¢f ig. 229 .
The appearance of the cover var ies from the illus
tration for some model versions .
A WARNING
If the towing loop is not screwed in as far as it
w ill go, the thread can pu ll out when the veh i
cle is towed -potential risk of an accident .
(D Note
The cover is attached to the bumper with sev
eral hooks . Do not use excessive force when
remov ing the cover to avoid damaging it.
Rear towing loop
On vehicles without a factory-installed trailer
hitch*, the threaded hole for the towing loop is
on the right side of the rear bumper .
Fig. 2 31 Rear b umper: Cove r
274
N
N
---- ~ a, al
F ig . 232 Rea r bumpe r: S crew ing in t owing loop
Vehicles with a towing loop
~ Remove the tow ing loop from the vehicle tool
ki t
¢ page 255.
~ Press t he cover i n by app lyi ng short strong
pressu re to the bottom pa rt to release it from
t he bumper
¢fig . 231.
~ Sc rew the towing loop t ightly into t he threaded
hole as far as it will go¢
fig. 232.
Vehicles with a trailer hitch*
~ In sta ll the tra ile r hitch.
~ Attach the tow ing bar or the tow ing ca ble to
the t ra iler hi tch .
Unscrew the towi ng loop again afte r use and i n
st all the cover in the b um pe r. Retur n the towing
l oop to the vehicle tool kit . B e sure to have the
tow ing loop stored in the vehicle at all times .
~ WARNING
-If the towin g loop is not screwed in as fa r as
it will go, the thread can pull out when the
veh icle is towed - potent ial risk of an acci
de nt.
- If your vehicle has a
tra iler hitch* only use a
specia l towing bar to p revent damag ing t he
ball hitch. These towing bars have been spe
cially designed for trailer towing h itches .
- If your vehicle has a
tra iler hitch* use on ly
special towing cables .
Index
Tire Mobility System (tire repair set)
258
Tire pressure monitoring system Loss of air pressure . . . . . . . . . . . . . . . . . . . 16
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Low aspect ratio t i res . . . . . . . . . . . . . . . . . 251
Repair set . . . . . . . . . . . . . . . . . . . . . . 105, 258
Replacing . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Service life 243
Tire pressure . . . . . . . . . . . . . . . . . . . . . . . . 245
Tire pressure monitoring system . . . 252, 2S3
T ire pressure table . . . . . . . . . . . . . . . . . . . 246
Treadwear ind icators . . . . . . . . . . . . . . . . . 243
Unidi rectiona l.... .. ..... ... .. .. .. ... 237
Uniform tire quality grading .... .. .. ... 251
T ires and whee ls
Glossary of t ire and load ing terminology . 23 7
Tire pressure monitoring system . . . . . . . . 16
Tires and vehicle load limits . . . . . . . . . . . 247
Tool kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2S5
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Torn or frayed sa fety be lts 1
46
Tow ing
Fr ont eyelet . . . . . . . . . . . . . . . . . . . . . . . . 273
Rear eye let . . . . . . . . . . . . . . . . . . . . . . . . . 274
Tow tr ucks . . . . . . . . . . . . . . . . . . . . . . . . . 273
Towing a tra iler
P ark ing system . . . . . . . . . . . . . . . . . . . . . . 134
TPMS (tire pressure monitor ing system) . . . 253
T railer mode . . . . . . . . . . . . . . . . . . . . . . . . . 204
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Trailer towing Operating instructions . . . . . . . . . . . . . . . . 205
Techn ica l req uirements . . . . . . . . . . . 204, 205
Tong ue load . . . . . . . . . . . . . . . . . . . . . . . . 205
Trailer turn signa l assemb ly
Warn ing/ indicator lights . . . . . . . . . . . . . . . 16
Transm ission
Malfunct ion (ind icator light) . . . . . . . . . . .
127
Transport Canada . . . . . . . . . . . . . . . . . . . . . 14 3
Travel mode . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Trip computer Fue l consumption . . . . . . . . . . . . . . . . . . . . 22
M ileage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Sing le- trip memory . . . . . . . . . . . . . . . . . . . 23
Total -trip memo ry . . . . . . . . . . . . . . . . . . . . 23
Trip odometer . . . . . . . . . . . . . . . . . . . . . . . . . 13
296
Trunk
refer to Rear lid . . . . . . . . . . . . . . . . . . . . . . 44
Turn signals. . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Wa rning/indicator lights . . . . . . . . . . . . . . . 16
u
ULSD No. 2 (Diese l fue l) . . . . . . . . . . . . . . . . 215
Unfastening safety belts . . . . . . . . . . . . . . . 149
Unif orm tire quality grading . . . . . . . . . . . . 251
U nlocking
Power locking sw itch . . . . . . . . . . . . . . . . . . 42
Rea r lid/trun k lid . . . . . . . . . . . . . . . . . . . . . 43
Remote contro l key . . . . . . . . . . . . . . . . . . . 40
U si ng the mec hanical key . . . . . . . . . . . . . . 41
Use of jumper cab les . . . . . . . . . . . . . . . . . . 272
V
Vanity mirror . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Vehicle Care/cleaning . . . . . . . . . . . . . . . . . . . . . . . 208
Out of service . . . . . . . . . . . . . . . . . . . . . . . 212
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Vehicle control modules . . . . . . . . . . . . . . . . 190
Vehicle identification label . . . . . . . . . . . . . . 277
Vehicle Identification Number (VIN) . . . . . . 277
Vehicle jac k . . . . . . . . . . . . . . . . . . . . . . 255, 262
Vehicle tool kit . . . . . . . . . . . . . . . . . . . . . . . 105
Ventilat ion . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
w
Warning/ind icator lights
A irbag sys tem . . . . . . . . . . . . . . . . . . . . . . . 16
An ti- lock b rake system (ABS) . . . . . . . . . . . 17
Brake system . . . . . . . . . . . . . . . . . . . . . . . . 18
Cruise cont ro l . . . . . . . . . . . . . . . . . . . . . . . . 17
E lectromechanica l parking brake . . . . . . . . 18
E lectronic power control . . . . . . . . . . . . . . . 15
Electronic Stabilization Contro l (ESC) . . . . . 15
G low p lug system . . . . . . . . . . . . . . . . . . . . 15
Hig h beam . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Malfunction Ind icator Lamp (M IL) . . . . . . . 17
Safety be lt . . . . . . . . . . . . . . . . . . . . . . . . . . 17
T ire pressure mo nitoring system . . . . . . . . 16
T rai ler turn signal assembly . . . . . . . . . . . . 16
Turn signals . . . . . . . . . . . . . . . . . . . . . . . . . 16