
M N
" > co ,...., \!) 1.1"1 ,...., 1.1"1 ,....,
~- Steering lock
• Do not drive vehicle : ste ering defective
There is a malfunct io n in the electron ic steer
in g lock . You canno t turn the ign ition on .
Do
not tow your vehicle beca use it ca nnot be
steered. See an authorized Aud i dea ler or a u
thor ized Audi Se rv ice Facility for assistance .
Ill Steering lock: system fault! Please con
tact Service
There is a malfunct ion in the electron ic s teer
ing lock .
Dr ive to an a uth o rize d Aud i de aler or auth or
iz ed A udi Service Faci lity immed iate ly to h ave
the ma lf u nction co rrec ted.
~ WARNING
Do not tow your ve hicle when t he re is a
ma lf u nction in t he e lectronic steering lock
- this increases t he risk of an acc ident.
-.e Engine start system
-
• Engine start system malfunction. Please
contact Service
Do not switch the ignit io n off because you
may not be able t o switch it on aga in.
D rive to an a uth o rized Aud i dea le r o r a uth or
ized A udi Service Facility immed iate ly to have
the ma lfunction co rrected.
l3 Engine start system malfunction . Please
contact Service
Th ere is a malfunct io n in th e engi ne s tart ing
s y st em.
- Vehicles with an ignition <=>
page 77, Auto
matic start malfunction
- Vehicles with a conve nience key
¢ pag e 79, Automatic start malfunction
Drive to an authori zed Aud i dea ler or a uth or
i zed A udi Service Facility immed iate ly to have
the ma lfunction corrected .
Instruments and indicator lamps 21
~ Engine
• Engine stopped: brake servo and power
steering not pos sible
T he re is a malfunction in the eng in e or i n the
fuel sup ply sys tem .
More force is needed to steer and brake t he
moving veh icle when the eng ine is stopped . If
t h e ve hicle is rolli ng, try to stop i t caref ully on
the side of the ro ad away fro m moving t raffi c.
S ee a n author ized Audi dealer or au thor ized
A udi Serv ice F acili ty for a ssistance .
A WARNING
If th e engine stops w hile driving, you will
need to use mo re fo rce to brake the vehi
cle. T his increases the r isk of an accident .
There w ill still be power steer ing i f th e ig
n it ion is switched on while t he ve hicle is
rolling and there is sufficie nt battery
cha rge . Ot herwise, you must use greater
fo rce when steer ing.
r;,/ fr, Electronic stabilization control
(ESC) and(@)) anti-lock braking system
(ABS)
If the DJ ind icator light blinks while driving,
the ESP or ASR (anti-slip regulation) is active ly
regulating.
If the
DJ ind icator light tu rns on, the system
has switc hed the ESC off . In t his case, yo u can
switch the ign ition off and then on to switch
the ESC on aga in. The ind icator lig ht tu rns off
whe n the system is fu nctioni ng fu lly.
Stabilization control (ESC): sport . Warning!
Restricted stability
If the B ind icator light tu rns on, ES C sport
mode was switched on using the
I" OF F! bu t
ton <=>
page 189. You can t urn the ESC on
again by press the
I ~ O FF ! button again.
Stabilization control (ESC): off . Warning!
Restricted stability
If t he II in dica tor light tu rn s on, the ESC was
rest ricted or swi tc h ed o ff usin g th e
i .i, OFF I but to n <=> page 189. T he message ESC .,..
•

22 Instruments and indicator lamps
OFF also appears. You can turn the ESC on
again by press the
I~ O FF I button again.
The system switches on when the ignition is
switched on. The
fl indicator light turns off
when the system is functioning fully.
Stabilization control (ESC) malfunction! See
owner's manual
Stabilization control (ESC/ABS) malfunc
tion! See owner's manual
ABS malfunction! See owner's manual
If the J..fd indicator light and the ABS indicator
light
ml (USA models)/ ii] (Canada models)
turn on and this message appears, there is a malfunction in the ABS system or electron ic
d ifferential lock. This also causes the ESC to
malfunction. The brakes still function with
their norma l power , but ABS is not active .
Drive to an authorized Aud i dea ler or author
ized Audi Service Facility immediate ly to have
the malfunction corrected .
A WARNING
If the . (USA models) I. (Canada mod
els) brake system indicato r light turns on
together with the ABS and ESC indicator
lights, the ABS/ESC regulating function
may have failed . Functions that stabilize
the vehicle are no longer avai lab le . This
could cause the vehicle to swerve, which
increases the risk that the vehicle will
slide. Drive carefully to the nearest author
ized Aud i dealer or authorized Aud i Service
Facility and have the ma lfunction correct
ed .
(D Tips
For addit ional information on ESC and
ABS, refer to<=:> page 188.
BRAKE/ {01 Brake pads
1111 (USA models ) / llJ (Canada models)
Brake pads!
l) - : USA mod els onl y
If the warning light illuminates, immediate ly
contact your authori zed Audi dealer or quali
fied workshop to have all brake pads inspect
ed. Both sets of brake pads on an axle must
always be replaced at the same t ime.
A WARNING Co....- -
Driving with bad brakes can cause a colli
sion and ser ious personal injury.
- If the warn ing light
llJ or the warning
light
llll1l with the message Brake
pads!
comes on in the instrument cluster
disp lay, immediately contact you r au
thorized Audi dealer or qualified work
shop to have all brake pads checked or
replaced if necessary.
' ·~ Hill hold
Hill hold assist: unavailable
If
the 111 ind icator light tu rns o n and this
message appears, hill hold is not available.
111 Manual control!
If this message appears, press the brake ped
al.
Continue driving with the help of the parking
brake.
<=:> page 82
EPC Engine control (gasoline engine)
App lies to vehicles : wit h gasoli ne e ngi ne
If the (3i indicator light turns on there is a
malfunction in the engine control.
Drive slowly to your authorized Audi dea ler or
qualified repair facility to have the engine
checked.
If the (3i indicator light turns on when you
start the engine, there is an automatic start
malfunction . To start the engine, follow these
steps:
- Vehicles with a mechanical ignition
<=:> page 77, Automatic start malfunction

M N ,....
> co ,...., \!) ..,.,
,...., ..,., ,....,
-Vehicles with a conven ience key
¢ page 79, Automatic start malfunction.
a System indicator light (MIL)
The system indicator light (MIL) is part of the
On Board Diagnostic system (OBD II). The
¢4 symbol turns on when the ign it ion is
switched on and turns off aga in once th e en
g ine is started an d running at a st eady idle
speed. This ind icates that the M IL is funct ion
ing cor rectly .
The indicator light turns on if there is a mal
function in the engine electronics . See an au
thor ized Audi dealer or authorized Audi Se rv
ice Facility to have the malfunction co rrected.
The system indicator light (MIL) may turn on
if the fuel fille r cap is not closed correctly
¢ page 212.
For addit ional i nformation, refer to
¢ page 29.
!?) Engine speed limitation
Appl ies to vehicles: with engine speed limitation
(Ill Max. engine spee d: XXXX rpm
The engine speed is automatically lim ited to
the speed disp layed in the driver information
system. This protects the engine from over heat ing.
The engine speed limitation deactivates once
the eng ine is no longer in the cr it ica l tempera
ture range and you have released the accelera
tor peda l.
If the engine speed limitation was activated by an eng ine control malfunction, the~ indi
cator light also turns on. Make s ure the en
g ine speed does not go above the speed dis
p layed, for examp le when downsh ifting. Drive
to an author ized Audi dealer or author ized
Aud i Service Fac ility immediately to have the
malfunct ion corrected .
'l'.::r., Engine oil level (min.)
II Check oil level
In strum ent s an d indicator lamp s 23
You may cont inue driving for the time be ing.
Check the oil leve l as soon as possib le
¢ page 217.
-If the eng ine o il level is too low, add eng ine
oil ¢page218 .
-If the eng ine o il level is correc t and the indi
cato r light still turns on, drive at low engine
speed to the nearest authorized Audi dealer
or qualified repair facility.
~"" Engine oil sensor
• Oil le vel sensor: system fault!
The sensor to check the engine oi l level has
failed. Drive to an author ized Audi dealer or
authorized Aud i Service Fac ility immediately
to have the malfunction corrected.
(D Note
Refe r to the description in the Owner's
M anual
¢ page 218 and ¢page 218,
Adding engine oil
liD Please refuel
If the indicator light turns fi rst turns on and
th is message appears, the tank conta ins the
follow ing amount of fue l:
- Front whee l drive: approximate ly 1. 8 ga l
lons (7 liters)
-All wheel drive: approximately 2 .2 gallons
(8 . 5 liters)
liD Plea se refuel immediately
If the indicato r light turns on the message ap
pears, the fue l tank is a lmost empty . Refuel
t h e ve hicl e immed iate ly.
liD Fuel tank malfunction! Please contact
Service
If the indicator light turns on and this mes
sage appears, there is a malfunct ion in the
ta nk system .
•

24 Instruments and indicator lamps
Drive to an authorized Audi dea le r o r author
ized Audi Service Facility immediate ly to have
the malfunction corrected.
@ For the sake of the environment
Fuel should never enter the sewer system
or come into contact with the ground.
@ Tips
More info rmation on refueling is available
on page
i:!>poge 211.
~ Washer fluid level
1- ) Please add washer fluid
Fill the washer fluid with the ign ition switched
off ¢
page 22 7.
6 Windshield wipers
m Windshield wiper: system fault!
There is a malfunct ion with the w indshield
wipers.
Drive to an authorized Aud i dealer or author
ized Audi Service Facility immed iate ly to have
the ma lf uncti on corrected .
~ Defective light bulb warning
Applies to vehicles: with driver informatio n system
If the J:i indicator light turns on, a bulb has
failed. The message indicates the location of
the bulb .
Replace the bulb immed iately.
Vehicle lights: system fault!
There is a malfunction in the headlights or
light switch . Drive to an authorized Audi deal
er or authorized Audi Service Facility immedi
ately to have the malfunction corrected.
A WARNING
-
- Light bulbs are under pressure and can
exp lode when bulbs are replaced -risk of
injury. -
With gas-discharge lamps* (xenon head
lights), the high-voltage component
must be handled appropriately. Other
wise, there is a risk of fatal injury .
i,ID Dynamic headlight range control
system
Applies to vehicles: with Xenon lights
II Headlight range control system: system
fault!
There is a malfunction in the dynamic head
li ght range control system, which may cause
glare for other drivers.
Drive to an authorized Audi dealer or author
ized Audi Serv ice Facility immediately to have
the malfunction corrected.
go Audi adaptive light
Applies to vehicles: with Audi adaptive light
&fl Audi adaptive light: system fault!
There is a malfunction in the adapt ive lights .
The headlights still function .
Drive to an authori zed Audi dealer or author
ized Audi Service Facility immediately to have
the malfunction corrected .
@:> Light/rain sensor
Applies to vehicles : with light/rain sensor
El Automatic hea dlights: system fault!
t!I Automatic wipers: system fault!
The light/rain sensor is not working.
For safety reasons, the low beams are turned
on permanently with the switch in
AUTO. You
can continue to turn the lights on and off us
ing the light switch. You can still contro l all
wiper funct ions that are independent of the
rain sensor .
Drive to an authorized Audi dealer or author
ized Audi Service Facility immediately to have
the malfunction corrected .

M N ,....
> co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Q Adaptive dampers
Applies to vehicles: with Audi drive select
R Suspen sion : system fault!
There is an adaptive damper malfunction .
Drive to an aut horized Aud i dea le r or a uthor
i zed A udi Service Facility immed iate ly to have
the ma lfunction corrected .
¢¢Turn signals
If the B or B ind icator light b links, a turn
sig nal is tu rned on . If both indica to r li ghts are
b linki ng , the eme rgency flashers a re on .
In an indicator light bli nks twice as fast as
usual then a b linker bu lb has fai led. Carefully
d rive to an au thorized Aud i deale r or autho r
iz ed A udi Service Fac ility i mmed iate ly to have
the m alfu nction co rrec ted .
@ Tips
For mo re i nfo rmation on the tur n sig nals,
refer to
9 page 5 1.
Instruments and indicator lamps 25
•

26 Driver information system
Driver information
system
Overview
Ap plies to vehicles: with d river in format ion syste m
Fig. 9 Instrument cluster: driver informat ion system
(example)
Data is automatically recorded, processed and
d isplayed in the driver information system.
Sett ings for special equipment can be adjust
ed in the MMI. Select the
I MENU ! button> Car
> Systems* menu control button .
Introduction
The driver information system is controlled
through the multifunction steering wheel
c::;, page 2 7, fig. 10.
The driver information system c;, fig. 9 con
tains the following information:
- @ Tab (register)
-@ Vehicle information
-© Status line (se lector lever posi tion, out-
s ide temperaturec:=;,
page 11)
-@ On-board compute r
The following functions are possible, depend ing on vehicle equipment: @
®
First tab ~ Vehicle
functions:
On-board computer, time, date
c:=;,page 27
Efficiency program
c:=;,page28
Digital tachometer
Assistance systems
Audi adaptive cruise control*
¢page87
Audi active lane ass ist*
¢page99
Reduced display
Second
tJ. 6 Driver messages and ind ica-
tab tor lights
c,,..c Service interval display
c:=;,pag
e 13
Third fl I I Audio/ i»> radio
tab
F ourth .,..,.
Telephone*
tab
Fifth tab
~I~ Navigation*
The second tab is only visible if at least one in
dicator light or message is shown or if that
system is switched on .
Display
In the driver information system you will see:
Radio station or CD
Time and date
¢page 10
Odometer, trip odometer ¢page 11
Outside air temperature ¢page 11
Service interval display c::;, page 13
Indicator lights and messag-¢page 13
es
Digital tachometer
Cruise control system
c:=;,page 85
Speed warn ing c:=;,page 84
Selector lever positions c::;, page 110
On-board computer display c::;, page 27 ...

....,
N
r--. > co
rl I.O
"' rl
"' rl
Other equipment
Applies to vehicles: with driver information system
F ig. 13 Instrument cluster : other equ ipment (exam
p le)
~ Turn the menu thumbwheel@Qpage 27,
fig. 10 while in the efficiency program until
t h e other eq uipme nt affect ing consump tion
appears .
Other equipmen t that is curren tly affecting
fuel cons umption is listed in t he eff iciency
p rog ram. The display shows up to three other
items of equipment @. The equipment using
the most f uel is listed first . If more than three
items using fue l are switched on, the equip
ment that is currently using the most fuel is
d isplayed .
A scale @ also shows the current total con
sumpt ion of all other equipment.
Fuel economy messages
App lies to vehicles: with driver information system
Fi g. 14 Instrument cluster : economy tip (examp le)
F ue l economy messages are disp layed when
fuel consumption is inc reased by certain con
ditions. If yo u follo w these fuel economy mes
sages, you can reduce your vehicle's consump
tion of fuel. The messages appear automati cally and are o nly displayed in the eff ic iency
Dr iver in formation system 29
program . The fue l economy messages t urn off
automatica lly after a certain period of time.
~ To tu rn an e conomy me ssage off immed iate
ly a fter it appea rs, press any bu tton on the
m ultifunction stee ring wheel.
(D Tips
- O nce yo u have turned a f uel economy
mess age off, it will o nly appear ag ain a f
ter yo u turn the ign ition on again.
- Th e fu el economy mess ages are no t dis
played in every instance, but rather in in
tervals over a period of time .
On-Board Diagnostic
system (OBD)
System indicator light (MIL)
The system indicator ligh t (M IL) ¢.§ in the in
str ument cl uster is part of the On Board Diag
nostic System (OBD II).
T he warni ng/i ndicator light t urns on when the
ignition is sw itched on and t urns off once the
engine is sta rted and is runn ing in id le at a
stab le speed. This indicates that the MIL is
funct ioning correct ly.
If the light does not turn off after sta rting
the engine
or turns on while driving, t his may
indicate there is a ma lfunction in the engine.
If the indicator turns on, the cata lytic convert
er may be damaged .
Drive
with reduced engine performance
(avoid high speeds for extended periods of
time and/or fast acceleration) and have the
malfunction corrected. See an authorized Audi
dealer or author ized Audi Service Facility.
The indicator may turn on if the electronic
speed limiter is faulty. For addit ional informa
tion, refer to Q
page 30, Electronic speed
limiter* .
The MIL may also turn on if the fuel filler cap
is not closed cor rectly
q page 212.

30 Driver in formation sy ste m
On-Board Diagnostics
Fig. 15 Lo cat ion of D ata Link Connec tor (D LC)
On-Board Diagnostics monitors the compo
nents of your emission con trol system. Each
monitored component in your engine system
has been assigned a code . In case of a mal
function, the component will be ident ified
and the fau lt stored as a code in the control
module memory .
The MIL light may also illuminate if there is a
leak in the on-board fue l vapor recovery sys
tem.
If the lig ht illuminates after a refuelling ,
stop the veh icle and ma ke sure the fuel filler
cap is proper ly closed
<> page 212.
I n o rder to make an accurate d iagnosis, the
stored data can only be displayed using spe
cia l diagnostic eq uipment (gener ic s can tool
for OBD).
I n o rder to connect the special diagnostic
equipment, push the p lug i nto the Data Link
Connector (DLC). The DLC is located to the
right of the hood release¢
fig. 15 .
Your author ized A udi dealer or a qualified
service station can interp ret the code and pe r
form the necessary repa ir .
A WARNING
Do not use the diagnostic con nector for
personal use. Incorrect usage can ca use
ma lf u nctions, which can increase the risk
of a coll ision!
-
Electronic speed limiter*
Applies to vehicles: with electronic speed limiter
Your vehicle may be factory eq uipped w ith
t ir es that are rated fo r a max imum speed of
130 mph (210 km/h) . This is less than the
maximum speed of your vehicle. To reduce the
risk of sudden tire fa ilure and loss of contro l if
the vehicle is operated at excessive speeds,
your vehicle a lso has an electronic speed limit
er . The elec tronic speed limi ter prevents your
vehicle from going faster than the tire speed rating . For more information ¢
page 248.
If the engine control unit receives faulty veh i
cle road speed signa ls, the Malfunction Ind i
cator Lamp (M IL)
¢..fi will illuminate . If this
occurs, contact the nea rest authorized A udi
dealer for assistance .
A WARNING
Always observe the posted speed lim its
a nd adjust your speed to suit prevai ling
road, traffic and weather cond itions. Never
d rive your vehicle faster than the maxi
mum speed rating of the tires installed. -