2014 TOYOTA AYGO Owners Manual (in English)

Page 313 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 5
313 5-2. Steps to take in an emergency
When trouble arises
AYGO_WE_99G80E
Stop the vehicle immediately.
The following warnings indicate the possibility of damage to the
vehicle that may lead to a

Page 314 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 314 5-2. Steps to take in an emergency
AYGO_WE_99G80EThe following warning indicates the possibility of damage to the
vehicle that may lead to an accident. Immediately stop the vehicle
in a safe pl

Page 315 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 5
315 5-2. Steps to take in an emergency
When trouble arises
AYGO_WE_99G80E
Have the vehicle inspected immediately.
Failure to investigate the cause of the following warnings may lead to
the system op

Page 316 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 316 5-2. Steps to take in an emergency
AYGO_WE_99G80E
Follow the correction procedures.
After taking the specified steps to correct the suspected problem,
check that the warning light goes off.
“VSC

Page 317 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 5
317 5-2. Steps to take in an emergency
When trouble arises
AYGO_WE_99G80E
*1: Driver’s seat belt reminder: 
The driver’s seat belt buzzer sounds to alert the driver that his or her seat
belt is

Page 318 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 318
5-2. Steps to take in an emergency
AYGO_WE_99G80E
If you have a flat tire
Remove the flat tire and replace it with the spare tire provided.
Before jacking up the vehicle
Stop the vehicle on

Page 319 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 5
319 5-2. Steps to take in an emergency
When trouble arises
AYGO_WE_99G80E
Taking out the jack
Remove the luggage floor cover
and spare wheel cover.
Take out the jack.

Page 320 of 372

TOYOTA AYGO 2014  Owners Manual (in English) 320 5-2. Steps to take in an emergency
AYGO_WE_99G80E
Taking out the spare tire
Remove the luggage floor cover
and spare wheel cover.
Remove the tool tray, then
loosen the center fastener.